What report is run in SAP to get the DATE on which Users are locked ?

Hello,
What report is run in SAP to get the DATE on which Users are locked ?
I have tried with RSUSR200 ,-- last logon ,last password change , but i did not get a option to find the date on which are Users are locked .
Can anyone suggest what report should be executed to get the date on which Users are locked and by whom ?
As a alternate , i am usig SUIM to get extract this data but i am looking for a report .
thanks & regards
Ganesh

Hi Ganesh,
You can try the below link where many of the options are described:
How i can check at what date perticular user was locked and who lock it?
Regards,
Nilanjan

Similar Messages

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

How do I get the date to display on ipad lock screen?

How do I get the date to display on ipad lock screen?

The day and date should display on the lock screen, e.g., "Wednesday, March 19"
What are you seeing?

Is it possible to get the URL from which user came to Apex Application?

Hi,
I have 1 web site which is created by Apex. And I have to create similar sites with slight differences. For example, even though the contents are almost same, each telephone # have to be modified.
So, if possible, I want to use only 1 web site and depending on the URL from which user came, change some information on the page. Is it possible?
And if it is possible, what if the user set Apex URL as favorite and visit it after some days?

Thank you Scott,
This is the one.
But I have another issue.
If a user comes to our page from their link directly, I can identify where he come from. But if he added our site to Bookmark and comes to our site through the link, is it possible to identify his original route?
If it is impossible, I will create other Apex Application and put each URL to the link in order to catch where the user is from.

How to get the date on which a material has gone into stock

Dear All,
Suppose that I have some 20 unrestricted stock for a material. I want to know on which date the same has gone into stock ..Maybe 15 might have gone before 2 weeks and 5 might have gone a couple of days ago.
How can we get the details for the same .
Thanking you in advance,
Shankar

Although you can look at the materia documents created for this material in recent past but that is not a way to track this kind of information. Batch management can be used for enabling tracking of this kind of information. Take for example following situation -
    1st January 100 PC IN
    10th January 50 PC IN
    1st Feburary 75 PC OUT
    2nd Feburary 25 PC OUT
You get only this kind of information from material documents but with this information it is not possible to know what you are looking for. If this is the requirement then Batch Management should be enabled.
Cheers,
Sanjeev

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
If space is an issue... use an external disk.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

After running permissions repair i get the folling msg. Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

after running permission repair i get the following msg. anyone know how to fix this?
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner
a little more info
Before the user had read & write. A member of the group had read.
After, only the user had read & write.

Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself. Once in awhile i get an error message about unknown error 1. If i look at the diagnosis or if runs on itunes i get the following i

Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself. Once in awhile i get an error message about unknown error 1. If i look at the diagnosis or if runs on itunes i get the following. When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer. It did get progressively worse though, at first it crashed not that often and then got worse. So restores are failing, recovery, everything. Anyone run into this?
11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c bug type 110
incident identifier 8ff84a87

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed.

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed but it still kept getting stuck on the apple loading screen.

You have limited opportunity to attempt to create a backup of your created files.
That is what the SafeBoot or safemode appears to allow you -- at the moment.
Since the hard disk drive exhibits signs of failure or other major issues, plan
on a replacement in the near future. You may be able to get the computer to
start up in a regular full OS X (not safe mode) but consider its hours are limited.
An externally enclosed hard disk drive (with own power supply, not relying on
Mac ports to run it) is a good basic means of which to use a disk utility to make
a copy or a Clone of the current OS X. This may help retrieve an archive that
could be used along with a Time Machine backup, to restore your Mac once you
get a new hard drive installed inside.
Good luck & happy computing!

Define a join in Webi Report which gets the data from two Excel files

Hello,
I have the following excel records as a source for my Webi Report:
Excel 1
Excel 2
Date
Month
Month
Year
Year
Total Number of Days
in Month
No. Of Exec
Functional
Area
Now I need to show No. of executions/Total Number of Days in Month per functional area (Where Month of Excel 1 is Month of Excel 2).
For this:
I have Merged, Month of Excel 1 and Month of Excel 2, Year of Excel 1 and Year of Excel 2.
Created a variable vNoofExec , No. of Exec/Total Number of Days in Month.
Created a graph, with Merged Month, Merged Year, vNoofExec with Region Color on 'Functional Area'.
But, it doesn't work.
If I replace vNoofExec with No. Of Exec I get the data, but not with vNoofExec.
Any Idea how we can get a solution for this?
Best regards,
Praveen.

Hi Amit,
Thank you for your reply.
I tried putting them in a table to see if I am getting the value for vNoofExec but, no, I am not getting. Here is the dummy data for both the excels:
1. Excel 1:
Year
Month
Week
Date
No. Of Exec
Functional Area
2013
1
30
26
1
FA1
2013
2
21
20
12
FA2
2013
3
21
21
1
FA3
2013
4
21
22
5
FA4
2013
5
21
23
2
FA5
2. Excel 2:
Year
Month
TotalDays
2013
1
31
2013
2
28
2013
3
31
2013
4
30
2013
5
31
What I found is, if I create a measure like, [No. of Exec] where ([Functional Area]="FA1") and use this measure in the graph I am able to see the data even if I use Total Days in the Graph, but, I cannot create multiple measures like this because for me number of Functional Areas will be changing always.

Where can we get the data for pre calculated reports

Hi,
i want to see the data for pre calculated reports (Reporting agent)
where can we get the data for pre calculated reports
Thanks & Regards,
Shaliny. M

Dear,
This feature of precalculating reports is to enhance the report performance. You will need to schedule this periodically, so that the report is fetched and cached. This allows faster retrieval of report data. Plz. understand that, this scheduling needs to run after every data load in the corresponding cube, so that, the latest data is cached, else the report data will be obsolete.
Thanks

What I want to do is to get the co-ordinates of the elements of the third array which shows differences between 2 other arrays

Hello,
Ive have got a vi that compares two arrays by element and gives back the location of the elements that are not equal in a third array. What I want to do is to get the co-ordinates of the elements of the third array from the either the first or second array.
Many Thanks
(Labview 7.1)
Please find the vi attached below
Attachments:
ArrayDiff701.vi ‏25 KB

jihn wrote:
What I want to do is to get the co-ordinates of the elements of the third array from the either the first or second array.
Sorry, I don't understand what you mean. What are coordinates in this context?
If you for example want to get an array of all elements from the first array corresponding to the list of indices in the "locations" array, just add another FOR loop as shown.
Your VI has a major flaw! You need to reverse the order of "Add array elements" and "to I32". The "to I32" needs to come first! (see image). If you "add" first, you'll run into problems if you have more that 32k different elements because of overflow in the I16 integer.
Message Edited by altenbach on 02-21-2008 05:22 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Different.png ‏9 KB

RE:RRI Checks how to get the data my reports.

Hi,
I have two reports overview&Detail reports.When i execute overview report i am getting the data.in the same report i am integrated the detail report.when i am trying to open detail report in overview report i am not getting the data it shown the error No Data Available. But data is there in Detail report when i execute individually.
i Did the RRI Checks also,
Pls help me how to get the data in detail reports and also give me the steps which i have follow.
Regards
Som

HI All
Let me rephrase my Question
I have an overview report and a detailed Report Both of them are working fine individually. But when i link them using RSBBS the detailed report is not giving any data. it gives "no Data available". There is no assignment details maintained. it is having the default value. (generic and *)
please let me know what might i be missing
Regards
D

Inserting Address in SAP and getting the ADRN Number

Hi all,
I am new to Address Management in SAP.
There are lot of FM's in Function Group SZA0 ... to handle the adddress
I want to insert an address coming from a legacy system... into SAP Address tables and retun the Address Number..
What are the function modules i need to use and in what sequence for inserting an address and getting the address number.
Thanks in Advance,
Regards,
Sushil.

Hi
There are severals BAPI in order to insert an address, which BAPI has to be used depends on the kind of address u need to create, these are the BAPIs:
BAPI_ADDRESSORG_SAVEREPLICA
BAPI_ADDRESSPERS_SAVEREPLICA
BAPI_ADDRCONTPART_SAVEREPLICA
Max

Phone I purchAsed was reported stolen I was able to get the owner to give me the info to enter the phone it's constantly blocking my SIM card

Phone I purchAsed was reported stolen I was able to get the owner to give me the info to enter the phone it's constantly blocking my SIM card

There are several actions that the owner needs to do
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Report a lost or stolen Apple product - Apple Support

What report is run in SAP to get the DATE on which Users are locked ?

Similar Messages

Maybe you are looking for