What's the latest version of macbook or mackbook pro with mouse buttons?, what's the latest version of macbook or mackbook pro with mouse buttons?

what's the latest version of macbook or mackbook pro with mouse buttons?, what's the latest version of macbook or mackbook pro with mouse buttons?

Are you talking about MacBooks and MacBook Pros with the two buttons at the bottom of the trackpad and not the buttonless multi-touch trackpad?

Similar Messages

  • My Macbook has version 10.5.8 What version is my next step up? Can I skip to the latest version?

    My Macbook has version 10.5.8 What version is my next step up? Can I skip to the latest version?

    That depends on which OS your MacBook can support. The system requirements for Mountain Lion 10.8 are here...
    http://www.apple.com/osx/specs/
    Go to your Apple Menu > About this Mac and tell us your Processor and Memory specs, that way we'll know what you can do.

  • What is the latest Mac OS X that I can run on my 2.33 GHZ Core 2 Duo Macbook Pro?

    My MBP was running the fan almost constantly and otherwise acting odd so I decided to just refresh the installation from scratch. At that time I was running Lion 10.7.5. Before rebuilding everything with that version I want to make sure running Lion on this machine isn't contributing to my issue.
    What is the latest Mac OS X that I can run on my 2.33 GHZ Core 2 Duo Macbook Pro?
    I have every OS release since the original purchase so I can rebuild on the one that's most stable on this laptop.

    You can run Mt. Lion if you so wish:
    http://www.apple.com/osx/specs/
    If you want the most efficient OS, I would suggest Snow Leopard.
    However I suggest doing some investigation prior to installing a new OS.  First do a SMC reset:
    http://support.apple.com/kb/ht3964
    Also run an Apple Hardware Test.  Use the #2 disk on your original install disk.
    If there is no improvement, post back.
    Ciao.

  • Error message: itunes library .itl cannot be read because  it was created by a newer version.  I downloaded and in stalled the latest version of itunes and it did not help.  What now?

    error message: itunes library .itl cannot be read because  it was created by a newer version.  I downloaded and in stalled the latest version of itunes and it did not help.  What now?

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • HT1338 how do i update my macbook pro from 10.5.8 to the latest software? also please let me know what do i have to do to save my files from being deleted when updating? thank you

    how do i update my macbook pro from 10.5.8 to the latest software?

    First you have to purchase Snow Leopard, 10.6, from the Apple on-line store for $20.  Install and on-line software update from the disk version to the last of the line, 10.6.8.
    Then determine if you can go to Mountain Lion, http://www.apple.com/osx/specs and if you can go to the App Store and purchase for $20 the download of 10.8.3.
    If you cannot go to ML, see if you can go to Lion, 10.7.5, do you have an Intel Core 2 Duo, i3, i5, i7 or Xeon processor at least 2 GB ram and 7 GB free hard drive space.  If so you can purchase a download code for Lion from 1-800-MY-APPLE for $20.
    If you can use Mountain Lion, skip the Lion step and go directly to ML.

  • I am unable to upload the latest version of iTunes.  It worked before and when prompted uploaded the newest version.  Now I'm unable to access iTunes..."Error 7 Windows Error126.  Insufficient privileges".  What do I do?

    I am unable to upload the latest version of iTunes.  It worked before and when prompted uploaded the newest version.  Now I'm unable to access iTunes..."Error 7 Windows Error126.  Insufficient privileges".  What do I do?

    Hey thomashfrompa,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?

    I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?

    Hi Linafrick,
    To install Acrobat 11 on to 6 computers you can purchase Volume License.
    But since you want it for only a month you need to purchase Acrobat subscription.
    A single subscription is good for 2 computers and the same Adobe ID cannot be used to buy multiple subscription copies of Acrobat.
    You can however opt for Creative Cloud for Team license such that you can become the Admin and grant access to the 6 users who wish to install Acrobat on their machines.
    Feel free to reach our customer service via chat to know more information: Creative Cloud membership support
    Regards,
    Rave

  • I just reinstalled and this is the question that show "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?"  what do i do next

    I just reinstalled and this is the pop up that shows "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?"  what do i do next? it just keeps popping up and loading but only gives a quit button?

    Update it.
    How old is your Mac? If it's very recent you need to update via the App Store
    If you purchased at the App Store you need to update via the App Store
    Otherwise you update via Softare Update
    Regards
    TD

  • I installed the InDesign CC Testversion and now i try to open INDD-Files from earlier Version. Always i get the error "This file is made by an earlier Version...." but it´s CC that is the latest Version. What is the problem ? Should i have to convert the

    I installed the InDesign CC Testversion and now i try to open INDD-Files from earlier Version. Always i get the error "This file is made by an earlier Version...." but it´s CC that is the latest Version. What is the problem ? Should i have to convert the files ?

    Adobe has been using confusing version names for at least five years.
    There are now two versions labeled CC, version 9 and version 10 (also known as CC 2014). Version 10 is the latest, and if you attempt to open a version 10 file in Version 9 that is not fully patched you will get an error message telling you that the file cannot be opened. The latest patch for version 9 should use a cloud-based service at Adobe to convert version 10 files to IDML and allow you to open that.
    I suspect you may be using an older operating system. Version 10 requires that your system runs at least OS X 10.7 or Windows 7 SP1 and if you are not it will not even be offered to you.

  • When connecting my iPhone to my samsung laptop, an iTunes pop up stated that my iPhone requires an iTunes version 11.1 or later, however my iPhone has all of the latest software. What do i do?

    When connecting my iPhone to my samsung laptop, an iTunes pop up stated that my iPhone requires an iTunes version 11.1 or later, however my iPhone has all of the latest software. What do i do?

    you update itunes on your computer to 11.1

  • Ever since I downloaded this latest version, my browser is not loading the page. Says can't find the server error. This is very frustrating and slow. What should I do.

    Ever since I downloaded this latest version, my browser is not loading the page. Says can't find the server error. This is very frustrating and slow. What should I do.

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

  • I was on ios 6 beta version...then i restore my ipod to the 5.1.1, which is the latest version...now i m receiving the error in the icloud that "the last backup could not be completed"....so what i do....????

    i was on ios 6 beta version...then i restore my ipod to the 5.1.1, which is the latest version...now i m receiving the error in the icloud that "the last backup could not be completed"....so what i do....????

    You're obviously a developer.  Repost your question in the developer's forum.

  • The Firefox 8.0.1 release is crashing ALL THE TIME on MacBook Pro OSX 10.6.8 after installing latest Flash version

    At this time, Firefox is virtually unusable on the Mac now.
    This is not related to any particular website, although websites with flash or java script or "fancier" I/Fs are assured to crash Firefox.
    For example, a minute ago, I tried to enter a search phrase into Google (main page) and crash. I tried to enter a search phrase into Netflix search window and crash. I hadn't seen a crash on the Fox News pages though and they are rich content.
    Firefox wasn't doing this before the 8.0.1 update (but I can't distinguish this event from the update of Flash to 11.1.102)
    I do know that Firefox is virtually unusable (and I'm in Safari at this moment).
    I suppose its possible that something on the Mac changed (firmware) but why isn't there a problem with Safari then?
    Its not like I have time for a full fledged debug of another software application!!! I don't (and I AM a professional software developer that develops on ALL the platforms/OS including OSX all versions, Windows back to XP, and Linux most flavors and I'm a Qt expert also)
    I've NEVER had this problem before. At first I was leaning towards the Flash update. But now I'm not sure.
    If someone would suggest a progression of moves to isolate this issue, I'll take that much time to troubleshoot this. I can't quite believe that more people aren't having this problem.
    ok.. I'll start with disabling plugins. Then I'll start backing up to previous versions, starting with Flash, then Firefox as these were the latest 2 updates.

    I'm going to back up to Firefox 7 next. I'm getting the drift that 8.0.1 and/or flash on 8.0.1 are unstable.
    I'll let you know if that solves this problem.
    NOPE. This had no effect.

  • What is the best order to upgrade to Lion after putting in a brand new hard drive in my MacBook Pro? Restore first? or install Lion First?

    I  have a 2008 macbook pro with brand new 500GB hard drive and 6GB new RAM.    My old hard drive is backed up on external drive, via time machine. When the shop put in the new hard drive (there was nothing wrong with old one, it was just stuffed to the brim), they loaded snow leopard from a disk, but I haven't put anything from the old drive back on yet....I haven't even configured my mail and am just reading mail  from ipad and phone these days.
    Question: Should I install Lion before I restore all the old backed-up stuff, or is it important to have anything, ( like maybe preferences)  already on the computer when I download Lion.  I want to be selective when restoring from time machine, because my old hard drive had a lot of ancient software and junk on it that had migrated from every computer we've ever owned, and that is many, many.
    So, I'm just stuck on the best way to proceed.  Also, should I install the latest update for 10.6.8 before I download Lion? I see today that some new updates have become available; java, security, safari, and apple software installer.
    Thanks
    G.T.

    Gaye Thomas wrote:
    But I just read your next post, and  it sounds like you think I should do the back-up first, or am I missing something. I think you are now recommending that:
    1. First I should install Snow Leopard,
    2. do the combo update of 10.6.8
    3. THEN USE BACKUP to restore what I want to carry over to new drive.
    4. Then upgrade to Lion.
    I would restore SL and do the Combo 10.6.8 update. Then use your backup to load back in what you want. Then do the upgrade to Lion.
    So what made you change your mind?
    And, just to say again, the hard drive is completely new.  The shop installed 10.6.8 from the installation CD, and I haven't even configured email.  I'm only using safari.  I just now downloaded 4 updates that software updater recommended.  It now tells me it is up to date.  Is there any reason to do a 10.6.8 combo updater?
    Are you recommending to do the back up BEFORE I install Lion, so that there are some preferences and information about old passwords and certain information that Lion will want to know about?  Will it make my life easier to back up BEFORE I install Lion?
    What changed my mind was your second post. You don't want to carry over everything to the new drive and the install of Lion. You only want selective things and of course your personal files.
    For that I "feel" it best to install SL, Update SL to the most current version, Then selectively restore the parts you want and then install Lion on top of that newest install of SL with the selectively restored parts on the new Hard drive.
    That should give you as clean an upgrade as you can get.
    Of course you could go a completely different route. Make the Lion install USB, Save all your program Install files you want to be installed in Lion along with your personal files. Then Wipe the drive and install Lion clean. Then RE-Install your programs and copy over your personal files.
    That is what I would do as I do not like upgrading to a new OS over the top of an older one. I have never found that to be as clean and it always seems to carry over stuff from the older OS to the new one. But that is me.

  • I have a macbook with Tiger.  What are the steps I need to take to upgrade to Lion and the cloud? I have the Snow leopard disk just received from Apple.

    What are the steps I need to take to upgrade my Macbook with Tiger to Lion and the cloud?  I have the install disk for Snow Leopard.

    Hi Carol, good/sound advice by Ziatron so far.
    We need more info about your Mac to see if it will even be capable,
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4
    You'll need to buy SL/10.6 first & get it to 10.6.8, then get Lion... if you can run it.
    Or if you can erase your disk...
    http://store.apple.com/us/product/MD256
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they do still have it:
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
    Snow Leopard/10.6.x Requirements...
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory, (I say 4GB)
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading, (I say 40GB at least)
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
    It looks like Apple will have Lion available on USB drives for $69...
    http://store.apple.com/us/product/MD256

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for

  • How to install Windows 7 on Mac mini Late 2009

    After I upgraded to Mavericks from Lion, I can't edit info.plist file to enable the 'Create Windows bootable USB flash drive' feature in Boot Camp 5.1. Who can help me, please?

  • How to extend notification method to os command in OEM

    Hi All, I am using OEM 12c R1 and want to use an os command as notification method. I wrote a shell script and placed the script on the machine where I have installed OEM. Now I provided the script with its absolute path in the text field of os comma

  • Bootcamp, XP, ATI card & Stalker: Shadow of Chernobyl

    I recently purchased S.T.A.L.K.E.R. Shadow of Chernobyl to play on XP on my Mac Pro While I've read LOTS of posts on other sites about how buggy this game is, my concern (and my reason for posting here) is that the game seems to push my ATI card to t

  • Relinking Graphics Problem - I think!

    When I open a document and need to relink any graphics I click the relink button, navigate to the folder stated in the information part of the links panel, locate the file and InDesign relinks that file and any others in that folder. My question is t

  • Custom Chart XML (Apex 3.2)

    Hi, I am trying to see if I can reduce the space left in between a chart region title and the actual title of the graph (name property). It leaves 2 cm. approx and I would like to optimize the page a little bit. Unfortunately I can't find the propert