What's "CX_SY_MESSAGE_ILLEGAL _TEXT"

hi all,
i'm trying to do one screen exit in my development client by assinging one enhancement implementation in t-code se38.When i select the EI to continue...its going dump and saying that
class "CX_SY_MESSAGE_ILLEGAL _TEXT" was not caught in and procedure "action" "(form)".....
what 's this error....i went to se37 and put a break point in the Perfom Action code...but its not working out in debugging mode also.(going dump).
But the same process,i did it in IDES and its working well....no errors.
WHat's this error and how to resolve it.
Pls post ur comments
thanks & regards
sankar.

Hi ,
Could you please verify that you have defined an exception as TYPE in EXCEPTIONS section/tab of your FM?
Thanks and Regards,
Sooness.

Similar Messages

CX_SY_MESSAGE_ILLEGAL _TEXT

Hi all,
Im an Abapper and im getting the below message in my report(se38)RUNTIME ERROR....my technical guys says it should be resolved by Basis Consultant....
CX_SY_MESSAGE_ILLEGAL _TEXT
Run time Error.
The Exception 'CX_SY_MESSAGE_ILLEGAL _TEXT ' was raised but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situation and this error was not adequately responded to, the running ABAP program 'CL_MESSAGE_HELPER========CP' HAS TO BE TERMINATED.
Error Analysis.
AN exception occured that is expalined in detail below.
The exception which is assigned to class ''CX_SY_MESSAGE_ILLEGAL _TEXT ' was not caught in procedure "ACTION" (FORM)", nor was it propogated by raising clause.Since the caller of the procedure could not have anticipated that the exception would occur,the curent program is terminated.
The reason for the exception is:
the text parameter in MESSAGE cannot be an initial reference.
Trigger location of exception
Program:'CL_MESSAGE_HELPER========CP'
include:''CL_MESSAGE_HELPER========CM003
Row 3
Method type: method
Module name:SET_MSG_VARS_FOR_IF_T100_MSG.
SOURCODE:
IF TEXT IS INITIAL.
>>>>>>>>>RAISE EXCEPTION TYPE..
Hope it;s enought for ur reference...
What's this and how to resolve it???
Pls post ur comments and do the needful at the earliest.
thanks & regards
sankar.
Message was edited by: sankar
sankar babu

Hello Sankar,
What basis release you are using? Check SAP Note 1098603 talks about the same errors when you create implicit enhancement.
here is the link for the above SAP Note:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_dwb/~form/handler">SAP Note 1098603</a>
Hope this helps
Regards,
Satyajit

Run time error in "'CX_SY_MESSAGE_ILLEGAL _TEXT "

Hi all,
the below is the detail message of my run time error occuring when creating one new enhancement implementation thru se38 for "LFDCBFI0".
Pls help me by posting ur comments,how to resolve it.
Run time Error.
The Exception 'CX_SY_MESSAGE_ILLEGAL _TEXT ' was raised but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situation and this error was not adequately responded to, the running ABAP program 'CL_MESSAGE_HELPER========CP' HAS TO BE TERMINATED.
Error Analysis.
AN exception occured that is expalined in detail below.
The exception which is assigned to class ''CX_SY_MESSAGE_ILLEGAL _TEXT ' was not caught in procedure "ACTION" (FORM)", nor was it propogated by raising clause.Since the caller of the procedure could not have anticipated that the exception would occur,the curent program is terminated.
The reason for the exception is:
the text parameter in MESSAGE cannot be an initial reference.
Trigger location of exception
Program:'CL_MESSAGE_HELPER========CP'
include:''CL_MESSAGE_HELPER========CM003
Row 3
Method type: method
Module name:SET_MSG_VARS_FOR_IF_T100_MSG.
SOURCODE:
IF TEXT IS INITIAL.
>>>>>>>>>RAISE EXCEPTION TYPE..
Hope it;s enought for ur reference...
Pls post ur comments
regards
sankar.
Message was edited by: Sankar
sankar babu

hi Amandeep,
Sorry for the delayed reply....im on off for today and tomorrow to my office...so u pls...post me the detail...how to check all this and do the work,hope dont mind me asking u now.
thanks & regards
sankar.

What is the relation between KTOPL and 0CHRT_ACCTS_ATTR? both Chart of Acct

Hi
If an R3 field e.g. KTOPL (in datasource 0fi_gl_4) which is a "Chart of Accout" is extracted a part of 0fi_gl_4 to BI,
is there the need to separately extract 0CHRT_ACCTS_ATTR & 0CHRT_ACCTS_TEXT which are also "Chart of Accout"
What is the relation between KTOPL and 0CHRT_ACCTS_ATTR & 0CHRT_ACCTS_TEXT in R3?
What is the relation between KTOPL and 0CHRT_ACCTS_ATTR & 0CHRT_ACCTS_TEXT in BI?
Thx

Hi,
I get these well with examples so let me see if I get your point:
So in the tranx data the 0fg_gl will be a value for KTOPL e.g. 450009 as a G/L Account number? (Values for chart of Acct should be GL Accounts, right?)
but before this tranx data is loaded, preferrably, 0CHRT_ACCTS_ATTR and 0CHRT_ACCTS_TEXT should have been extracted to BI; and data loaded; and this will be the master data and there should have been in it:
.._ATTR -
.._TEXT
450009 -
Petty cash Expenses
Is my understanding exact?
Thnx

At a glance what is new in Safari 5

This should give a little in sight:
http://lifehacker.com/5557731/first-look-at-whats-new-in-safari-5

I missed the 'Blue Bar', I'm glad it has returned

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

Macbook4,1 10.6.8 and firmware update - what went wrong?

Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
I clicked OK and it installed.
Upon reboot, it seemed to install okay.
But then I left the Macbook and it went into Sleep.
I didn't come back to it again until the next day.
When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
And this is where the problems started.
After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
It finishes booting, but seems to go into Sleep.
I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
I've tried changing RAM, but problems remain.
So what's all this? Any ideas?
The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

Thanks for the reply.
Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
Which capacitor?
No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
1) it came thru Software Update
2) there was no warning
3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

Format C drive, what steps to take for retaining all data of iTunes?

Hello
I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
Thanks in advance

This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following. I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library. You now have a "split library" where:
E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
C:\Users\your user name\Music\iTunes contains the following folders and files:
Album Artwork (folder)
Previous iTunes Library (folder)
iTunes Library Extras.itdb (file)
iTunes Library Genius.itdb (file)
iTunes Library.itl (file)
iTunes Library.xml (file)
I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
Before you change anything else, exit iTunes. Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder. You should now have this:
or something very similar. Now restart iTunes while holding down the SHIFT key. You will see this dialog:
Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above. Select the iTunes Library.itl file and click OK. iTunes will load - check that everything you expect to see is there.
You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them. You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations). As tt2 suggested in his response, before you go any further:
Make a backup of your new portable library to another device.
De-authorize your iTunes account.
Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.). Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
Once you've reformatted the drive and reinstalled Windows, install iTunes. As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

Black window bugs and lockups and crashes and WHAT'S WRONG?

First, I thought the problem was that my employer still uses Windows XP, with layers of custom security on top. But it happens at home, on my vanilla XP netbook.
So then I thought the problem was XP, which is, after all, obsolete. But now it is happening on my brand-new week-old laptop running 64 bit Windows 7 professional.
These are the problems:
(1) When recovering from sleep mode, or when I plug in a second screen, or even just from having the screen closed briefly, Firefox fails to redraw its window contents. I just get a black, empty window until I resize it or force a refresh. NO OTHER PROGRAM I USE HAS THIS PROBLEM.
(2) Sometime Firefox fails to redraw no matter what I do. I just had a totally black window, and when I clicked on the close box, a msgbox popped up, totally black inside, with a title like, "Are you sure you want to close?" I couldn't even see the "yes" and "No" buttons, and clicking where they usually are didn't work. I finally got it to close by hitting the enter key.
(3) Sometimes these problems are accompanied by a little vestigial micro-window, which has no contents, no close button, and no resize control. It's this nothing window with no title, but the title bar is long enough for maybe 20 characters. The most recent time this happened to me, the nothing window had a blinking text cursor inside, but typing had no effect. The only way to get rid of the micro-window is to close every single instance of Firefox, and then wait about 20 seconds. Then it disappears on its own. Sometimes it appears on its own without the black screen problem.
(4) All my favicons disappeared when I updated Firefox on my XP work computer, and they refuse to come back, even when I revisit the websites.
The computers involved are:
Dell E4200 running Win XP Pro
Acer One netbook running Win XP Home
Vostro 3350 running Win 7 Pro
All 3 computers are running Norton Security Suite (The E4200 is running an Enterprise custom load, the other two are running Comcast's free version)
And all 3 computers have been connected to a Displaylink USB video adapter (for a 3rd screen) at some point or another, meaning that the driver is loaded on all the computers, but the above problems occur without any external monitor at all connected.
Everything else is pretty vanilla.
I'm getting these issues every other day or so, and it is really starting to annoy me and make me worried that Firefox is unstable, with makes me worried that any unsaved work or even my hard drive data might be at risk.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email. What is happening?

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail.

When would I use an if, for or while statement in Small Basic and what is the difference between the three?

I have a Y9 Computer Science Exam next week and I know that this will probably be one of the questions on it so I need to know the answer. What is the difference?

An If statement executes once IF the statement is true:
If 1 = 2/2 Then
Textwindow.writeline("True")
EndIf
A While statement executes WHILE the statement is true:
While 4 = 2+2
'Will keep looping while it is true
EndWhile
A For statement loops a number in increment:
For i = 1 to 10
'Every time through, i gets bigger by one until it equals 10
EndFor
It is written: "'As surely as I live,' says the Lord, 'every knee will bow before me; every tongue will acknowledge God.'" Romans 14:11

What is" LINE-COL2 = SY-INDEX ** 2."

can u explain what is '' ** "
FIELD-SYMBOLS <FS> LIKE LINE OF ITAB.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2. "what this will do
APPEND LINE TO ITAB.
ENDDO.

Hi sunil,
1 ** means "To the power of"
2. eg. 5 ** 2 = 25
(5 To the power of 2 = 25)
regards,
amit m.

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

What's "CX_SY_MESSAGE_ILLEGAL _TEXT"

Similar Messages

Maybe you are looking for