What Ram do I need for my iMac?
Hello
I have an iMac 21.5-inch, Mid 2011, and I want to add more ram, and I think I have found the right type here:http://www.amazon.co.uk/Crucial-200-pin-SODIMM-PC2-5300-memory/dp/B000F7QRTG/ref =sr_1_1?ie=UTF8&qid=1420986001&sr=8-1&keywords=iMac+Ram+2gb.
Is this the right kind of ram, compatible with my iMac? I only really need 2GB and don't really want to spend more money as it is quite expensive.
Another part of my question is the installation. Is it at all risky installing Ram? Is there a service Apple provide to install it? And where is the best place to find out how to install it?
Thank you.
Specs
iMac
21.5-inch, Mid 2011
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 512 MB
Software OS X 10.9.5
You need:
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Similar Messages
-
What RAM should i get for my iMac?
I'm well overdue new RAM in my iMac as i run Pro tools and Logic with 1GB of RAM and its now come to the point i can hardley do anything with out ''system overload''! however i'm not sure what one i need? does it matter which make it is ? This is my specs below thanks for any help.
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 800 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503131325336344352362D53362020
Serial Number: 0x00003017
BANK 1/DIMM1:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
Mac OS X version 10.5.8
Processor 2.4GHz Intel Core 2 Duo
Memory 1GB 800 MHz DDR2 SDRAM
Startup Disk Macintosh HD
Cheers!The important thing to do is make sure you get ram from a reliable, Mac-friendly source as Macs are very sensitive to their ram. Two good sources are Crucial and OWC, http://www.macsales.com both will tell you just what ram you machine will take and guarantee compatibility and give a lifetime warranty. And they have on-line videos on how to install.
-
What RAM do I need for my macbook?
I have been told that it may only support up to a max of 2gig, but have also read that a lot of people have put in 4gig and its work fine.
And is it just any DDR2 SDRAM that I can buy? (im not too clued up on ram types)
So this is what I have....
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version: 1.13f3
Sudden Motion Sensor:
State: Enabled
BANK 0/DIMM0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
BANK 1/DIMM0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
ThanksYou need PC5300 DDR2 667MHz So-Dimm modules for your MacBook. If you want to maximize your RAM, you can put in a 4GB Kit (2 x 2GB) and you will be utilizing approximately 3.3 GB of the RAM. Needless to say, even if you get a 2GB Kit (2 x 1GB) you'll be doubling the amount that you have now which will be a substantial increase. [HERE'S|http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=262&type=Me mory&TI=0645&shoupgrds=Show+Upgrades] a link to a reputible place to shop and buy. -GDF
-
What ram do I need for my mid 2012 '13 MacBook Air
Is it user replaceable?
It's not replaceable or upgradable by either customers or Apple. The only opportunity to increase its RAM is when configuring a model in the online Apple Store prior to buying it.
(103611) -
How much RAM should I install for new iMAC ?
Hi,
How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
*(The 21.5" 3.06GHz Intel Core 2 Duo)
Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
Does that sound reasonable?
Any other recommendations?
Thanks,
Wm HeartUnless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
HTH
Regards, Erik. -
Hello friends, what printer do you recommend for the iMac OS X Mt Lion?
Hello friends, what printer would you recommend for the iMac OS X Mt Lion?
There are hundreds that will work, you need to determine what your needs are and then go shopping. For a list of compatible printers and all-in-one's please look over Apple's advice letter:
http://support.apple.com/kb/HT3669 -
What technical components are needed for integration of SAP BI and BO?
Hello,
What technical components are needed for integration of SAP BI and BO?Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos -
What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2
What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????
Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
If driver+software then that's a problem as they likely won't write one for OS X.
If drivers you can install these open source one and hopefully it might work, Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
http://sourceforge.net/projects/gimp-print/files/ -
What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?
All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately. -
What adapter do i need for my macbook pro for a presentation
what adapter do i need for my macbook pro for a presentation
What model/Year MBP do you have and what are you connecting it to?
Ciao. -
What cables do I need for Apple TV streaming from my iPad to my tv
What cables do I need for Apple TV, streaming fom my iPad to a HD tv?
if you have an Apple TV it's don over wifi as in wireless so no cable would be required apart from the hdmi cable the Apple TV connects to the tv with
-
What charger do I need for my 2008 macbook pro 15"
what charger do I need for my 2008 macbook pro 15"?
This one:
http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
Ciao. -
What app do i need for my phone printer officejet pro 8500a
what app do i need for my phone printer officejet pro 8500a
Hi tiys,
If you have a Android phone you can download HP home and biz app from the andriod market.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
What app do i need for my epson 600 printer to work with my ipad
what app do i need for my epson 600 printer to work with my ipad
Hi,
You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ?
http://support.apple.com/kb/ht4356
If Yes, please follow this checklist and fix:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If No, check with Epson
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
What ram do i get for my MacBook 3,1?
what ram do i get for my MacBook 3,1?
Welcome to the Apple Support Communities
You have a Late 2007 MacBook, that uses 667 MHz DDR2 RAM. Officially, it supports 4 GB of memory, but you can install 6 GB of memory. See > http://support.apple.com/kb/ht1651#link3
If you want more memory, you can buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) > http://eshop.macsales.com/shop/memory/MacBook/DDR2/
Maybe you are looking for
-
Error while calling an RFC from R/3 to XI
Hello, I am calling an RFC to send data from R/3 to XI which uses an RFC destination of TCP/IP type. I am getting the following error: "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException". Kindly provide some inputs. -kshitij
-
As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?
-
Appending new pages to signed documents now makes Acrobat 9 and Reader 9 mark signature as invalid
Hello! I have developed a service that appends additional pages to existing PDF documents. Some of the documents the service works on happen to be signed. As the service appends the pages using incremental updates, the signed contents are left untouc
-
Import Server - Workflow related value exceptions
Hi, Our Import Server is importing multiple records, one record per file. The inbound port is configured with a file threshold of 5, 50000 chunks and 5 parallel chunks. We are using a workflow on import to assign values to 2 different fields. In the
-
2 GB Limit – Please explain the concept
I have more than 35000 photos already uploaded into Revel. In order to continue to remain a Free member, shall I have to delete all my photos and keep only within 2 GB limit? Please explain the new concept... Thanks!