What's wrong with the Guide?

Today the guide for On demand is wonky and I can't figure out how to get it back to normal. And this white on bright blue has got to go. It's very hard to read. This is going from bad to worse. How do I change this setting back to normal???
Makes me wish I stayed with Comcast.

Are you talking about the recent change to the guide? We just sent out an update that changes the layout, appearance, and color of the guide. There is no way to revert it back.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

What's wrong with the "guided tours"? They won't work on my computer OR my ipad??

What's wrong with Apple's "guided tours"? They won't work on my computer OR my ipad???

The videos all work fine for me. The functioning and performance of these videos have nothing to do with Adobe.
When problems with video appear they often are related to temporary Internet slowdowns or just poor Internet bandwidth.

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

What's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

what's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!

You are not addressing Apple here...
This is a User to User forum...
iTunes Store: Which types of items can I buy in my country?

What's wrong with the fan of my 15 inch retina mbp?

what's wrong with the fan of my 15 inch retina mbp,when i play a big game like Batman ,the fans are so quiet and keep around 2000rpm,but the temperature of cpu is up to 80 degrees.(by the way, i have reseted the SMC for many times,but it doesn't work)

80 degrees F or 80 degrees C?

What's wrong with the code?

public void run()
try
{     for(;;)
     mgr = (RTPManager)RTPManager.newInstance();
     mgr.addSessionListener(this);
     mgr.addReceiveStreamListener(this);
     try{ /*****port1 = port2 = 29261, which port is only used in here
     localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
     destAddr = new SessionAddress(ipAddr, port2);
     }catch(Exception e)
          System.out.println(e + " 4");
     try{
     mgr.initialize(localAddr);
     }catch(Exception e)
     System.out.println(e + " 5");
     //set buffer
     bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
     if (bc != null)
     bc.setBufferLength(20);
     try{
          mgr.addTarget(destAddr);
     }catch(Exception e)
     System.out.println(e + " 2");
catch(Exception e)
     System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?

I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

What's wrong with the wsdl

We are trying to create a proxy from the following wsdl file and getting an error message: illegal syntax: API:Parameter BINDING has initial value
The webservice that we are trying to consume is from TIBCO .
Can someone please help me to find out what's wrong with the wsdl.
<?xml version = "1.0" encoding = "UTF-8"?>

<wsdl:definitions name = "Untitled" targetNamespace = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:soap = "http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:xs = "http://www.w3.org/2001/XMLSchema">
     <wsdl:types/>
     <wsdl:service name = "TIBCO__ABAP">
          <wsdl:port binding = "tns:SOAPEventSourceBinding" name = "SOAPEventSource">
               <soap:address location = "http://192.168.9.58:10001/TIBCO_ABAP"/>
          </wsdl:port>
     </wsdl:service>
     <wsdl:portType name = "PortType">
          <wsdl:operation name = "Operation">
               <wsdl:input message = "tns:Input"/>
               <wsdl:output message = "tns:Output"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name = "SOAPEventSourceBinding" type = "tns:PortType">
          <soap:binding style = "document" transport = "http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name = "Operation">
               <soap:operation soapAction = "http://192.168.9.58:10001/TIBCO_ABAP" style = "document"/>
               <wsdl:input>
        <soap:body use="literal" />
      </wsdl:input>
               <wsdl:output>
        <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:message name = "Input">
          <wsdl:part name = "Param1" type = "xs:int"/>
          <wsdl:part name = "Param2" type = "xs:int"/>
     </wsdl:message>
     <wsdl:message name = "Output">
          <wsdl:part name = "Result" type = "xs:int"/>
     </wsdl:message>
</wsdl:definitions>

Léon Hoeneveld's response works for me. You will need to download a tool that allows you to edit the WSDL and reorder the values.
I've used a freeware tool like notepad++ collapsed all the levels and opened up the <wsdl:definitions xmlns:wsdl... segment and reordered the subgroups beneath it accordingly.
1. types
2. message
3. portType
4. binding
5. service
Thanks again Léon!

What's wrong with the server?

execute me ~what's wrong with the server? I can‘t use the command nohup any longer.Can somebody help me?
root@shhis1new # nohup
Segmentation Fault (core dumped)
root@shhis1new # nohup ls
Segmentation Fault (core dumped)
root@shhis1new # nohup /opt/SUNWexplo/bin/explorer -w all &
[1] 6871
root@shhis1new #
[1]+ Segmentation Fault (core dumped) nohup /opt/SUNWexplo/bin/explorer -w all
root@shhis1new # uname -a
SunOS shhis1new 5.9 Generic_122300-19 sun4u sparc SUNW,Netra-T12
System Configuration: Sun Microsystems sun4u Sun Fire E2900
System clock frequency: 150 MHZ
Memory size: 49152 Megabytes
Best Regards
<email address removed by moderator>
Edited by: 884082 on 2011-11-22 下午10:00

Moderator Action:
You email address has been removed from your post.
You wouldn't want bad people to send you spam messages for the rest of your life, eh?
Moderator Advice:
If this is the same E2900 that you have mentioned in every one of your other forum posts, then it would seem you need to contact Technical Support and open a proper support request. These forums are NOT techsupport and that system seems so poorly configured that it needs deep analysis. Such investigation cannot be done by using an online forum.
The immediate solution is to log on to the SC of that box and power it down, then boot it back up. At least it will be running after that.

What's wrong with the following code?

What's wrong with the following code?
Circle cir1;
double rad = cir1.radius

The circle Object was never instantiated.
In other words, you have set a declaring of a Circle, but it has not been created in memory yet.
You will create it using the " = new Circle( PARAMETERS_HERE ); "
Or some other method that returns a circle.

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store?

All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?

I still have access. Must be your phone or your internet connection.

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

Is there a problem w/itunes store site? after input my cr.card info, i was told that it cannot verify my address, which is correct, what's wrong with the edit the billing info screen?

What is wrong with the edit biling info screen. it cannot verify my address. i triple check my address info
and it is correct.

Use the email form > Apple - Support - iTunes Store - Contact Us

What is wrong with the idl code generated by packager.exe?

Hello everybody,
I am trying to figure out what is wrong with the idl code generated by packager.exe. In the evaluation for the bug posted at http://developer.java.sun.com/developer/bugParade/bugs/4964563.html it says that the IDispatch interface is not exposed correctly and thus early binding of java objects is not possible using the current activex bridge implementation.
As I am no idl expert I have no idea what that means. However, I managed to dig out the idl code generated by packager.exe for the following example bean:
package test;
public class MyBean
     protected int value;
     public MyBean()
     public void setMyValue(int _value)
          value = _value;
     public int getMyValue()
          return value;
     public MyBean getSelfReference()
          return this;
}The corresponding idl code generated by packager.exe is
uuid(81B0BF63-2A55-11D8-A73E-000475EBF021),
version(1.0)
library MyBean
importlib("Stdole2.tlb");
dispinterface MyBeanSource;
dispinterface MyBeanDispatch;
uuid(81B0BF64-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanSource {
properties:
methods:
uuid(81B0BF65-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanDispatch {
properties:
[id(4097)]
int myValue;
methods:
[id(32768)]
VARIANT_BOOL equals(IDispatch* arg0);
[id(32769)]
IDispatch* getClass();
[id(32770)]
int getMyValue();
[id(32771)]
IDispatch* getSelfReference();
[id(32772)]
int hashCode();
[id(32773)]
void notify();
[id(32774)]
void notifyAll();
[id(32775)]
void setMyValue(int arg0);
[id(32776)]
BSTR toString();
[id(32779)]
VARIANT wait([optional] VARIANT var0, [optional] VARIANT var1);
uuid(81B0BF62-2A55-11D8-A73E-000475EBF021),
version(1.0)
coclass MyBean {
[default, source] dispinterface MyBeanSource;
[default] dispinterface MyBeanDispatch;
};Does anyone know what is wrong with this code and maybe how to fix the idl code? Generating the dll should then be easy (I already tried several variations of the idl code but as my idl knowledge is limited it didn't really do what I wanted).

Then the question is why it does work with visual controls (even if you set them to non-visible)?

Red highlight next to code in dreamweaver. What is wrong with the code and is it affecting the websi

What is wrong with the code and is it affecting the website?

Line 107 looks dodgy to me and it won't have any effect on your code. However, it is a good idea to post a complete link to your CSS for us to see it in full and to validate it using external tools. In fact, you could validate the CSS (and HTML) yourself..
<http://jigsaw.w3.org/css-validator/>
Good luck.

What's wrong with the Guide?

Similar Messages

Maybe you are looking for