What is the system variables of document number in General Ledger PLD?

Dear all,
Would anybody kindly tell me what is the system variables of document number in General Ledger Print Layout Designer?
The default print layout use transaction number (system variables 272), however, my client wants document number to be displayed in the transaction number column.
Regards,
Simon Chiu

Hi
The only list available for Supported variables is for the version 2007A and for some specific localizations like Brazil and India.
For the 2007A version the list is available in the following link:
http://service.sap.com/smb/sbo/pld
'How To Use the PLD Variables File in Release 2007 A '
But in general the variables are for documents not for reports.
In this case I believe there's no variable and you may need to fill a requirement in the Forum for that.
Paulo Calado
SAP Business One Forums Team

Similar Messages

  • What is the system variable to find the name of the current window in S.F

    hi
    what is the system variable to find the name of the current window in S.F

    Hi ,
    SFSY_PAGEWINDOW
    regards,
    Prashant

  • What are the systems variables in oracle

    Hai All
    In oracle what is called system variable and types of system variables
    Good answer hepls me
    Thanks & Regards
    Srikkanth.M

    SET System Variable Summary
    Source:http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12040.htm
    Oracle environment variables
    The following environment variables are valid for Oracle::
    ORACLE_HOME
    ORACLE_BASE (optional)
    ORA_NLS (optional)
    NLS_LANG (optional)
    TNS_ADMIN (optional)
    Source:http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsp?topic=/com.ibm.websphere.ii.foundation.conn.fw.orc.doc/configuring/iiylsorcenvvars.html
    ORACLE_SID is the name of the database instance that you are using.
    T2KDEV is set to the type of terminal you are using; sun if you are using openwindows; xsun if you are using X windows.
    TERM is set to the type of terminal you are using. Note: If you are using openwindows, you may have to redefine the variable TERM to sun (instead of cmd-sun) and you should execute ORACLE from a shelltool.
    TWO_TASK is set to the location where ORACLE server can be found and will normally be the name of the database instance. This variable helps simplify the command line for starting ORACLE tools.
    Source:http://ugweb.cs.ualberta.ca/~c391/manual/chapt3.html
    HTH
    Girish Sharma
    Edited by: Girish Sharma on Mar 3, 2010 9:16 AM
    Link and Text added.

  • What is the use of internal document number in excise invoice

    Hi All,
    Could you please explain the use of "Internal Document" number in Excise invoice.
    Regards,
    Mullairaja

    As you would be aware for all types of Excise Transactions like DLFC (for normal sales), GRPO (for goods receiving) etc., system will generate an internal number which is only for reference and this will be a continuous number irrespective of excise transaction type.
    For example, if you generate a sale order, the excise transaction type would be DLFC and let us assume the internal number generated by the system is 11 and immediately, if you generate any other excise document other than normal sales, the internal number would be 12.  This number range you need to maintain in TCode SNUM for object  J_1IINTNUM every year.
    thanks
    G. Lakshmipathi

  • System variable for Warehouse name in Pick list PLD

    Hi Experts,
    My customer would like to show the Warehouse name on the Pick List print layout.
    What is the System Variable to display the Warehouse name on the Pick List?. Iu2019m working with Sap Business One 2007A.. Where can I find the system variables for Chile localization. Thanks Very Much
    Claudia

    Hi Claudio,
    Try this,
    ->> Open the Pick List(System) PLD and Save as the New PLD.
    ->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
    Table -> OWHS - WareHouse
    Column -> WhsName - WareHouse Name
    Save as and Run the Print Preview.
    IF will not print the WareHouse Name in Print.
    Do this in PLD.
    ->> Open your PLD.
    --> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
    Regards,
    Madhan.

  • Hi, after that crash of my MacBook Pro I download again Lightroom 5 with my license serial number removed , but the system say that my number is wrong, but is not. What shall I do???, thanks

    Hi, after that crash of my MacBook Pro I download again Lightroom 5 with my license 1160-4006-5882-6826-4588-7623, but the system say that my number is wrong, but is not. What shall I do???, thanks

    You probably downloaded the Lightroom Creative Cloud version. Your Perpetual License key will not work.
    Uninstall the existing version of Lightroom, this process will not affect your Catalog, Preferences or personal files.
    Then download the correct version from the link below, install and enter the license. Every thing should be just fine. (Also by displaying your License Key for all to see anyone can use it to have a free copy of the program)
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6

  • What is the Successfull processed IDOC status number?

    Hi Experts
    What is the Successfull processed IDOC status number?
    arjent Please.
    Thanks in advance
    Sekhar

    Hi Chandra,
    Below are IDoc Process Codes
    For outboud Idocs:
    1 IDoc created
    2 Error passing data to port
    3 Data passed to port OK
    4 Error within control information of EDI subsystem
    5 Error during translation
    6 Translation OK
    7 Error during syntax check
    8 Syntax check OK
    9 Error during interchange handling
    10 Interchange handling OK
    11 Error during dispatch
    12 Dispatch OK
    13 Retransmission OK
    14 Interchange Acknowledgement positive
    15 Interchange Acknowledgement negative
    16 Functional Acknowledgement positive
    17 Functional Acknowledgement negative
    18 Triggering EDI subsystem OK
    19 Data transfer for test OK
    20 Error triggering EDI subsystem
    21 Error passing data for test
    22 Dispatch OK, acknowledgement still due
    23 Error during retransmission
    24 Control information of EDI subsystem OK
    25 Processing despite syntax error (outbound)
    26 Error during syntax check of IDoc (outbound)
    27 Error in dispatch level (ALE service)
    28 Not used
    29 Error in ALE service
    30 IDoc ready for dispatch (ALE service)
    31 Error - no further processing
    32 IDoc was edited
    33 Original of an IDoc which was edited
    34 Error in control record of IDoc
    35 IDoc reloaded from archive
    36 Electronic signature not performed (timeout)
    37 IDoc added incorrectly
    38 IDoc archived
    39 IDoc is in the receiving system (ALE service)
    40 Application document not created in receiving system
    41 Application document created in receiving system
    42 IDoc was created by test transaction
    50 IDoc added
    For Inound Idocs
    51 Error: Application document not posted
    52 Application document not fully posted
    53 Application document posted
    54 Error during formal application check
    55 Formal application check OK
    56 IDoc with errors added
    57 Test IDoc: Error during application check
    58 IDoc-Copy from an R/2 connection
    59 Not used
    60 Error during syntax check of IDoc (inbound)
    61 Processing despite syntax error (inbound)
    62 IDoc passed to application
    63 Error passing IDoc to application
    64 IDoc ready to be transferred to application
    65 Error in ALE service
    66 IDoc is waiting for predecessor IDoc (serialization)
    67 Not used
    68 Error - no further processing
    69 IDoc was edited
    70 Original of an IDoc which was edited
    71 IDoc reloaded from archive
    72 Not used, only R/2
    73 IDoc archived
    74 IDoc was created by test transaction
    Regards,
    Satish

  • How to split the IDOCS based on document number change whit out BPM

    Hi all,
    Thanks,for giving the responce..
    Scenario:File to IDoc.
    Problum1 : How to Split the IDocs based on document number change in the source file with out BPM.My file contains document numbers like
    20000092
    20000092
    20000092
    50000050
    50000050
    50000065
    I want 3 IDocs in target system.i.e 1 for 20000092,20000092,20000092
                                                       2 for 50000050,50000050
                                                       3 for 5000006
    By using external definations i am getting 6 IDOCs insted of 3.
    Problum 2:Is there any chnges/modifications in Directory when we are using external definations.
    Could u plz provide me the step by step process(Repository/Directory) with using of external definations.
    Thanks in advance.
    Regards,
    KP

    HI,
    for this no need of BPM.
    You can think of Idoc bundling concept to acheive this-just you need to do the external definition to change the idoc occurence
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    to achieve for each document no, one idoc, you can write small user defined function in the mapping with context handling you an achieve this.
    For this e.g
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
    Regards,
    Moorthy

  • What is the importance on BOM Explosiion number

    Hi,
      what is the importance of BOM Explosion number . can any one give me in detail in which context it is used.
      second is valuation type is getting populated in components of a production order. from where this valuation type is flowing to the child components.
    thanks in advance
    madan mohan

    Hi,
    By means of Bom explosion number we can define a common explosion date for all BOM levels.
    The system explodes the BOM that is valid on this date.
    For multi level BOM lareger time intervals may exist between the explosion dates of individual assemblies.If the BOM's have changed mean time a situation may exist where by an assembly that is used repeatedly is produced with a different BOM structure.
    Therefore the BOM should always be exploded with the same date.
    Tcode MDSP
    You need to enter fixed key date,plant material and the status whether active or inactive.
    You can enter the BOM Explosion No in planned order or when creating PIR.
    Regards,
    nandha

  • Using the system variable cpInfoQuizAttempts

    My content is run through an LMS. I am trying to used advanced code using the system variable cpInfoQuizAttempts so that a caption appears when the variable value = 3. Apparently, I can't utilize the value of this variable; in fact, I can't even display it's value in a caption. I am trying to create advanced code on a course page that displays a caption like "You canot take this quiz again because you have already taken it the maximum number of time possible." once someone has taken the course the maximum number of times.  I assume this is the variable Captivate is using to show # attempts on the results page. I tried this with just a user variable but the value of the user variable is not stored or saved on the LMS. Therefore, if you have a maximum number of 3 attempts and someone takes the quiz twice, if he logs off and logs back on, the previous value (2) is not saved and the value reverts to the default (0).
    Any ideas how this could be done?
    KO

    I'm pretty sure that all user defined variables are saved in suspend_data in the LMS. Therefore your user defined variable should be there, but I don't see any way how Captivate would be able to retrieve it again out of the box.
    I think that the cpInfoQuizAttempts variable refers to attempts done in the same "session". So if fail the test and then retry and fail it would have a count of 2. However, once the user exists the course the variable is no longer available to Captivate.
    As Rick said most LMS' have a function to define max / min attempts of a quiz. However, this most likely requires that you publish the quiz as an independant SCO since the "lockout" would apply for that SCO. Basically if you only have one SCO then your users wouldn't be able to access the content or the quiz if they exceded the max attempts. Your content should therefore be one (or more) SCO(s) and your quiz one separate SCO.
    If I'm not mistaken it's also possible to define the max / min attempts in the SCORM manifest, but this is very geeky.
    If you own and can use Flash you could solve your problem two ways:
    1. Create a Flash file that retrieves the user defined variable from the LMS suspend_data and then sends that back into Captivate. Import the Flash file into your Captivate project.
    2. Create a Flash file that stores and retrieves the attempts in a Shared Object on the users PC and then brings the stored value back into Captivate. Import the Flash file into your Captivate project.
    /Michael
    Visit my Captivate blog with tips & tricks, tutorials and Widgets.

  • System build-in or system variable to get number of records from a query

    Hi,
    Is there a system build-in or system variable to get number of records from a Oracle Forms query?
    Thank you

    Namely, when GO_BLOCK(BLOCK_NAME) EXECUTE QUERY finishes, is there a way directly get the number of the records?
    SYSTEM.COURSOR_RECORD = 1 tells this is the first record
    SYSTEM.LAST_RECORD = 'TRUE' tells this is the last record
    Thanks

  • AR AUTOINVOICE ignores the checked box "copy document number to transaction

    dear ,
    AR AUTOINVOICE ignores the checked box "copy document number to transaction number"
    I setup the batch source as check "copy document number to transaction number" but when
    I import the invoice by auto invoice I found the transaction number is 2 and
    the document number is 1
    That mean the system ignore the check box in definition of batch "copy document number to transaction number"
    Facts: Navigate -> Setup -> Transactions -> Sources
    Setup Transaction Source with Automatic Transaction Numbering checked and Copy Document Sequence Number to
    Transaction Number checked.
    Navigate - > setup -> system option  tab (transaction & customer)
    Document number generation level: when completed
    Expected Behavior:
    The Expected Behavior is that when I checked the "copy document number to transaction number" in definition of the source
    AR Auto Invoicing must assign the document number to transaction number
    Business impacts :
    There is gaps with the sequence number for the invoice that not accepted from the finance auditor in the last of the year
    thanks

    check have u performed these steps or not.
    you have to do all the necesarry set up steps:
    1) Enable the Sequential Numbering Profile Option
    2) Enable the AR: Document Number Generation Level Profile Option
    3) Check Copy Document Number to Transaction Number box on Transaction Sources
    4) Define Sequences
    5) Assign Sequences to Categories
    In batch source definition for your invoice, there is a flag for 'copy doc num to trx num'. is it ticked?

  • The system variables in java, NEEDED ONLY at CLI execution of java programs

    The system variables in java, NEEDED ONLY at CLI execution of java programs, and NOT needed at all[essentially] if I install bundle(14+6.7)?
    if I install bundle(14+6.7) to run-test a web app with netbeans 6.7 what I must press, then opens the default browser? I have to be online,...? How I test browse my project?

    Probably a complete tutorial on all possible environment variables in addition to a tutorial on netbeans configuration.

  • The A dso SALES Document number is equal to B dso sales document number the

    Hi All,
                         i have two dso's ( A&B).I CREATED B DSO With the reference of A dso. and i loaded the data to B DSO. All the loads were done.now i am planning to compare the records throug ABAP Program.in the abap progran i am plaaning to write
    this type of logic that is where the A dso SALES Document number is equal to B dso sales document number then data is need to capture.how can i write this type of logic.
    thanks & Regards,

    Hello
    Do you mean , in your ABAP reoprt, you need to show all records from dso A which are there in dso B?
    you may code on follwoing lines.
    itab_A like /bic/Adso_A00.
    itab_B like /bic/Adso_B00.
    itab_result like /bic/Adso_A00.
    select * from /bic/Adso_A00 into table itab_A
    select * from /bic/Adso_B00 into table itab_B
    loop at itab_A.
    read table itab_B where sales_docno = itab_A-sales_docno.
    if sy-subrc = 0.
    append itab_A into itab_result.
    endif.
    endloop.
    hope that helps!
    regards,
    sanjyot

  • Problem in picking the system variable value in Calculation Script

    Hi All,
    We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
    Now I am using this system variable in the calculation script as below:
    //ESS_LOCALE [email protected]
    SET DATAEXPORTOPTIONS
    DataExportLevel "ALL";
    DataExportOverwriteFile ON;
    Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
    DATAEXPORT "File" " " $DEXPORTPATH;
    ENDFIX
    Here "DEXPORTPATH" is the system variable
    I am creating this system variable from the batch script and the system variable value varies at the runtime.
    This calculation script works fine for first time and it picks the correct value from the system variable.
    But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
    Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
    The calc script works fine with this.
    For next execution, system variable value is changed to "D:\Time\temp.txt"
    Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
    and performs execution which is wrong.
    Please help me on this issue how to handle system variables in calc scripts.
    Thanks in advance
    Regards
    Swathi

    811829 wrote:
    Hi All,
    We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
    Now I am using this system variable in the calculation script as below:
    //ESS_LOCALE [email protected]
    SET DATAEXPORTOPTIONS
    DataExportLevel "ALL";
    DataExportOverwriteFile ON;
    Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
    DATAEXPORT "File" " " $DEXPORTPATH;
    ENDFIX
    Here "DEXPORTPATH" is the system variable
    I am creating this system variable from the batch script and the system variable value varies at the runtime.
    This calculation script works fine for first time and it picks the correct value from the system variable.
    But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
    Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
    The calc script works fine with this.
    For next execution, system variable value is changed to "D:\Time\temp.txt"
    Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
    and performs execution which is wrong.
    Please help me on this issue how to handle system variables in calc scripts.
    Thanks in advance
    Regards
    SwathiAs of my knowledge system variables will not update immediately...you need to log off the session after changing the value.
    Update the system variable..
    Log off from the session..
    And Re-login with the same username ....and check...
    Regards,
    Prabhas

Maybe you are looking for

  • Finding selected event in iCal

    I want to run a script that processes the currently selected iCal event / todo. (sync it with a Filemaker DB). I cant find a command that returns the selected/current/active iCal object. I can only find an object one with a given property value. I'm

  • Is it possible in oracle?(need very badly)

    Hi, I need to write a select statement for a report and i need to check with previous record. here I'm giving the data and table structure also. conditions are : seltest is variable in there we have to show Y Or N extension is null and service center

  • New T430s has exposed circuit board

    Thought I would start a new topic after mentioning it in a thread about loose arrow keys... I can see the inside of my T430s from a gap at the back of the keyboard. I can actually see green circuitboard exposed there if I shine a flashlight through t

  • How to Apply!!!  xMSA Online SR04 in portal

    I have downloaded xMSA Online SR04 but unable to apply the patch. I have tried through SDM and JSPM are there any other way. Are there any pre-requsites.

  • Events or attributes triggered by data coming from a data file

    Without using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? If not, does anyone know or have some scripting suggestions to do that. For examplle if the value in a textbox was greater than 10 coming f