What is the tcode for creating a variant ??

Dear Guru,
I want to know What is the tcode for creating a variant  which is being used for SM30 's variant option .
Because we have created a maintenance view and we want to run this trhough tcode..
but dont know how to do it.
pls guide through out the procedure.
thanks & regards
Saifur rahaman

Hi,
If you want to create the TCODE for the TMG you created you must go for Parameter Transaction
Go to SE93
Give your Tcode
Click Create , select parameter transaction Radio Button
In the Transaction Field Give SM30
Check the Check box SKIP INITIAL SCREEN
select your GUI support and SAVE
in the space provided give F4
Select        VIEWNAME and give your table name
Select                  UPDATE  give it as X
then SAVE
Edited by: Prasanth Kasturi on Nov 25, 2008 6:54 AM

Similar Messages

  • What is the tcode for creating material receipt

    Hi,
    what is the tcode for creating material receipt & payment to the vendor

    Hi,
    You recieve your material from the vendor and do a Goods Reciept in MIGO with mvt 101. You can even enter via T-Code - MB1C.
    Once you get your Invoice for this reciept from your vendor, you then do invoice verification in MIRO.
    After verification, if there is no blocking of the invoices and is posted and released, a accounting document is released during the posting of MIRO. These documents are then referred by FI pals, who are responsible for the payment.
    Hope this gives you a clear picture.
    Anand
    Message was edited by:
            Anand.B.K.

  • What is the Tcodes for Uploading of data using BDC & CATT

    PP members:
    I was going through the <b>cutover activities</b> ,  and what I understood is  we transfer all the legacy system data into SAP before going live
    The data upload follows certain steps (depends on the organizational design load strategies)
    First we upload all the master data ( material master, BOM, W/C's & Routings)
    Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
    If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
    At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
    Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
    Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
    Lastly,. I am not sure about the Tcode of CATT & BDC
    Summary of the questions:
    1.What does the author mean  <b>material of previous stage</b>, for WIP materials during cutover activities
    2. Is it mandatory to use only LSMW tool for uploading for master data
    3. What are the Tcodes for upload tools CATT & BDC ?
    Thanks for your time
    Suren R

    Dear,
    1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
    2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
    3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

  • What is the Tcode for WBS Hierarchies in R/3

    Hi All,
    What is the Tcode for WBS Hierarchies in R/3? and more over how can we include WBS element groups in our bw reports.
    and one more does any relation between WBS element Hierarchy and WBS element Group
    Regards,
    Sekhar

    Hi Shekar
    CJE0    Run Hierarchy Report
    CJE1    Create Hierarchy Report
    CJE2    Change Hierarchy Report
    CJE3    Display Hierarchy Report
    In a work breakdown structure (WBS), you describe the individual tasks and activities in the
    project as individual elements in a hierarchy.
    Depending on the phase of your project, you continue to break down the tasks and activities in
    your project, step-by-step, until you reach the level of detail necessary to carry it out.
    The individual elements represent activities within the work breakdown structure. The elements
    are called work breakdown structure elements (WBS elements) in the Project System. WBS
    elements can be:
      Tasks
      Partial tasks which are subdivided further
      Work packages

  • What is the Tcode for document header.

    HI all.
    What is the Tcode for document header.

    Hi,
    Post Document: Header Data (FBR2)
    Purpose
    Use this procedure to post a new document referencing (copying all or part) of an existing document.  This process will also allow the user to reverse a document that cannot be reversed using transaction FB08.
    Trigger
    Perform this procedure when there is a need to post with reference an existing document to create a new document.  Or to reverse a document that cannot be reversed using transaction FB08.
    Prerequisites
    Before beginning this task, obtain the following information.
    ·         Document number and fiscal year of the document to be referenced or reversed
        Document being referenced must be a posted document.
    ·         If applicable, the reversal reason code
    Menu Path
    Use the following menu path(s) to begin this transaction:
    ·         N/A
    Transaction Code
    FBR2
    Helpful Hints
    Generate reverse posting can be used when using transaction FB08 is not possible.  Examples provided below.
    ·         Original document types such as WA and ZF cannot be reversed using the FB08 transaction
    ·         Document was already reversed but the reversing document is incorrect
    ·         Document to be reversed is a reversing document
    ·         R/O/C/D indicates a field is required, optional, conditional (dependent upon another selection) or the information defaults (based on previously entered information or system configuration)
    Reward if helpful
    Jagadish

  • HOW TO KNOW THE TCODE FOR CREATING A NEW ENTRY IN A PARTICULAR TABLE

    HI,
        CAN YOU PLEASE LET ME KNOW THE PROCEDURE TO GET THE TCODE FOR CREATING A NEW ENTITY IN A TABLE .
       EG: IS THERE ANY PROCEDURE TO KNOW THAT IF I CREATE A NEW ENTITY IN MM01 IT WILL BE STORED IN TABLE MARA.
    THANKING YOU.

    Hi Venkata,
    If you want to know, for a given table, which transaction/program(s) will create a new record,  there is no easy procedure, other than to refer to experts who deal with these programs.
    It is possible to get a list of programs that refer to a table.  SE11, select the table, select the 'where-used' icon, select programs, execute.  You will be presented with a list of programs that read or write to that table.  From that list you would have to determine which one(s) create records, using your ABAP skills.  From those selected programs you would have to find which, if any, had a transaction assigned.
    Many tables are updated by more than one program/transaction.  Many other tables are not updated by ANY interactive transaction.
    If you ever decide to go ahead with this research, make sure you publish it.  You could probably make yourself a bit of money.
    Regards,
    DB49

  • What is the use for CREATING VIEW WITH CHECK OPTION?

    Dear Legends,
    I have a doubt
    What is the use for creating view?
    A: First Data Integrity, Selecting Particular Columns..
    What is the use for creating a view with check option?
    A: As per oracle manual I read that its a referential integrity check through views.
    A: Enforcing constraints at DB level.
    A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
    A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
    Please clear my doubt's Legends
    Lots of Thanks....
    Regards,
    Karthik

    Hi, Karthick,
    karthiksingh_dba wrote:
    ... What is the use for creating view?
    A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
    Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
    Views are necessary for INSTEAD OF triggers.
    What is the use for creating a view with check option?
    A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
    A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
    A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
    A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

  • What is the tcode for plant wise g/l account list

    Dear Experts
    Can you help on this "what is the tcode for plant wise g/l account list"
    Regards
    B

    Hi Bhaskar,
    G/L accounts wont be plant wise.It will be either chart of accounts level or compant code level.
    The best thing you can do is to derive the company code for the plants from the table T001K assuming the valuation level is at plant level.
    Now after deriving the company code go to transaction SE16 and give the company code derived above in the table SKB1 and generate the G/L account list.
    Hope this is clear if not  please clearly explain more elaborately on the exact requirement why you need plant wise g/l account list for appropiate solution.

  • What is the TCODE for number change of idoc

    Hi all,
    can anyone help me in chnaging the number range of IDOCS in R/3 system..
    what is the TCODE for that...
    Thanks in advance.
    Cheers,
    Raghavesh

    Hi,
    Please go to transaction SNUM/SNRO and use object EDIDOC.
    Select number range and change to specific number that you wish.
    Hope this will help.
    Regards,
    Ferry Lianto

  • What is the tcode to created standard text to include in sap script

    HI
    what is the tcode to created standard text
    i want to include  standary text in sap script
    regads
    Arora

    Hi ,
    If you want to upload a logo , then u can use program RSTXLDMC if it is in .TIFF format or if you want to upload a grphic which is in .bmp then u can use SE78 or directly u can use SO10 also.
    SAPScript Transaction codes
    SE71 - Form painter
    SE72 - Style maintenance
    SE78 - SapScript Graphics Management
    SO10 - Create standard text module
    Reading Text in SAPScripts
    If you only need to output the text, you don't need to used READ_TEXT like in an ABAP program,
    just use the INCLUDE command in SAPScript.
    It will read the text and output it to your form.
    The Syntax is like this:
    /: INCLUDE &T166K-TXNAM& OBJECT &T166K-TDOBJECT& ID &T166K-TDID& LANGUAGE &EKKO-SPRAS&
    Check the following link:
    http://sap-img.com/sapscripts.htm
    Regards,
    Raghav

  • What is the tcode for Nominee Form 2 ?

    Dear Mates,
    Kindly help to me what is the Tcode for Nominee Form 2 ?
    Ur's Mohan

    Dear Sandeep,
    Yes we have maintained IT 591 & i didn't any output in EPF report related to this info type 0591. Anyway now my client is asking me form 2 for nominee details kindly let me know is there any tcode?
    Ur's Mohan

  • What is the prerequisite for creating two hierarchies from one fact table i

    Hi,
    what is the prerequisite for creating two hierarchies from one a single fact table.
    Rgds,
    Amit

    create global temporary table t1 as select * from trn_ordbase on commit preserve rows;You CANNOT use this syntax.
    http://download-east.oracle.com/docs/cd/B19188_01/doc/B15917/sqcmd.htm
    http://download-east.oracle.com/docs/cd/B19188_01/doc/B15917/glob_tab.gif
    http://download-east.oracle.com/docs/cd/B19188_01/doc/B15917/cre_tabl.gif

  • What is the tcode for Run ''Remittance Completeness Check''

    Hi all,
    What is the tcode for Remittance completeness check ?
    Thanks
    Jerry

    Hello Jerry,
    The transaction to program RPURMC00 is PC00_M99_URMC.
    I hope this information is helpful.
    Kind regards,
    Graziela

  • What is the Tcode for Aggregate Statstics Table and PSA table

    What is the Tcode for Aggregate Statstics Table and PSA table

    Hii raina..
    There is no such perticular Tcode to check PSA data . Go to RSA1 and open ur DS . Right click and say manage. U will get PSA data.. But their should be data in PSA 
    I hope thjis is useful to u.

  • What is the Tcode for Zform

    what is the Tcode for Zform

    Hi Basha,
    Transaction code: SE71 can be used for form/script/layout.
    Transaction code: SE38 can be used for print/driver program.
    Hope this helps.
    Thanks,
    Srinivasa

Maybe you are looking for

  • How to set a page header and footer of an excel file i'm creating

    Hello ! SORRY MY ENGLISH is very BAD. I tried to set page header and footer in Excel sheet with ABAP  ole DATA : BEGIN OF enter, x(1) TYPE x VALUE '0D', END OF enter. DATA : format(255) TYPE c. FORM set_page_sheet. CALL METHOD OF excel 'ActiveSheet'

  • Cannot Create Index in EHP 4 System

    Hi there, We got an Enterprise Search 7.0 and some SAP Systems (ERP 6.0 and a NEW IDES ERP EHP4). In the ERP 6.0 I can create all Indexes I want to have. Starting SES_Admin, create Index and go. I the new EHP 4 System (IDES) it's not possible to crea

  • FLV source file audio not importing?

    I use Adobe Connect to record online class session. I then convert the recordings to FLV files. I can play the FLV file using Real Player - video and audio are great. However, I would like to convert the FLV file to H264 (MP4), which is easier for my

  • Supress Warning on SQLPLUS output

    Hello! So, how can i supress warnings on sql plus output? Let me explain I have a install script with procedures and somethings have error dependences, this is ok, but i would like remove the "Warning: Procedure created with compilation errors" when

  • Id3 tags for songs already on the ipod

    I have properly edited my id3 tags for songs already on the ipod. How can I update the tags for the same music that is on my PC???