What PM work order can be used for improvement work in SAP PM?

We have the following work orders in PM:
PM01- preventive maintenance order
PM02-breakdown maintenance order
PM03-general maintenance order
PM04-refurbishment order
PM05-calliberation order
PM06-predective maintenance order
We need a work order that can be used against all tasks related to improvements, performance enhancements.
Does any existing work order holds these charasteristics?

Hi
In my opinion any work which will enhance the life of the equipment/asset then it should be under capital investment order and for other enhancement/performance you can define another order type like Upgradation/Alteration of Machinery.
Regards,
Anupam Sharma

Similar Messages

What brands and type can I use for my iMac 20" internal Hard Drive?

what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
can I use WD caviar black?
is it too hot?

If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
To answer your questions...
You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK.

What kind of inforobject can be used for compounding while creating charac

Hi all :
     what kind of standard inforobject can be used for compounding while creating characteristic ?
    I found that some could be , but some couldn't , like 0RESP_PERS.
THE ERROR :
1      Characteristic 0RESP_PERS was included in the compounding for COS09 (-> Long Text)      QLong text exists
2              0RESP_PERS is just an attribute and is not allowed in the compounding No long text exists
0RESP_PERS is an object, why can't be used for compouning?
Could you please tell me why ?
   Thank you very much!
Edited by: jingying Sony on May 10, 2009 7:05 AM

Hi Jingying Sony,
One can mark an infoobject as an Attribute Only in the General tab.
This means that the infoobject will only act as an attribute and cannot be used as a characteristic in infocubes. Neither can it be used as a navigational attribute and I guess it may not be available for compounding then(since in compounding - it implicitly becomes a characteristic).
For your ref
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
If you uncheck this checkbox, then may be it will allow you to compound this characteristic..
You may try with a (self created) ZRESP_PERS reference chararacteristic of 0RESP_PERS, to confirm this.
One more link for your reference
http://jgtang82.javaeye.com/blog/191795
Hope this helps,
Best regards,
Sunmit.

What word processing app can I use for an old mac (2007)

I have just bought a MacBook Pro with no word processing app. When I visited the Apple store I was informed that the OS was out of date for Pages 5. Being new to Apple I am at a loss as to what to do. I would rather listen to some seasoned heads!!

Welcome to Apple Support Communities
New Macs come with the iWork applications for free, including Pages, which is a word processing application.
To install it, you have to open the Mac App Store. You can find it in the Dock (at the bottom of the display) with this icon:
Then, at the top of the App Store window, choose Purchases, and you should see three apps waiting to be accepted: Keynote, Pages and Numbers. Accept all of them and they will be downloaded and installed.
If you do not see them listed there, see > http://www.apple.com/creativity-apps/mac/up-to-date/

Appleworks does not work with mountain Lion. What can I use for drawing and painting?

Appleworks does not work with mountain Lion. What can I use for drawing and painting?
MacBook
Marian

Please see this article which examines various possible alternatives to AppleWorks:
http://rfwilmut.net/aw

What type of headset with microphone can be used for softphone on ipad?

what type of headset with microphone can be used for softphone on ipad? ideally wireless, if not a simple one not too bulky

I use the same bluetooth headset that I use with my iphone, Jabra.
and in using skype or other voip apps, it works just like my iphone does.

What can be used for replacing SELECT SINGLE *   ?

What can be used for replacing SELECT SINGLE * for improving the performance in the following statements?
SELECT SINGLE * FROM REGUV
   WHERE LAUFD = G_WLAUFD "RUN DATE ,SY-DATUM
     AND LAUFI = P_LAUFI. "IDENTICATION NO
SELECT SINGLE * FROM T100
   INTO CORRESPONDING FIELDS OF G_T100_WA
    WHERE SPRSL = G_T_IALLMESS-MSGSPRA
      AND ARBGB = G_T_IALLMESS-MSGID
      AND MSGNR = G_T_IALLMESS-MSGNR.
SELECT SINGLE * FROM TBTCO
   INTO CORRESPONDING FIELDS OF TBTCO
    WHERE JOBNAME = FS_JOBNAME.

If you need all the fields and you know that only one record exists then u need to use select single * only. You can improve the performance by specifying key fields in the where clause of select statements. If the structure of the work area or internal table in which you are fetching the data is same as that of the database table then no need to use corresponding fields clause.
Best Regards,
Vibha
*Please mark all the helpful answers

What can I use for a low battery warning on a Mac Book OSX10.8?

What can I use for a low battery warning on a Mac Book OSX10.8?

What you should see above all your windows when your battery gets to low.

What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.

What Malicious Software Removal Tool can I use for my Mac Book? I need do to do this for a College class.

You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

All six Uk carriers carry the iPhone officially and micro sims are very common therefore
PAYG is very common in UK every carrier offers a number of packages but all commitment free
http://support.apple.com/kb/ht1937
List of Turkish Carriers within this doc

What photo gallery can I use for a Mac OS X version 10.6.8 with 1GB memory?

what photo gallery can I use for a Mac OS X version 10.6.8 with 1GB memory?

What do you mean by photo gallery? Are you referring to what version of the iPhoto application? What version came with your iMac?
iPhoto 8.1.2 would be a good choice for that system and limited amount of memory. It comes on the iLife 09 disc which is available from 3rd party vendors like Amazon.com or eBay.com.
If you can add memory to your iMac do so. Increasing memory to 4 GB will do wonders for the speed of the system and applications.
OT

What Extractor can be used for this purpose?

Hi all
I have a requirement for a new report. The user wants to get a report regarding inbound cost saving including materials, material group, MRP controller, vendor, date, qty, actual inbound transportation cost, standard transportation cost which is fixed in SAP and variance between actual and standard.
Can any one advice me what Extractor and Extract Structure can be used for this purpose?
Thanks in advance
Ishi
Edited by: eletter on Sep 28, 2009 11:11 AM

Hi
Extract structure
The extract structure, data from a DataSource is staged in the source system. The extract structure contains the amount of fields that are offered by an extractor in the source system for the data loading process.
Extractors
Extractors is a data retrieval mechanisms in the SAP source system. Which can fill the extract structure of a data source with the data from the SAP source system datasets. The extractor may be able to supply data to more fields than exist in the extract structure.
Hope this helps you
santosh

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

What kind of camera can I use??????

I need to measure crack length in fatigue test of an Aluminium sample automatically. For example, the camera can take shots (Images) every 4000 cycles (fatigue load cycles), maybe more cycles.
For my test, I need to measure both sides crack length (right side and left side of specimen centre line), shown in Fig1. So I need to take shots both crack tips at the same time, which means camera must have a large field view and the resolution should measure 0.01mm, to see both crack tips clearly. At the end, I must be able to acquire images from Labview. I can save all the images into my fold from Labview, then I can measure crack lengths in left and right side from every image. Fig1. sample size and crack tip
Would you please give me any suggestions on the characteristic/specifications of this kind of camera?
What kind of camera can I use? How much this kind of camera? Where can I order this kind of camera?
Attachments:
camera-Fig13.jpg ‏16 KB

Hi Cran.
You might want to put this topic into the Hardware Forum instead.
It seems that this isn't much of a LabView question......
Regards BCL
Don't forget to rate a good Answer....
Here should be some cool signature
But there's NOT
LV7Express, LV8.5.1

What is the best editor to use for JSP/Servlet?

Hello,
What is the best editor to use for JSP/Servlet database development.
I'm looking at Dreamweaver,Java Studio Creator.
I want some thing fairly easy to use that has database helper wizards like dreamweaver.
Thanks for the help.
Frank

Is it better to have a servlet do the database work and call it from JSP?No, it's better to have persistence objects do the database work. Servlets handle HTTP requests, and JSPs are HTML factories that should be pure view.
But there are lots of ways to do things. You just have to understand the tradeoffs when you decide.
I do not want to hammer out code, I want to learn the
best way to do things from experienced developers. Sorry, sounded like you just wanted to churn stuff.
"best way" can be subjective. In one app, "best" might be "delivered fastest". For another, "best" might be "most secure" or "most easily modified" or "best performing" or whatever. You won't get a "best" answer, only different choices. And they aren't always so easy to explain or execute.
I'd recommend that you start by reading about layered applications (3-tier architectures) and MVC separation. Once you've Googled enough about that, look into a framework like Struts or Spring or WebWork. That'll help you figure out where to put each responsibility in your app.
I can use dreamweaver to create web apps, but I hate
the arrays used to define fields. It also seems not
to take advantage of connection pooling.Don't know what you're talking about here, Frank. What do fields have to do with connection pooling?
%

What PM work order can be used for improvement work in SAP PM?

Similar Messages

Maybe you are looking for