What is the use of T.Code FBZ2

Hi Experts
I want to know the use of T.Code FBZ2 and what is the difference between the F-53 and FBZ2?
Can I print the cheques or Payment Advices for the T.Code FBZ2.
Please clearify my doubt.
Thanks.
Priya

HI, priya,
it is not possible to use fbz2 becz as per SAP standard you have to use for payment advice f-58 tr.code only come to fbz2 is the manual say suppose if you want to change document type u can use that tr.code and that is not advisable.
better to use f-58 if you want payment advise.
Regards,
saltish

Similar Messages

  • What is the use of T. code cj8g

    Hi All,
    Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
    Thanks in Advance.
    Chandu

    CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
    CJ88 processes the settlement individually.
    For settlement to run, you need to do certain configuration and maintain the master data;
    Configuration:
    Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
    Settlement Profile
    Master data:
    Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
    Regards
    Sreenivas

  • What is the use of restriction code in the ipod?

    i'm just wondering what's the use of restriction code because i have this problem, i wanted to lock the camera whenever someone takes a picture on my ipod they can't delete and upload it to there computer, so how to will i do that or how to do that thing?

    Yes, you can setup/turn on restrictions to prevent use of the Camera app.  See:
    iPhone, iPad, and iPod touch: Understanding Restrictions
    Make sure you do not have any third-party camera apps installed and turn on the restriction that prevent installing apps.

  • What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI?

    Expects...
    What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI
    Accounting> Financial Accounting> General Ledger> Corrections> FAGLCOFIFLUP - Post CO Documents to FI
    Thanks & Regards
    Bhagiradha.P

    Hi,
    The real-time integration of Controlling with Financial Accounting was active at the time the CO documents were posted.
    CO documents could be not transferred to financial accounting on behalf of errors which are only known to occur in the following situations:
    - During mass processing such as internal CO assessments or distributions
    - Manual posting of individual CO documents is not possible if errors occur in financial accounting.
    - If real-time integration was not active when the CO document was posted, you must use the report   FAGL_COFI_TRANSFER_CODOCS to transfer these CO documents to financial accounting because they are not in the worklist.
    Regards,
    Eli

  • What is the use of transaction code FAGLGA15

    What is the use of transaction code FAGLGA15.What is its functionality.Please help.

    Hello,
    Yes, you are right. Before ECC 6.0 version the TC: KSU5 has been used for actual assessment. Now in ECC 6.0 the same transaction code has been changed to FAGLGA15. You can execute the actual assessment in test run and if it is ok then run in background.
    Thanks
    Para

  • What is the use of  SWIFT CODE IN BANK ACCOUNTS

    What is the use of  SWIFT CODE IN BANK ACCOUNTS

    HI kishore,
    The SWIFT code is used for identifying banks in international payment transactions.
    see these links for your refernece
    http://sapexperts.blogspot.com/2007/01/bank-accounts.html
    http://www.answers.com/topic/international-bank-account-number
    thanks
    karthik

  • What is the use of transaction code VF24

    what is the use of transaction code VF24. if possible please provide some documentation

    Hi,
    The main use of VF24 transaction code : edit work list for invoice list.
    This enables the user to understand the processes left during the combine processing of invoices.
    like which are left for releasing to accounts, which have still pending payment posting, with respect to the invoice list consisting of the combination of invoices.
    invoice list is a combination of different invoices with same critierias. so to check and process these invoice lists collectively this function is used.
    regards,
    siddharth.
    regards,
    Siddharth.

  • What is the use of t-code MD74 - Reorganising independant requirements

    what is the use of t-code MD74 - Reorganising independant requirements

    basically it to delete the unwanted PIR for the last period.
    Let us say you planned PIR for 100.
    At the end of Period the total salae order were 90, PIR shows 10 excess, this has to be deleted. We can do it manually, but this can be done collectively
    pl go through the link below
    http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
    With the reorganization function, you can delete planned independent requirements for which there are no sales orders in the database. You can delete the planned independent requirements history.
    A key date is required to carry out reorganization which is calculated as follows: the system checks whether a reorganizing interval is maintained in Customizing for the plant that you want to reorganize. If an interval is maintained for this plant, the system uses this information to calculate the key date. If no interval is maintained for this plant, the system checks whether intervals are maintained for any other plants, and selects the largest interval to calculate the key date. You can change the key date proposed in the initial screen for reorganization.
    You can change the proposed key date when deleting the history. You can set a shorter interval for deleting histories than for deleting the requirements records.

  • What is the use of T-code COMAC ?

    Hi all,
    I want to know the use of T-code COMAC and What is the significance of two tabs u201Cselectionu201D and u201CMass processing-material availability check ?u201D in this T-code.
    Thanks

    hi,
    In collective availability check, you can check the material availability of several orders at the same time. These collective availability checks always carry out an overall availability check for each of the orders.
    You can check production orders or planned orders in this way. As with individual checks, the checking rule is determined via the order type (production orders) or the MRP group / plant parameters (planned order).
    On selection tab page you can restrict your selection plant wise, material wise,for production plant, for production plant,for mrp controller and so on other selection criterias are there.
    Mass processing-material avail.check in function field you can select matl.avail.check and execute function let's you to start the function immedeately or in the background.
    regards,
    Lodhi.S

  • What is the use of T Code in RSRR in R/3 system?

    Hi
    Can anyone explain what is the use of RSRR tcode: BW RRI on the Web
    in R/3 system.
    How to use it?

    CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
    CJ88 processes the settlement individually.
    For settlement to run, you need to do certain configuration and maintain the master data;
    Configuration:
    Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
    Settlement Profile
    Master data:
    Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
    Regards
    Sreenivas

  • What is the use of t-code rsa3??

    use of T-code::RSA3??when 2 use it and how 2 use it??

    Hello,
    Tcode RSA3 is an extractor checker.
    Uses: It will give you the number of records extracted. Then go to BW Monitor to check the number of records in the PSA and check to see if it is the same & also in the monitor header tab.
    RSA3 is a simple extractor checker program that allows you to rule out extracts problems in R/3. It is simple to use, but only really tells you if the extractor works. Since records that get updated into Cubes/ODS structures are controlled by Update Rules, you will not be able to determine what is in the Cube compared to what is in the R/3 environment. You will need to compare records on a 1:1 basis against records in R/3 transactions for the functional area in question. I would recommend enlisting the help of the end user community to assist since they presumably know the data.
    To use RSA3, go to it and enter the extractor ex: 2LIS_02_HDR. Click execute and you will see the record count, you can also go to display that data. You are not modifying anything so what you do in RSA3 has no effect on data quality afterwards. However, it will not tell you how many records should be expected in BW for a given load. You have that information in the monitor RSMO during and after data loads. From RSMO for a given load you can determine how many records were passed through the transfer rules from R/3, how many targets were updated, and how many records passed through the Update Rules. It also gives you error messages from the PSA.
    Hope it helps.
    Regards,
    Amit

  • What is the use of AB08 ?

    Dear All,
    Experts,
    Can anybody tell me what is the use of  T.code AB08 ? ( Documents for Assets )
    Regards,
    Pankaj.

    Hi, take a look on this:
    [http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71fd71448011d189f00000e81ddfac/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71fd71448011d189f00000e81ddfac/frameset.htm]
    Be careful when you have an asset with several transactions, and you want to reverse a transaction that is chronologically immediately after a negative transaction. In this case, you may have to reverse the negative transaction as well, since the net book value of the asset could become negative after the first reversal.

  • What is the use of provision account in vkoa t.code

    Hi,
    i have a doubt regarding in vkoa t.code there are G/L Accounts column and Provisions column what is the use of provision column and what is the difference between these two.
    i am waiting for u r replies.
    Thanks & Regards,
    Kishore.

    Hi,
    'The provision account is only required if there are conditions that are relevant for accrual, for example, rebate conditions. If this is the case, account determination takes place in the billing document with the field'
    In other words it will be used to store the valuue of a( for eg.,Rebate) condition type in a different GL a/c for the periodic calculation of the total value of the same cond.type...
    chk this thread for more clarity on Accrual
    Re: Rebate Accrual Rate
    Reg
    JJ
    Edited by: Jagsap on Jul 10, 2009 1:03 PM

  • What is the Purose of t-code IL06 how to use it....

    hi
    what is the purpose of T-code IL06 AND  how to use it
    regards
    ganesh

    Hi
    refer the following thread
    Plant Maint  t-code IL06
    regards
    thyagarajan

  • What is the Use of u0093Over write CC Areau0094  In the Assign'of C.Code to CC area

    Dear GURU’s
    In the Assignment of Company code to Credit Control area what is the use and meaning of “Over write Credit control Area” field. Kindly guide me with an example.
    When I checked in “F1” it is saying that
    "Indicator: Can credit control area be overwritten?
    Use
    If you set this indicator, you can overwrite the credit control area defaulted from the company code's global data.
    This applies only to document posting.
    When making changes to documents, you cannot change the credit control area."
    I did n’t understand what does it mean.
    Regards,
    Bhanu

    Hi Bhanu,
    There is a option to enter the Credit control area in the company code global parameters(OBY6).When you do this,when ever you did not enter a credit control area or the system could not determine one, the cerdit control area is defaulted from the OBY6 screen.
    Now if you want to overwrite this defaulted value,you can check box this.
    Hope im clear
    Thanks
    Aravind
    Assign points if useful

Maybe you are looking for