What's up with Michael Clayton

I have been trying to download this movie for over 24 hours and I keep getting an error message, but doesn't happen with any of the other movies. Also noticed that although Rescue Dawn is listed as also available in HD on Apple TV, when I go to the Apple TV it is not listed under HD rentals.

I just heard back from support - they said that itunes had a "brief issue" yesterday, but it is now fixed. But it is not fixed - I still cannot access the movie.

Similar Messages

  • I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad.  What's up with that and will I lose these films if I reset this iPad?

    I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad.  What's up with that and will I lose these films if I reset this iPad?

    Thanks.  The reason this has become an issue is that I recently bought a new Macbook Air that the iPad is not synced to.  The one is was synced to was stolen.  If I want to sync this iPad to the new Air, won't it be wiped before I'm able to copy these films or am I wrong about that?

  • What's wrong with my browsers?

    When i first got my macbook the internet was going really slow but then i changed the dns server to 4.2.2.2 and sometimes change it to 4.2.2.1 and the internet got better but now my browsers are acting funny.
    One moment i'm surfing webpages with safari or firefox.... Chatting with AdiumX or MS Messenger... and suddenly it just stops... Msn is getting time-out's, Safari says I'm not connected.
    But Airport sais it is still connected to my wireless network (with all the black bar's filled). It has valid IP adress etc, But everywhere I want to go on the internet it sais I'm not connected.
    When I disconnect the airport en let it reconnect with my wireless network, the connection is fine.
    how can i fix this?

    Most users shouldn't be manually entering DNS addresses, and those DNS addresses you mention probably aren't intended for end users. Is Level3 your ISP?
    That doesn't answer 'what's wrong with my browsers?', but a good start would be to configure your network according to your ISP's instructions. If you have DNS problems then, you might try using OpenDNS.

  • What's wrong with networking since Leopard?

    Hi,
    I'm with Mac since years. I was a PC User once and spent hours with all kinds of network troubles. What convinced me with Mac right in the beginning was easy networking: It just worked!
    But since Leopard things got worse: I have several MBP's, iMacs, Airport Extreme's and Airport Express's at different places which I installed, and I face the same problems at EVERY place:
    - I can't connect to AExtreme for several reasons: timeout, security incompatibility, ...
    - Sometimes only two Macs are allowed to connect to one AExtreme
    - Airport doesn't find Aiport or any other networks for minutes
    - After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
    - Aiport Extreme crashes (yellow blinking)
    - connection loss (even when AExtreme is very close)
    Now I know about networking, about configuration, I've done this for years. Whatever I do, problems disappear and appear again, at different times, at different places with different hardware.
    What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.

    What's wrong with networking since Leopard?
    on my network and many i have setup there have been no problems with leopard. However there are always teething problems with new operating systems. Thankfully with leopard only a tiny percentage of users experience technical difficulties.
    can't connect to AExtreme for several reasons: timeout, security incompatibility,
    is it set to use WPA/WPA2
    Airport doesn't find Aiport or any other networks for minutes
    sometimes my macbook pro takes a while to show up any networks if there are lots in the area this is because it is scanning them all.
    After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
    What kind of router are you using? What happens if you powercycle the router?
    # Aiport Extreme crashes (yellow blinking)
    # connection loss (even when AExtreme is very close)
    Have you tried resetting your AE to default. reinstalling its firmware or checking for a firmware update?
    Have you tried changing hte wireless channel your networ is broadcasting on?
    What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.
    Did you upgrade install your leopard installation or did you do clean (erase) installations?
    Have you tried created new network locations?

  • What's Wrong with My Computer?

    I have a G5 desktop computer, I believe it's referred to as a "Power Mac." My mom purchased it some years ago, I think in late 2005 shortly after this particular model was on the market.
    Info is:
    Version 10.5.8
    Processor 4 x 2.5 GHz PowerPC G5
    Memory 4.5 GB DDR2 SDRAM
    Hard Drive 240 GB (127 GB unused/available)
    My mother wasn't using this computer for many years, and my 13" Macbook was giving me trouble, so she gave this one to me. It's all been great (she maxed out the memory and hard drive space when she bought it, even though it is outdated and insignificant compared to current models), except for one little thing... Browsing the internet is usually fine when it's only one window, but not always. However, it is almost a guarantee that while trying to operate multiple windows and trying to play a video, Safari will crash. And not just once in awhile. I'm talking about on a daily basis. During regular offline computer use, like Photoshop or iTunes, the computer will sometimes grey over (as if someone put a fairly thick grey film over the entire screen), and tell me I have to restart the computer. So what's wrong with it? I presume it is a physical issue (failing memory, mother board, etc.), but what?

    Your computer is not remotely "maxed out" with RAM.
    You're describing a G5 Quad like mine (though mine was built in June of 2006), and maxed out means having 16 GB of RAM installed, like mine has.
    The Frolick wrote:
    …the computer will sometimes grey over (as if someone put a fairly thick grey film over the entire screen), and tell me I have to restart the computer. So what's wrong with it?…
    That's called a Kernel Panic, and, yes, it is most often caused by hardware problems, such as bad RAM or mismatched RAM.  I can't imagine how you get to 4.5 GB of RAM without exponentially increasing the risk of mismatched RAM.
    RAM has to be installed in matched pairs, starting from the center slots and spreading outward: 4*3*2*1*1*2*3*4
    On the other hand, my own personal experience has led me to conclude that Safari is a piece of cr@p.  It causes problems just being active in the background, causing other applications to fail.
    Check your RAM carefully, starting with just one pair of matched RAM sticks in the two center slots, then adding one pair at a time.  Check your hard disk with Apple's Disk Utility.
    The kernel panics can be caused by a damaged directory too, so if you own Disk Warrior, run it.  If you don't own DiskWarrior, at least Repair Permissions with Apple's Disk Utility and use Verify Disk/Repair Disk with it.
    I'd also recommend downloading and installing Applejack and run it according to the instructions.
    Good luck.
    2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.

  • What's wrong with my iPod's Cover Flow??

    I have an iPod Touch 3rd Gen, 32Gb, and recently updated to IOS 5.
    Since then, the iPod's cover flow feature is extremely slow, doesn't flow smoothly, and crashes after a few (15-20) seconds.
    Today I noted something else: some album covers appear pixelated and blurry, even though HD. Those covers looked just fine until now.
    As a side note, I have in use 30 of the 32 Gb (that's a lot of music, I know). Could this be related? I never had those problems before IOS 5, though.
    What's wrong with my iPod?
    Thanks for your help!

    so as I see it people with this problem have 3 options
    - Make all of your album art a maximum of 500X500 pixels
    - Wait for an IOS update that fixes the problem
    - Scrap ipods and buy another brand of music player
    Using photoshop to do it with, it took me about an hour to resize, change, and resync all of my 1400 songs(86 albums)

  • What's wrong with my Final Cut Pro 7.03?

    What's wrong with my Final Cut Pro 7.03?
    I have just started up a new project.
    Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
    The only "new thing" I do - is the use/brand of camera.
    Now I use the canon D5 mark 3 for my project (before D5 mark 2)
    What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
    Final Cut Pro 7, Mac OS X (10.6.8)

    Did you use Log & Import?  Or did you at least convert the D5 files before importing?  FCP doesn't work with those files natively.
    -DH

  • What is wrong with this code? on(release) gotoAndPlay("2")'{'

    Please could someone tell me what is wrong with this code - on(release)
    gotoAndPlay("2")'{'
    this is the error that comes up and i have tried changing it but it is not working
    **Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 2: '{' expected
         gotoAndPlay("2")'{'
    Total ActionScript Errors: 1 Reported Errors: 1
    Thanks

    If you have a frame labelled "2" then it should be:
    on (release) {
        this._parent.gotoAndPlay("2");
    or other wise just the following to go to frame 2:
    on (release) {
         this._parent.gotoAndPlay(2);
    You just had a missing curly bracket...

  • I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square but never downloads.

    I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up with a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square, acts like it's downloading (which I can see happening in iTunes), but never downloads. The Cloud just stays there.
    I've sync'd my phone, I've turned it to "show all music" in Settings, I've drag and dropped the songs/albums onto my phone again. I feel like I've tried everything I've seen recommended, but nothing works.
    I've purchased a lot of music from iTunes. It should be there. What's going on?
    P.S. Same thing happening with my purchased books. Ugh.

    Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match.  Your iTunes Match library will then appear on your iOS device.

  • What's happening with my 2ndGen AEX at night? Pings sometimes go over 1000ms!

    What's happening with my 2ndGen AEX at night? Pings sometimes go over 1000ms!
    My Airport Extreme is perfect all day but sometimes late at night my ping goes over 1000ms. Wired or Wifi is the same. There's no rhyme or reason as to when it happens either. Random times and random nights (sometimes several nights in a row, other times not for week or more). Resetting doesn't help, but If I go direct to the modem, pings are around 15-30ms... normal for me. It's been a problem for me for a while now, and I'm not sure if its the latest firmware update that did it. I first noticed it playing my Xbox 360 sometime last summer or fall. The ping times will suddenly (usually around midnight or 1am) be so high that I can't play any multiplayer games.  I go to speedtest.net and my ping is anywhere from 500ms to 1118ms is the highest I've seen. If I reset the router, it is fine for a couple minutes and then right back to to the high pings. As I said, the modem is fine when I go direct, so something is causing the Airport Extreme to have trouble. It's not the XB360, cause it also happens with my XB1 and only at night. I play during the day, as well, and have no troubles.
    I believe that there are certain programs that can cause this, like Vuze, but this only ever happens when everyone in the house is in bed, and both mine and my wife's laptops will be asleep.  I do have a Mac Mini connected to another TV in the house, but the only thing it should be doing at that hour is its hourly Time Machine backup to a USB drive plugged directly into it. I do have a network drive attached to the AEX, but I only use that for manual backups for our laptops, neither of which is being done when this occurs. My wife and I also each have an iPad (the 2 and an Air) and an iPhone 5.  Could they somehow be causing this? Maybe an automated iCloud backup occuring at night? Although, I use several devices on my network all day long without this kind of thing happening so I don't know why that would cause this kind of problem. Just to round out my collection, I have to older Airport Expresses as well to extend the network and are mostly used for the audio out.

    Test after each of the following steps that you haven’t already tried:
    Step 1
    Take all the steps suggested in this support article. That's the starting point for any further effort to solve the problem. Skipping any of those steps may mean that the problem won't be solved.
    Step 2
    From the menu bar, select
    System Preferences ▹ Accessibility ▹ Speakable Items: Off
    Step 3
    Reset the SMC.
    Step 4
    Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 5
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 6
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

  • My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

    My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
    I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse.  I'll be working on my computer and the thing will freeze.  When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally.  Then I try safe mood and it will then boot just fine.  But there are blue stripes on my screen.  The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes.  I haven't tried reinstalling my software because I don't have the startup discs that came with my computer.  If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed.  I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either. 
    Does anyone else have experience with this?  Is it the firmware or what?  I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
    Please help... Thanks!

    I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them  the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

  • HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying.  The email will sit in my outbox and then at some point will send.  It sometimes takes days.  What is wrong with my settings?

    When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying.  The email will then sit in my outbox.  At some point it will send but it is hardly dependable.  What is wrong with my settings?

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • TA21328 every time I use Safari I receive a message that says Safari is no longer responding because of a script problem with the website and I must press "continue" for the page to continue. This happens with every website I go to.  What is wrong with my

    When using Safari I have begun to notice this box appearing as I try to reach any website:  "Safari is no longer responding because of a script on the webpage and then it lists what ever web page I have tried to reach.  It then asks me if I want to "stop" the script or allow it to continue.  I must "continue" it in order to reach my web page/  If I press "stop" it just keeps coming back and back and I can't continue.  What is wrong with my computer or Sarari or both?

    chick --
    Does it mention "Slow Script?

  • Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

    Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • I have no idea what to do with the payments for stuff I bought on iTunes.

    Ok I had a card from a rebate atatched to the account and it has just expired. Now itunes wants me to pay from a different card for the things I bought in the week before it expired. I had the amount needed to pay for what i bought on the rebate card and bought my last thing before the card expired because i thought it would be stupid to let the money go without actually using it. I was looking today (it expired overnight) at itunes and now its saying i need to pay for them because the have not been pasyed for yet or something like that and i need to update the billing adress but i cant and dont want to one because i dont want to pay for something i had already had the money to pay for and they didnt charge me on it or something and 2 because i dont have another card to use bc i do not have a credit or checking or any card bc other than the rebate card i only have cash. sorry my question is so long but thank you for all the help you people can give me. ps i cant even get a card bc im 15

    The rebate card that my mom let me use was after they had bought a new phone and try had let me have what was left on it 7.92 and it counted as a visa credit card so I could use it to activate my account the problem is that I bought the stuff before it expired and it is now expired and it's sayin I still need to pay for what I bought with the old card and I don't want to pay twice for the same things that's just stupid I'm goin to get a gift card for the lowest amount so I can still get the free stuff but I don't think I should be responsible to pay for something thy I bought with a card that had the money on it for them to charge bc they debt send out the bill to them when I got the stuff bc there is stuff on it for like Monday saying I need to pay for it when the card didn't even expire till Thursday night

Maybe you are looking for

  • My iPhone 5 can't make calls or send receive texts after update to iOS 8.0.

    sa shortly after I updated my iPhone 5 to iOS 8.0.2, I started noticing that it keeps dropping the connection to AT&T. It keeps switching from LTE to 4G then drops the connection and finally says "searching". It does this continuously. If I make or r

  • Problem with addition of jar file to DC

    Hi WDers, I have a DC of type WD. I'm trying to add com.sap.security.api.jar file to this component so that I can get IUser and work on it. I have added this security jar file as an External jar file to the DC. But whenever I try to DC->Build, the ja

  • Filling Idoc data in hierarchy

    Hi, I want to fill the Idoc segments which is in hierarchy     E1IDPU1          E1IDPU5              E1EDU03. for segment E1IDPU1, I am filling in this way.     L_E1IDPU1-DOCNAME = 'FST'.       L_E1IDPU1-DOCNUMMR = WA_BSID-BELNR.       move L_E1IDPU1

  • TalkTalk box for youview?

    I am a new bt customer due to be activated next week with phoneline and unimited regular broadband. I am interested in recieving bt vision also but have not ordered it yet depending if i can get a definitive answer for my question,so..... I have a ta

  • I need to get Keyboard input as well as mouse input on a JButton

    I need to get Keyboard input as well as mouse input on a JButton I have attempted to implement KeyListener. I get the keyCode but I need it to go in to the same String variable as my Actionlistener section.