What program will update the current temperature in Mavericks 10.9.1?

We have tried YoWindow3 and Weather.com with no success. So what can we use to display the current weather/temperature on the Desktop? Both of those programs do display the temperature, but they do not automatically update it as they did on our Windows system. If we start at 50 degrees, it will stay 50 degrees all day and night until we open the weather program itself, at which time it will update the temperature to the current temperature one time ... until we again manually refresh it. Is there any weather program that will actually refresh the temperature display on its own?

No, not Dashboard, as that requires bringing up the dashboard. Nor Safari as that means having Safari open to view it. But on the Menu bar at the top of the screen, the programs we have tried display the current temperature on that top bar, but do not upgrade it. We would like to see it when doing whatever without having to open or switch to a specific screen or program. When creating a document or spreadsheet, or when listening to music or viewing pictures, or doing anything else that does not necessarily leave the Dashboard nor Safari open. We are new to Macs, so pardon me if I am using the wrong terminology. In Windows, this would have been called the Title Bar, Menu Bar, or even Toolbar.

Similar Messages

Transaction code/Program to update the Business place/Section

Dear Sir?Madam
We have migrated from 4.6B to ECC6. we are implementing EWT and are testing the tax etnries. while doing miro in some douments the users forgot to update the business place and section field. while doing challan updation it is not allowing to update the challan.
Can you help in suggesting which program or transaction code can be run to update the business place and section so that the challan can be updated and certificate printed.
Regards
Sumita

Dear Sumita,
It seems you are entering the FI document number in the
selection screen of the transaction J1INPP. You need to give
the MIRO document number in the section screen of transaction
J1INPP instead of corresponding FI document number. Once you enter the
MIRO document number in the transaction J1INPP, the program will update
the business place and section code for the corresponding FI document.
Regards
Prashant

Custom Program to update the GL journal DFF each time journals are imported

Hi Guru's,
I have a requirement that I need to build a custom program to update the GL Journal Lines DFF. This program will be executed each time sub-ledger journals are imported to GL.
OPM, AP, AR, Inv & OM will be the Journal sources for those the journal line DFF needs to be updated.
Kindly could anyone give me the best way of doing it.
Thanks & Regards,
Genoo

Hello Geno,
A technical solution is when Journal Import program is launched, the updates of DFF are done after the creation of journals in GL.
So no need to have a custom concurrent program to update the Journals.
You can customize the gl_import_hook_pkg.post_module_hook package to call a custom package and do the updates for journals.
HTH,
Vik

Variant of program is not the current version

Hi
When the program started in CCS, it has been cancelled and giving the "Variant of program is not the current version" . how can i solve this and where ill get the soln for this type of error.
Reply me asap
thanks
Umashankar

you did not give much details about your problem. where you got this error, which program ? what are you trying to do ??
If this is an ABAP Program,you can always create a new variant directly in QA & PRD
SE 38 > Progrma name > Execute (if you have selection screen) > enter your new selections > 'Goto' menu > Save as variant > give new name > Save
If you dont have selection screen in your program
SE 38 > Program Name > Change/ Display > Goto > Variants > Create
Cheers
Praveen

Unable to upload "filescopied_48862.txt" to update the current view of the

Hi Team,
While applying applications patch I am getting the below error in the patch log file.
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
But when I checked in the ad_bugs table it is showing the bug_number.Actually this patch has to change the version of file fadp6.lpc,but it is not changing it.
We already have updated current view snapshot.
Please suggest me on this.
Thanks,
Suresh

Hi Hussein,
Thanks for quick reply and the details are:
Q)Please post the application release, database version and OS.
ApplicationRelease:R12.1.1
Database Version:11.1.0.7
OS:Windows Server 2008(32 bit)
Q).What is the patch number?
12338963
Q).Is this the complete error message?
In the whole patch log file this is the only error it is showing.
Q).Did the patch continue to run after this error and completed successfully?
Yes It has continued to run after this error and completed successfully.
Q).Please apply the patch again from the beginning and see if you encounter the same issue.
I have applied the patch again from the beginning and we are getting the same error.
The only error in patch log file it is showing is:
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
Q).What is the version of fadp6.lpc you already have? What is the version of fadp6.lpc delivered by this patch? Have you verified the timestamp of the file?
fadp6.lpc 120.36.12010000.7 and the timestamp is:2009/07/28 07:55:40
Version of fadp6.lpc delivered by this patch is:120.36.12010000.13
Thanks,
Suresh

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

Why doesn't the weather icon display the current temperature in your "local" city?

Why doesn't the current temperature display in the weather icon on the home screen?

The application works and I do have location-based services on. I'm just wondering why the icon itself does not show the current temperature. Sort of how they upgraded the clock after show the current time.

Standard report Programs to find the current status of workflows

Hi Experts,
Are there any Standard report Programs to find the current status of workflows or workflows which are pending.
Regards,
Hari

Go to SWI1 t-code
Give the appropriate Status - Ready or Inprocess or Waiting
Input the Task - either WF Template or Standard Task.
Choose the time period and execute the report.
Regards,
PR.

In which table we will update the cost that is calculated thru ck40n

hi
does anyone know where we will update the price or cost calculated when we perform the costing in ck40n....for standard cost

it will updates Material masters ?
Regards
Peram

Updating the current row in vo which is bind to af:table.

Dear all.
I have created af table by dragging datacontrol on page.. i also have a form and onclick of button i want to update the current selected row in table..
I am getting the current row properly but when i am trying to update the row.. it gives me following exception.
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Failed to lock the record, another user holds the lock.
oracle.jbo.AlreadyLockedException: JBO-26030: Failed to lock the record, another user holds the lock.
Following is my update code.
public void update(){
//BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Create").execute();
BindingContext bc = BindingContext.getCurrent();
JUApplication japp =
(JUApplication)bc.getCurrentBindingsEntry().get("Entries_AMDataControl");
Entries_AMImpl ampl = (Entries_AMImpl)japp.getApplicationModule();
ViewObjectImpl vo=ampl.getEntries_VO1();
Entries_VORowImpl row=(Entries_VORowImpl)vo.getCurrentRow();
row.setSubject(subject);
ClobDomain c=new ClobDomain(toXML().toString());
row.setXmlcontent(c);
row.setDescription("");
//vo.setCurrentRow(row);
//vo.executeQuery();
//BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Execute").execute();
BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit").execute();
So please can anyone there tell me how can solve this problem.
Thanks,
Regards
jdev version 11.1.1.4.0

Hi Frank
in your AM configuration, set the locking behavior to optimisticIts already optimistic.
is bad coding practice. You should perform updates through teh ADF binding layer and not directlxy against the Application Module Impl class. You can get the >current row from the iterator the table is bound to and set the attributes on itI changed my code to following
RowKeySet rs = getCalcTable().getSelectedRowKeys();
Iterator it = rs.iterator();
DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter =
bindings.findIteratorBinding("Entries_VO1Iterator");
StringBuilder sb = new StringBuilder();
RowSetIterator empRSIter = empIter.getRowSetIterator();
Row currentRow = null;
while (it.hasNext()) {
Key key = (Key)((List)it.next()).get(0);
currentRow = empRSIter.getRow(key);
break;
Entries_VORowImpl row=(Entries_VORowImpl)currentRow;
row.setSubject(subject);
ClobDomain c=new ClobDomain(toXML().toString());
row.setXmlcontent(c);
row.setDescription("");
BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit").execute();
But it still gives me same error.
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Failed to lock the record, another user holds the lock.
oracle.jbo.AlreadyLockedException: JBO-26030: Failed to lock the record, another user holds the lock.
Any suggestion appreciated..
Thanks
Regards.

How can I update the current java for Mac Pro 10.6.8

I tried to update the current java on my computer, but after i down load, the application failed to installed.

Spinning Beach Ball
Spinning Beach ball (2)
Spinning Beach ball (3)
Spinning Beach ball (4)

Will updating the ipod touch with the latest version delete everything?

Well, my ipod hasn't been updated in a while, mostly because I have a ton of podcasts that I don't want to get rid of. Now I know that itunes doesn't really like podcasts coming from the touch itself. So I can't upload my podcasts to my computer, so I was wondering if that updating my ipod from 2.2.1 to the current version would erase all of those. I don't really care about anything else because I have those backed up, but I can't get those podcasts back.
If I can't update it it's fine, I can still put music on it and stuff, but it is kind of annoying not being able to watch any youtube videos or look at podcasts anymore.
Message was edited by: OFQ

The first part of update is making a backup. However, a backup does not include items like podcast, music since they are synced to the iPod. Therefore, unless the podcast are on the computer they will be lost when updating.
Are you also saying that when you click on transfer purchases, the podcast you purchased on the iPod itself do not copy/transfer to the computer? If not, the following discussion tell how to move stuff off your iPod to a computer:
http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

How do i update the current time to the database ?

Hi guys...
How do i connect the "Date/Time string" to the DB Tools Update Data.vi ??? Is it connect it to the point/pin called "condition" of DB Tools Update Data.vi ?
I am kind of confuse of how do i connect...
Thanks in Advance.
Attachments:
Att taking.png ‏102 KB

This is the error i get...{ NI_Database_API.lvlib:Cmd Execute.vi->NI_Database_API.lvlibB Tools Update Data.vi->FYP_3.1.vi<ERR>ADO Error: 0x80040E14
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement. in NI_Database_API.lvlib:Rec Create - Command.vi->NI_Database_API.lvlib:Cmd Execute.vi->NI_Database_API.lvlibB Tools Update Data.vi->FYP_3.1.vi }
When u scans a card, it will show you your information with the Current Time/Date on the table. and update it on the database....
I try the example of DB tools update data vi .. it make me more confuse :l

Calling a forms program outside of the current form directory

My application consists of a menu that calls forms programs in 3 different directories. The three forms directories connect to 3 separate databases. The forms menu resides in forms directory1. The 3 sets of forms programs are for the most part identical with some minor changes. The 3 databases are also pretty identical with some minor changes. NOTE! I'm a newbie who did not design this but who is charged with maintaining it without having the benefit of any formal Oracle training ... So please keep that in mind. I've read the manuals and tried as many things as I can think of including setting the FORMS60_PATH prior to issuing the 'HOST' command as well as providing a fully qualified pathname when using the CALL_FORM command.
When the menu calls a program in forms directories 2 or 3 using the 'HOST' command, the first screen is fine. When that first screen calls another forms program within it's directory (2 or 3) control is passed to the forms program in forms directory 1 (where the menu lives).
I've been told that it can't be done and also that it can be done but that it's a real science project. One alternative is to use individual ICONS that run 3 different menues, one in each forms directory. That will work, but it's not what we're after here.
Any help would be appreciated even if it's just suggested reading. We're running Oracle 9i and Forms v6.
Thanks,
Ron

Hi Ron,
I would like to know few things before i give u a solution.
Have u configured the 3 directories to the FORMS60_PATH?
Do u have the same form names in all the 3 directories or the form names are different?
As u have mentioned u connect to different user's of the single database for the forms in different. this can be achived.
Regards
Natesh

Varient of the program is not the current version

Hi
when User try to run SE16 - they are receiving messages similar to the one below, when they attempt to select a saved variant.
Variant VOUCHER LIST of program /1BCDWB/DBBKPF is not the current version
Message no. DB 634
Diagnosis
You attempted to start report /1BCDWB/DBBKPF using variant VOUCHER LIST. Since thisvariant was generated, the report SELECT-OPTIONS or PARAMETERs havechanged considerably, i.e. the type or length no longer match andPARAMETERs have become SELECT-OPTIONS or vice versa. Many of thesechanges are so serious that even attempting to import the variantresults in runtime errors.
Procedure
Adjust or delete the variant.
Users are seeing a similar error when they try any table (BKFP is the one above, but have seen on table VBAK, VBAP, etc.).
Pls suggest the solution of this problem.
Regards
Amar

This would happen when the selection screen of the table got change. Like when users had saved the variant, there were 5 fields on the selection screen but eventually it got changed to more or less fields.
The only way, I can think of is to recreate all the variants.
To get rid of this problem, you can use transaction SE16N instead of the SE16.
Here You can save the variant by pressing the SAVE button.
To get the variant: Enter Table name, Go to > Variants > Get. Select your variant.
Regards,
Naimesh Patel
Edited by: Naimesh Patel on Mar 24, 2009 9:23 AM - Added SE16N

What program will update the current temperature in Mavericks 10.9.1?

Similar Messages

Maybe you are looking for