What problems faced during implementation BW projects few eg:  Please

Hi BWers,
Please, can you give me some examples regarding
" what problems you faced during implementation of BW projects.
Thanks
points will be given with big heart.
Again Thanks
Regards
Mubeen.

Hi,
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Details on the Implementation Phase
http://help.sap.com/saphelp_nw04/helpdata/en/2c/36177e645911d395fe00a0c94260a5/frameset.htm
Hope this helps.
Thanks,
JituK

Similar Messages

  • Problems faced during BW3.5 to BI 7.0 Security Upgrade

    Hi everyone,
                 We are planning to do an upgrade on our current BW 3.5 to BI 7.0. Could anybody share their experience on the problems you've faced during the upgrade and a model solution/precautions. I have completely gone through the documentation provided by SAP. But  still wanted to know things that i have to be aware of.

    Hi Jagadesh,
    There is no document as such which provides you the step by step information on the upgrade. However, if you doesn't have fair idea on BW and BI, I recommend you to take assistance of your team members, since a simple incorrect step may lead to severe issues. Even though there is no production impact, your management needs this system live always for reporting
    If you still wish to take up the task on your own, I wish you all the best Here is an outline:
    First decide on the mode of upgrade (Automatic or manual) and follow the steps below:
    1. Enable analysis authorization using RSCUSTV23
    2. Specify how the existing BEx Anlayzer is called using RRMX_CUST
    3. Identify the roles, profiles, and BI related auth objects
    4. Activate business contet related InfoObjects (0TCA* and 0TCT) and InfoCubes (0TCA) using RSA1.
    5. Make 0TCAACTCT, 0TCAIPROV, 0TCAVALID infoobjects as authorization relevant from RSD1.
    6. If you are using automatic migration, use RSEC_MIGRATION from SE38 and follow the steps.
    7. Incase if manual migration, follow the steps provided in the previous post.
    8. Create anlaysis authorizations using RSECADMIN
    9. Adjust the old roles with new authorization objects.
    10. Test the new setup and go-live
    Hope this helps!!
    Regards,
    Raghu
    Edited by: Raghu Boddu on Dec 15, 2010 2:39 PM

  • Problem facing while implementing FSCM-Collections Management

    Hi,
    I am doing the FSCM-Collections Management implementation in my current project.I have implemented everything but i got struck up while bringing the"Customers in to Business Partners" (In collections management Business partners are nothing but Customers).
    Note: The requirement is -Once you bring the customers as business partners in Collections management module,What ever the changes you made to Customers in FI module,the same changes will be done in Collections management Business Partners also.
    So,now i am not able to Bring the Customers to Business Partners in Collections management.Kindly help me how can i bring the customers of FI into Collections Management.
    Thanks
    Supriya

    Have you tried FLBPD1 - transaction - creating business partner from customer?
    This transaction lives only udner Treasury and Risk Management > BP > Special Functions
    BTW, have you connected in config business partner with customers? Check the settings under cross application components and in Collection Mgt.
    Cheers
    Hein

  • Problem facing during installing of window 7

    Hello sir,
    I have HP laptop modl g6 pavillion... i am trying to install window 7 but the boot option not showing when i insert the disc and restart .... will you please suggest me something so that i will install window 7 on my laptop ....
    This question was solved.
    View Solution.

    Hi Sir,
    Turn off your laptop, as soon as you start your laptop again then continously press 'ESC' - till you will enter the Start-Up Menu, in menu Choose (F9 - Boot Device Options) in there you can choose to boot up from CD/DVD or whatever you want too boot up from I think thats what youre looking for.
    - Hope this helped you, let me know if there is any questions or anything.
    Kind regards,
    Wael
    Best regards,
    Egypteren
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problem faced during liveupgrade

    Hey,
    When I upgraded Solaris 9 to Solaris 10 using flash archive .
    luupgrade -f -n ABE_NAME -s BOOT_MEDIA(Solaris 10 dvd) -j profile.
    Here the profile contains install_type flash_install and the location of the flar.
    But after the activation before the upgraded unit came up I had to enter the defaultrouter,language details similar to fresh install and top of it the network interface changed from ce0 to be0 and the machine cannot be pinged now.
    Right now upgrade is stopped and the back to square one.
    What is that I have done wrong here . Is it normal behaviour to ask configuration details after the upgrade?

    Hi,
    Can you please let me know what you have selected out of 2 options.
    Thanks
    Suresh

  • Problem facing during BAPI call for an inbound interface.

    I have requirement where in i need to make a BAPI call from SRM system using RFC adapter.
    After importing the BAPI(Z_INV_REF_PO) in the Integration Repository the structure looks to be a follws,
    1.Request
    2.Response and
    3.Exception (fault) Message types.
        In my BPM i did a transformation for my source structure with BAPI request. But while doing a BAPI call it throws me Application error as follows,
    RFC adapter is working fine.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">Z_INV_REF_PO.Exception</SAP:ApplicationFaultMessage>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Please help me out on this. Itz very urgent

    Hi,
    As the error is Applcation_error, the data reached the target system but the BAPI call fails. So you mignt not be providing all the mandatory fields to the BAPI.
    Perform a standalone testing of your BAPI, with the data being passed from XI See if the BAPI call is successful..
    Hope this helps you.
    cheers,
    Siva Maranani.

  • Problems during implementation........

    Can anyone please send me some problems faced during implementation at the five stages interacting with the client?Please send me to my mail [email protected]

    The major problem during implementation is gaps in AS-IS Study. If we do not study the peocess to the minute bit, then we tend to miss out critical requirement & this is realized during testing. Then the redo takes a longer time, compared to doing it correct initially. Ofcourse, Things will not be correct in first attempt, but if the number of things to redo is leasser, it becomes more convienent, as during testing phase, we are already overloaded with many activities to be taken care of.
    We should be very clear what is not possible in SAP or even if possible with development, but the particular development is not in scope of project, we require to say a clear NO to it.
    It is difficult to pin point the problems. If I share one of my experience, one of my project was fot service industry & the basic scenarios were periodic billing, mile stone billing & resource related billing & all three I had no prior experience. I had clue of Milestone & Periodic, but no clue of resouce related billing. I had to stuggle hard to get the scenario configured & configuring to the requirement of client. But finally I could do it successfully.
    Regards,
    Rajesh Banka
    Reward suitable points.

  • What is the process of supporting project?

    what is the process of supporting project?

    Hello,
    Please check the following article:
    http://support.microsoft.com/kb/317789
    Microsoft does not provide support for the Crystal Reports products that are included in Visual Studio because Crystal Reports are SAP products. Support is only available from the SAP-provided free forum.
    For more information, visit the following website:
    SAP Community Network Forums
    http://forums.sdn.sap.com/index.jspa?categoryID=1
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Real time issues faced during Sap Implementation.

    Hi All,
    Please let me know some real time issues faced during SAP end to end implementation. Hw did u get over the issues.
    Issues faced during Production Support.
    I have an F2F interview. Please help me out.
    Regards,
    Somya

    Hi,
       This is Srinivas If u dont mine can u help me in Sending me the solutions to me what type of issues we will face in sap/bw implementation like issues and defeacts  can u send to my mail  [email protected]  can u give me solution for error9,error8,return8 can able to plz help me .
    Regards,
    Vasu.

  • I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help

    I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
    [ link removed by moderator ]

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • What is twin sign? what kick off (in implementation project)

    what is twin sign? what kick off (in implementation project)
    regards
    ramana

    Hi,
    Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
    Once it is signed the Project Will KICK OFF means literally starts,
    With the required resources, software and hardware.
    Regards,
    Anji

  • What is twin sing? what kick off in implementation project

    what is twin sing? what kick off in implementation project
    regards
    ramana

    Hi,
    Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
    Once it is signed the Project Will KICK OFF means literally starts,
    With the required resources, software and hardware.
    Regards,
    Anji

  • Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore the Iphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

    Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore theIphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

    See if you can force the phone into recovery mode:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • What does "Problems were found validating your project" indicate?

    I successfully burned (using iDVD3) a 22 minute sequence exported from Final Cut Express 2 as a Quick Time Movie a week ago. Today I exported another sequence, 59 minutes in length, from FCE2 as a Quick Time Movie and when I dragged and dropped it into iDVD3 everything appeared to be fine until I attempted to burn the disc. The following message appeared: "Problems were found validating your project. A DVD must have at least one video track or one slideshow." The movie does "Preview" in iDVD and I can also successfully play it in QuickTime. Any ideas on what is going on??? By the way, I can't even successfully burn the 22 minute sequence I was able to burn a week ago.... I get the same message. Any ideas greatly appreciated.

    Thanks for your reply. I don't know what you mean by "background movie." Also, "placeholder" slideshow is unclear. In any case, I have had success since my post in burning a DVD of one of my Quick Time movie exports from Final Cut Express. I saved the movie file to an external drive and used my laptop that has iDVD6. I did get a similar validation error message but was able to work around it by going to some "map" thingy and dragging and dropping the file into a box that seemed to be prompting me to do exactly that! I have two more movie files to burn, so, perhaps by the time I finish those, the mystery will be demystified...... maybe.
    I'd appreciate any clarification you could give on the "background" movie and the "placeholder" concept. Thanks again!

  • Recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it. Can anybody Tell me what problem i am facing???

    recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it, it is still going on since 3 hours . Can anybody Tell me what problem i am facing???

    Which software did you use to restore it, if you didn't go with iTunes?

Maybe you are looking for