What's the best set up with AppleTV and Mac Mini with 2TB external HD?

Hi
I have an Apple TV and 2TB external HD connected to my Mac Mini.
I want to stream through my Mac Mini and I want all my media stored in my external HD.
What's the best setting so that I sync only one way to my external HD the contents of my Apple TV? I don't want anything except unwatched media on my Apple TV.
I'm fairly new to Mac world and Apple TV, as far as I read iTunes and Apple TV sync both ways,how do I achieve a one way sync to my Mac Mini with external HD?
Many thanks

ali akidil wrote:
Ok that makes it clear, sorry I used wrong terminology,it should have been transfer rather than sync.
You don't want to stop transfers of purchased content. See This User Tip
While on the subject a friend of mine told me that the streaming videos doesn't work well,it kinda freezes and stops but the music stream is fine. Is that true or his set up is wrong?
It's not necessarily his configuration set up that's wrong, it's probably that he has a poor network by virtue of too great a distance or interference from other networks or other household equipment.

Similar Messages

What is the best way/quality of connecting my Mac Mini to an external HiFi system?

Hello,
I am using my Mac Mini for storing and playing music using iTunes.
In terms of audio quality, what would be the best option for connecting the Mac Mini to my external HiFi system?
1) Using an optical cable?
2) Using a analog cable?
3) Using a USB connected DAC? (maybe the best option but surely the most expensive)
If the option 3 is only the good one, would suggest a DAC product?
Thx for your help
Best Regards,
-- Jean-Baptiste

The optical output is capable of doing 5.1 surround sound (as well as 2.1 or basic stereo) and is therefore more than capable of fully supporting lossless audio formats like AIFF, WAV, FLAC, Apple Lossless as well as all DVD audio formats. The optical (TOS-Link) interface is not capable of fully supporting the higher end audio standards supported by Blu-Ray discs.
For full Blu-Ray support you would have to use a HDMI interface.
So with regards to purely CD sourced material and even potentially DVD-A (DVD Audio discs), and SACD (Super Audio CD) it should be fine.
Some anally retentive audio fanatics will say that potentially some of the signal can be lost over a TOS-Link optical connection and they would insist on having an audio interface to act as a dedicated DAC (Digital Audio Convertor) with direct links to the speakers. I would say ordinary humans will be more than happy with a lossless audio format being sent over an optical link which will definately be superior to AAC over a copper wired link.

What is the best soft wear update for a mac desktop with   System Version:     Mac OS X 10.5.8

What is the best soft wear update for a mac desktop with   System Version:
Mac OS X 10.5.8

It will depend on the actual model you have.
Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99 while Mavericks is free. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.

What is the best way to hook up my mac mini to my LED flatscreen

I have a Samsung LED flatscrren - what is the best way to hook up a mac mini to it

HDMI cable. Works great no problems so far.

External usb microphone not working with FaceTime and mac mini with os x Yosemite

Hello
When I try to do a phone call with face time through my iphone 6 face time is not recognizing my external usb microphone connected to my mac mini. I have just updated my mac mini to os x Yosemite. If I go to the audio system preferences and look to the audio input signal I can see that the external microphone (SB Omni Surround 5.1) is working (audio input level is showing an input signal).
Can someone help. I saw that this was also an issue in the beta versions of Yosemite.
Thanks.
BR Stefan

Interesting. I don't have a USB mic on the Mac Pro. Its the OLD FireWire 300 iSight. It works for FaceTime calls but not the iPhone call via the FaceTime app.
I also have 2010 MBP that works perfectly, even since the first Public Beta. I'm to sure if that mic is considered an external USB device or not, or if it has to do with device signatures vs. external or internal. I would almost assume that the built-in mic is on the USB bus. How would it be any different than the external USB.
I think I have to agree that this is a point release bug. I have submitted a bug report at bugreport.apple.com, and would ask others to do the same, or at least post to apple.com/feedback. The more noise we make through process the more likely to get a fix in the .1 release.

What is the best connection method for early 2009 mac mini to 27" Monoprice monitor

I just ordered the new monoprice 27" LCD display. It has displayport 1.2 and hdmi inputs as well as Dula Link DVI. It also has two onboard speakerd with a small amp. So before i plunk down $99 for a dual ink converter cable...how shuld i connect his monitor? And can i get audio to it as well for the speakers?
Here is the link:
http://www.monoprice.com/products/product.asp?c_id=113&cp_id=11307&cs_id=1130703 &p_id=10489&seq=1&format=2

I would love this to be true, but Monoprice is saying i need to go with the Dul link DVI cable. But i may try this first since its not only cheaper, but i read horror stories about the Dual Link DVI cable.

What is the best way to consolidate Aperture and iPhoto libraries onto an external drive? I am just starting out and not used to Aperture filing system.

I would like to use the drive as storage/aperture backup rather than use it to back up my whole Macbook. Would like to keep the majority of the photo files on the ext. drive and be able to add files there directly. BUT, when workng in aperture would like to be able to select some from the ext. drive and work them on the laptop directly without having to have the ext drive attached.
So do i, have the aperture library path mapped to the ext drive, and then import the iphoto library? and then how do i add additional from the camera? Or, do i move everything together (imported iphotos and new from camera) in Aperture on the Macbook first, and then transfer that library to the ext drive?
For the life of me I can't figure out how to do this in a way that seems logical. Vaults? Masters on ext drive, versions on the macbook? Consolidating libraries? The endless possible answers are baffling me.
Thanks for any help!

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

What is the best set up for video editing?

What is the best computer? The best software? The best external storage? The best ram? 3D editing? Everything!!!!!!
Running full HD and 720p at 60 fps videos. Clips ranging from a few seconds to 10-30 minutes.
Cost isn't an issue.
What is the best set up, not the most excessive. If it doesn't need to be there or it isn't greatly needed I would like to know. This is looking at the production aspects, not the camera and such. What is the best plug in for slow motion? Pros and Cons of the set up?
I would greatly appriciate everyones input in this. Thank you so much.

That is a hard question to answer.. Nothing is best for everyone... However if i am to generalize it I would put it this way.. If you want to cut everything from a short promos to hollywood pictures..
A high end windows pc (only cause mac pro hasn't been updated in ages)
Avid Media Composer with Nitrus DX
Two monitors
Broadcast monitor
HD Deck
pimping 5.1 speakers
A good mixer
You are looking at over 70,000 or 80,000, could even approach even more.. HD decks run atleast 15k.
If price is not an issue then there you go....
However this is not realistic for most people nor best solution by no means... I run a macbook pro with Avid (as primary) Final Cut 7, Final Cut X (for practice, didn't have to use it for a job yet), and Premiere (just in case)
I am a final cut child who grew up on it and love it however everything I am doing in last few years is on AVID...
Have a second monitor..
I am very portable and rest of the gear I usually get where ever I work at.. I am looking into getting a good broadcast monitor connected with AJA thunderbolt..
Like I said this is very open question, there is no (BEST) it all depends what you will be doing.. If you get AVID (which can do everything, however is cluncky as **** and counter intuitive) but you are only cutting wedding videos and short format stuff, it would be an overkill galore.. Just get FCP X in that case... Simple,easy, one app...
Be more specific and you will get clearer answers..

What is the best set hard drive set up on an iMac for video editing?

what is the best set hard drive set up on an iMac for video editing? i only have one internal 2tb hard drive.

CIANCIO.mov wrote:
so is it best to edit directly off your LaCie fire wire drive, or off the internal HD and store on the external?
The second.
Which one is faster to edit with?
The internal will operate faster but editing uses both the Final Cut Application (on the internal), and the external which is used to store and access the video that you have shot and on which is stored the Capture Caches, and which also stores and accesses the various other caches such as Video Render, Waveform etc.
Does a faster hard drive decrease rendering time?
I think it must, but I have never timed it.
whats Faster, having another internal drive or a thunderbolt or firewire 800 external drive?
I think that a second internal drive would be faster than an external Firewire drive. However, a Thunderbolt drive is said to be very fast, but I do not know whether it would be faster than a conventional internal drive. This question would best be asked of the Final Cut Discussion Groups because thay might have experience.
i would love some specs, and input on different drive setups for an imac with a single 2TB Hard dirve.
Again, the discussion groups would be the best place to answer this.
enyone. thanks,
Rendering long sections of video in the Final Cut software does take a long time, especially when it is imported from another source, such as a .mov, and when something simple like a transition is inserted or even moved or altered, or a filter is applied, rendering must be carried out in that area to see the effect properly. So you are on the right lines in thinking about how to speed it up.

HT4260 I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?

I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.

The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired.

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

What Is The Best Setting To Use To Import Music?Please Help.

Hi, All
I have got an 80GB Apple Video iPod And I am still trying to figure out how to work it as I am new to using iPods.
What is the best setting to use to import CD Music and Music from the Internet to iTunes?? as I would like to listen to the highest quality there is on iTunes and my 80GB Apple Video iPod.
The settings are: ACC Encoder, AIFF Encoder, Apple Lossless Encoder, MP3 Encoder, WAV Encoder. If you have not got them to hand.
Many Thanks For Reading This And Replying To It, Much Appreciated!!
I Hope You All Have a VERY Merry New Year!!
Kind Regards, Rocky Robin

There really is no BEST setting. The "best" setting is the one that sounds the best to you.
Having said that, you also asked what setting provides the highest quality audio. In that case, you need to use a lossless format, such as AIFF, WAV, or Apple Lossless. MP3 and AAC are both compressed formats, and will not provide as good of an audio quality as a lossless format.
My personal preference would be Apple Lossless, but any of the lossless formats will produce an almost identical quality to the CD track.
Keep in mind, the files will be quite large.

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

With supervised ipads, what is the best way to transfer photos and videos from the ipad to the PC? Wireless transfer is not an option in our circumstances

With supervised ipads, what is the best way to transfer photos and videos to the PC? Wireless transfer is not an option in our circumstances.

There are only two ways of transfering things on the iPad.
- via WiFi
- via usb cable
From what I have read, you need to connect to iTunes on the supervising PC.
Robert

What is the best, set up for beginers?

What is the best set up ,for most , older people?

What Adobe program are you asking about?
Also, what is your operating system (Windows, Mac OS, ...)?

What's the best set up with AppleTV and Mac Mini with 2TB external HD?

Similar Messages

Maybe you are looking for