What settings to make PAL mov file into an NTSC mov file?

I am using Compressor 3.5.3 and I want to know what the settings should be to get my PAL SD material (from mini-DV tapes) converted to a frame rate that will ultimately work with HD 30 material. I have tried one setting that said " SD 10 bit Uncompressed NTSC" and the result is useless. Huge file that will not play. My original test file was 440 MB - but the output file from Compressor is 3.13 GB! The Audio rolls on while Video is stuck on a frame...
I want to create a single timeline in FCP 7 using converted PAL SD with some HD 720 footage. First I have to get that PAL SD into NTSC. Then I have to get it to 720 x 1280 and I think I know how to do that having read a helpful article on the web.
Why FCP does not have a filter/plug-in  to enable easy conversion after all these years of people needing it built in to the program I cannot understand but here we are still struggling to get a program made out of different TV standards technologies.
If someone can tell me what setting to use in Compressor, thank you. If the verdict is that Compressor cannot deliver a decent NTSC file at a reasonable size from a PAL file, pls let me know so that I don't waste any more time.
Thank you.

Thank you Russ.
The DV PAL material is interlaced. The HD 720 footage is progressive I believe.
Since posting the question I have used MPEG Streamclip to do a standards conversion with the PAL material and once I had checked the box to deinterlace, the result looks okay. I have tried out scaling the result to fill a 720 x 1280 frame to match the HD material inside FCP and now I know what that will look like. Not sure yet about using the larger frame size for my project or not.
I would like to see what Compressor achieves for the PAL material doing straightforward conversion to SD NTSC so if you know what setting, under which tab, I should be applying, I will appreciate hearing it. Thanks so much!
Downsizing the HD will be the next test to run...

Similar Messages

  • What settings to make cpu not use its...

    Hi when I Overclock my 4690k, obviously it will run on its full speed even when at idle mode or not playing, MSI boards has this settings to make cpu not use its full power when on idle mode,, so what settings is it??? Anyone???

    CPU Ratio Mode Dynamic
    EIST Enabled
    And As Svet said Balanced power plan

  • What settings to use when exporting HD into QuickTime Movie

    This help call goes out to any Mac user with Final Cut. I need help!!!
    I have a Mac G5 and use Final Cut Pro V. 5.1.4. I Just bought a Canon XH A1 and filmed a few test shoots. Then downloaded to FC Pro. I have been trying to export using QuickTime Conversion. Every setting I have tried comes out more or less square. HELP!!!!
    My Settings:
    In Easy Setup - HDV - 1080i60 FireWire Basic
    Under Sequence the setting is:
    Frame Size - HD (1440X1080) (16:9)
    Pixel Aspect Ratio - HD 1440X1080
    No check mark in Anamorphic 16:9
    Field Dominance- Lower
    Editing Timebase - 29.97
    QuickTime Video Settings:
    Compression - Motion JPEG B
    Under Export - using QuickTime Conversion - QuickTime Movie - Options - Video Settings:
    I tied:
    HDV 1080i60 and 50
    Motion JPEG A and B
    DVCPRO HD 1080i60
    All settings come out squarish!!!

    Hi Patrick,
    Thanks for the info. But I can not get any setting to come out looking widescreen. All settings come out square looking. I have tried every setting I can think of but all the QuickTime exported movies come looking like (i.e.: 800X854) more box than widescreen. I think it must be some setting I do not know about or some combination or possibly the capture setting (easy setup).
    Thanks for your help.

  • Best settings to make QT movie from 23.98 timeline projecting from MacBook

    Hi,
    I want to screen a 4 minute FCP project to a big screen from a projector hooked up directly to my MacBook Pro.
    Since the project is so small, I figure I can get a better image by playing the uncompressed file directly from my HD. Since I don't think I can get a full screen image from FCP, I plan to export the timeline as a QT movie and play that using QT in full screen mode. Correct so far?
    Assuming I am, my question has to do with the FCP export settings to QT. Since the project was cut on a 23.98 timeline, would I gain anything by exporting to QT using the NTSC 48khz - 23.98 setting? Or would I get the same result using the standard NTSC 48khz (30 fps) setting?
    In other words, since I'm not compressing the file for DVD, I'm wondering if I won't get a better QT image using export settings that match the project's FCP timeline settings?

    Just to clarify, when you open an export to QT window from the FCP timeline, is QT default "current settings" smart enough to read the timeline and set those "current settings" to the optimal for that particular timeline?
    For some reason I'd always assumed 'current settings' meant last settings, ie, wherever the QT settings was placed most recently. But from what you recommend, it would appear that this is not the case--that, in fact, the QT "current settings" default constantly readjusts to the specs of whatever project or timeline you're trying to import into it from FCP. Correct?

  • What settings to make QTs like Apple trailers?

    Would anyone be kind enough to save me (more) hours of experimenting by suggesting compression/sample rates/streaming settings, so that I can put movies the size and quality of Apple's trailers on my site without them taking a week to load?!
    I assume they're using streaming, but do you need to be running special server software in order to do this? I know that it's possible to stream without anything special, if your server knows how to deal with streaming files, but would it be as fast as this?
    Many thanks, dru.
    G5 dual 2.7   Mac OS X (10.4.5)   Logic 7.1.1 Mbox (v1) PT LE 7 Loads of Virtual Instruments

    H.264 Decoder, 640 x 360, Millions
    I prefer the H.264 codec. It is currently the most complex QT codec but allows excellent scaling and low video data rates. On the other hand, it generally requires QT 7 for playback. However, usually go with a 23.98 frame rate (as in movie trailers) rather than the 12 fps used in the "commercials." Also, most of my work is targeted for iPod/Podcasting, so I stick with a 320 pixel width. Generally speaking, halving the display reduces the required data rate by one quarter for the same playback quality and keeping all other variable constant. Here are examples of how changing the size may improve quality.
    http://homepage.mac.com/jrwalker4/.Public/Lucas4Test.mp4
    http://homepage.mac.com/jrwalker4/.Public/Lucas5Test.mp4
    AAC, Stereo (L R), 44.100 kHz
    I generally use AAC Stereo 44,100 kHz at 128 kbps for iPod. Please not that the "commercials" were encoded at 44,100 kHz but only 32 kbps or 1/4 my preferred rate. If this suits your purpose, by all means go with it. In fact, if stereo is not needed, you can go with mono at 16 kbps.
    Data rate: 295.90 kbits/sec
    Would tend to use a higher data rate here (like 384 kbps combined or 350 kbps video with 32 kbps audio) especially if you really plan to use the larger 640x360 display. In any case, one of the above examples splits the size difference between your 640x360 and my iPod settings to give you an idea as to the variations you might emply.
    Apple Animation, 32 x 2, Millions+
    Sprite and background tracks would probably not be needed for your files in a straight, normal conversion.

  • What settings for exporting a master file?

    Wondering what would be recommended to export as if you're looking to create a HQ master?

    On the Mac, Apple ProRes is widely used for mastering.
    On the PC, some common choices are Avid DNxHD, Lagarith Lossless, UT, or Cineform codecs. All of those are free downloads. They make large files, yet still much smaller than "uncompressed".
    Check out my recent blog here for PC codec options for Premiere Pro users: http://blog.sharbor.com/blog/2014/06/mezzanine-codec-options-for-pc-video-editors/
    Thank you
    Jeff Pulera
    Safe Harbor Computers

  • Adding second mac to TC - what settings to make TC visible to new iMac?

    I just bought a new iMac; I have a macbook air and I back up to the Time Capsule.  But the new iMac cannot "see" the TC - so step 1:  where's the adjustment in the TC settings to allow the new iMac to see and then backup to the TC?

    How is the new imac connected to the network? If it is connected to the network via the TC and getting internet even if it cannot view the TC. Then there is no adjustment... just reboot everything.. start with everything off and power up in sequence with 2min lag.. modem.. router (if not TC).. TC.. switch and other network stuff.. clients.
    It should magically appear..
    If not start by loading the 5.6 utility
    http://support.apple.com/kb/DL1482
    Lion one is a toy.. 5.6 is a tool.
    Still no TC access then a reset will be necessary but try at least with ethernet .. wireless is always problematic.

  • HT204365 I updated my iPad to 7 and cannot enter the Ibooks or Itones store What settings should make this happen for me?

    I need help with settings to use Ibooks or Itones stores after updating my Ipad to OS 7

    Check: Settings - General - International - Calendar - Gregorian.

  • What settings to make a dvd from FCP 5.1.1

    Where is MPEG2 or must I now use 264 with compressor?
    MacBook Pro   Mac OS X (10.4.6)  

    New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works - what settings do I need to use to make aiffs work?

    I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

    I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

  • When I go into settings to make any changes, I am presented with an administrators name and password, what would they be?

         When I go into settings to make any changes local on the Mac, I am presented with and Administrators' name and password.  Before, it only presented a password, would anyone happen to know what the username is?

    Hi ..
    Open System Preferences > Users & Groups then select the Password tab.
    The name of the Admin account is on the left.

  • Ideal import and export settings to make a master (uncompressed file)

    editing in FCP VERSION 6.0.5 ON A MACBOOK PRO. The footage I'm working with is one 26 GB Quicktime file (16 minute duration), standard definition, 725 x 576, 10 bit uncompressed.
    Basically I need to make this file, which is a short film, 1 minute shorter to be eligible to enter it into the Cannes Film festival next week.
    What would be the ideal import and and export settings to make a new master e.g. to create a new file that is most uncompressed.
    I very much appreciate your help!

    It seems that every time you reply your goal has changed.
    If you're worried about the self-contained movie requiring FCP to open, that's a simple fix. Right-click on the file and choose Get Info. In the Info window, change the 'Opens With' to QuickTime Player. You'll maintain the best quality and others won't need FCP to open it.
    -DH

  • .mov fil (pal) to be converted to NTSC

    Hi I have a .mov fil to convert it a ntsc dvd. I am looking for a workflow white papper if any so I can follow the steps.
    there is such a lot of advice / tip on the web but I don't know what to trust need a good converation.
    In AME it looks like you can add a preset for it to make a mpeg2 file(ntsc) My question has any one done this with good resultss and is it the right way to go.
    any help in clearing this question out for me will make my Sunday a happy day.
    Thank for reading.
    Trevor

    You're not likely to get 'good' results going from PAL to NTSC on your own.  There are some key differences which make quality conversion difficult.  A post house with proper hardware/software could do it, but who knows how much that would cost.
    Of course, this all hinges on your definition of 'good'.

  • What are the best settings to make a DVD?

    Hi!!!
    I want to make a DVD. I am using Adobe Premiere Pro CS4. My video uses a image (i havent chosen the width x height yet because i do not know what is the best for picture quality on DVD, any advice?). I also use text which is made by clicking on Add Titles in Premiere Pro. Also i have a mp3 which plays throughout. (There is actually no moving video, just an image still, and the text I add which changes every few seconds)
    My question is: For optimal picture and sound quality on DVD, what are the best settings to begin the project with? (i.e. PAL? HD?, etc). Second question is: For optimal picture and sound quality on DVD, what settings should i have when exporting? (i.e. Format: MPEG2? MPEG2-DVD? H.264? ect,   Preset: 1440 x 1080i? PAL DV High Quality? etc)
    Note: after exporting the file, i will send the master to a DVD duplicating company who will put the file onto DVD for me.
    Many, many thanks!

    To give you just a bit more background, for DVD-Video (well, if it's burned, it's officially DVD-ROM, but you get the picture), the Transcoding will be done to MPEG-2. For the best Audio, I would stick with PCM/WAV, which will be slightly larger, but with better fidelity. Note that with BD, you have some other choices, but fewer for DVD-Video. Also, even though MPEG Audio was optional in PAL-land, it is falling out of favor. The two choices are DD AC3 (a flavor of MPEG), and PCM/WAV, which will give you the best Audio.
    With Adobe Dynamic Link, you do not need to be too concerned with the Transcoding yet. In Encore, you can choose the parameters for the Transcoding, or leave it set to Automatic and Encore will calculate the space on the disc, and come up with a very good Transcode setting. If you decide that you want to do those settings yourself, please spend some time on the Internet reading about "bit-budgeting." There are also 3rd party Transcoders, that some feel are superior to those used in the Adobe products. There are several recommendations in this forum. Again, you will want to study bit-budgeting first.
    Good luck,
    Hunt

  • When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

    When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

    Hi,
    Already mentioned on the following post:
       http://h30434.www3.hp.com/t5/Other-Notebook-PC-Que​stions/VGA-on-laptop-HDMI-on-TV-needs-connected/m-​...
    You need a CONVERTER, not ADAPTER The setup:
    The following list may help:
         http://www.ebay.com.au/sch/sis.html?_kw=HDMI+To+VG​A+COMPONENT+Adaptor+A+V+Digital+Converter
    Laptop (VGA) ---- Converter from VGA to HDMI ------ TV
    You also need sound, you can buy a converter with sound OR connect sound directly from laptop to TV.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Please help! Looking for script to insert current date on page.

    I currently use a Dreamweaver Extension that lets you insert current date and time on your web page. The problem is, I don't know Javascript and cannot edit the Javascript codes to "remove the time" I only need the current date that will change every

  • When i change name of artist it automatically reverts it to original.

    When I change the name of an artist, in my case, its the blow soundtrack. The artist is currently called sountrack, and i try and change it to blow. But when i double click it to listen to it, it plays but the name changes back to soundtrack. This ha

  • [SOLVED] bluetooth problem - bluez-simple-agent exception

    Hi I am trying to pair to a bluetooth headset. I think I'm almost there, but at the last step I get an exception. This is what i did so far: 1) launch dbus rc.d start dbus 2) launch bluetooth rc.d start bluetooth 3) check if my device is UP # hciconf

  • Is Imovie the best app for history of a business

    Is Imovie the best app for making a presentation on the history of a business?  It caused multiple crashes on my MacBook Pro and dowloaded commercials did not have audio at all. 

  • Kernel Panics on a Brand New Retina Macbook Pro

    Hardware Overview:   Model Name:          MacBook Pro   Model Identifier:          MacBookPro11,3   Processor Name:          Intel Core i7   Processor Speed:          2.3 GHz   Number of Processors:          1   Total Number of Cores:          4   L2