What should I use BCS or directly connect to sql server to get data.

Hi All,
I have a requierment where the data is in the sql server.
We are using sharepoint webpart to show the data from the sql.
Should i get the data from the sql server using connection string.
Is there any better way to get data from Sql server table and show that in the custom asp.net form.
Regards
Vinod

As I see the questions is in SharePoint 2013 forum.
Assuming you have SharePoint 2013/2010, you can create Create/Read/Update/Delete operations on directly sql table using BCS service of SharePoint. That will save you default development of web part and handle all information properly.
If you don't want to use BCS and sql (not sharepoint sql) information required, you can create custom web part/app part.
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

Similar Messages

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.

amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

Hi,
Based on your description, I have done a test and I can’t reproduce your issue.
I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
1. Use SharePoint Designer to open another site and check whether it is successful.
2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
3. Perform the connection procedure under another environment and verify whether the issue is resolved.
If the issue persists, can you provide related screenshots for further troubleshooting?
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

.Using Oracle Heterogeneous Services Connectivity to SQL Server :ORA-02068

Hi,
I using oracle HS to connect sql server but error ora-02068: following server from HSSQL and ORA-03135 connection lost contact.
step by step
1. Create the init.ora file = initHSSQL.ora
HS_FDS_CONNECT_INFO = HSSQL
HS_FDS_TRACE_LEVEL = OFF
2. modified listener.ora file
SID_LIST_LISTENERHSSQL =
(SID_LIST =
(SID_DESC=
(SID_NAME=HSSQL)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM=hsodbc)
LISTENERHSSQL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = CEPITA1403.siam.local)(PORT = 1521))
and start listernerHSSQL = pass
3.modified tnsname.ora :
HSSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = CEPITA1403.siam.local)(PORT = 1521))
(CONNECT_DATA =
(SID = HSSQL)
(HS = OK)
and test by tnsping HSSQL = OK
4.setup ODBC SQL Server
Start --> Control Panel --> Administrative Tools --> Data Sources (ODBC)
Click on the ‘System DSN’ tab.
Click ‘Add’.
Name HSSQL
Click ‘Test Data Source…’.--> Pass
5
create public database link HSSQL
connect to sa
identified by xxxxxxxx
using 'HSSQL';
Database Link created.
6. select * from ACCOUNT_CODE@HSSQL;
show error message : ora-02068: following server from HSSQL and ORA-03135 connection lost contact.
Please let me know.
rose
Edited by: user7218901 on Mar 25, 2009 12:39 AM

Do you have all of your parameter files set up correctly?
You need to have a hsora file in the hs/admin directory for ioi for instance, initioiDB.ora. In this file you need to set up your hs init parameters. This is an example of what's in one of mine:
HS_FDS_CONNECT_INFO = Mapics
HS_DB_NAME = MAPICS
HS_DB_DOMAIN = WORLD
HS_FDS_TRACE_LEVEL = ON
The you need to have an entry in the tnsnames.ora file in the network/admin directory for hsodbcxtrad. The sid should be set to ioiDB.
You can find documentation on how to manage heterogenous services in the online documentation.
Managing Heterogenous Services Using Generic Connectivity
Hope this helps
Eric
I have been trying to set up a database link between Oracle and SQL Server, currently both on the same Windows NT machine.
I managed to create the link as follows:
CREATE PUBLIC DATABASE LINK ioi
CONNECT TO IOItest IDENTIFIED BY mba
USING 'hsodbcxtrad';
The link is created successfully.
I then try to run a query and get the following error :
select * from dealer@ioi
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: [Microsoft][ODBC SQL Server
Driver][SQL Server]Login failed for user '\'. (SQL State: 28000; SQL Code:
18456)
ORA-02063: preceding 2 lines from IOI
I have added a UID and PWD to the registry settings for the SQL Server DSN but this makes no difference. Do I need to specify a username and password somewhere else ?
Thanks
Hugh

What is the application name when CMS connects to SQL server 2005

Hi, We are BOXI R2 SP3. We have 3 servers with CMS installed on each. We have 3 separate web servers. When I monitor sessions in SQL server 2005 then I see 6 process. 2 process are from each processing servers but the application name for 2 servers ( 4 processes) are WIndows Installer-unicode and for third server its Business Objects Enterprise.
I think all the env should be same in a cluster so not sure how to correct this issue.
Thanks,

No Answer so closing this topic.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Steps to change universe database connection from SQL server to Oracle 10

Hi,
we are moving from sql server to Oracle 10.Please let me know the steps and various parameters I should consider while changing universe database connection from SQL server to Oracle 10.
Following are the steps which I assumed :
1.     create a new Oracle database connection or edit the existing connection to point to Oracle server
2.     Need to check sql for each object, having integrity check for universe will solve the purpose of parsing each object
3.     Exporting the universe after integrity check
4.     Report data testing
Let me know if I miss on any steps.Also what all factors I need to consider while moving to Oracle for eg: what @ custom sql,what @ table names,what @ LOV etc.
Kindly reply

Thanks Abhijeet and Shreyash,
I will follow the steps you have suggested.
Actually I was searching for this on net and got to know that with Oracle database connection,theres lot of stuff needs to take care of in terms of custom sql and LOV and in our case,we have lot of custom sql for each object in the universe so just wanted to confirm.
I will do the changes and let you guys know in case theres any isuue specifically to Oracle.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Should I use BCS my backend database will update all the record of the sql table daily.

Should I use the BCS where the database table is going to be updated daily.
All the records will be updated on daily basis.
Why should I use BCS when I can connect to the sql server directly and update the records that I need.
What additional benefits can I get from BCS , I do not need the search functionality.
Regards

Hi,
According to description, my understanding is that you want to know if you need to use Business Connectivity Services to connect external SQL table.
Business Connectivity Services is a centralized infrastructure in SharePoint 2013 and Office 2013 that supports integrated data solutions.
Business Connectivity Service will provide a familiar user interface to manage sql table data. It is more security for reading and writing data to external sql table.
Here is a detailed article for your reference:
https://technet.microsoft.com/en-us/library/ee661740(v=office.15).aspx
https://msdn.microsoft.com/en-us/library/office/ee556440(v=office.14).aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

What should I use to clean the trackpad?

I bought iKlear to clean the screen of my MacBook and it works great. I have been using it for years on my iBook. I was reading the directions and it says not to use it on the trackpad. I had used it on my iBook trackpad with no problems. What should I use then to clean my trackpad? Why should I not use it on my trackpad? Anyone have suggestions or used iKlear on their trackpad despite iKlear's warnings?
Thom

A very slightly damped cotton cloth works wonders. Just be sure to wring it out as best you can so no liquid gets anywhere you don't want it to be.

Just got my new iphone4 but nothing is happening. all that appears on the screen is an itunes icon. what should i do now. i have connected it to my laptop and have opened an itunes account. help

just got my new iphone4 but nothing is happening. all that appears on the screen is an itunes icon. what should i do now. i have connected it to my laptop and have opened an itunes account. help

That voucher only works in the country in which it was purchased. Are you trying to use it in another country?

What should I use? Vectors or...

I'm storing a large amount of Person objects, this is for a type of game I'm trying to create where it saves the players name, wins, losses, rank, etc in each Person object (this will all be in a text file also). I want these so that they can be sorted by any one of these statistics. I'm not sure how to go about this. Vectors were the first thing that came to my mind, but then I thought about LinkedLists, but I don't know much about them yet, I just know it's an option. My brother told me use LinkedLists, but that's all he would tell me. What should I use for this kind of task? All suggestions are welcome, I need a little help with this design. One more thing about this, players will be added and removed also. I really need some insight, thanks.
This is a side question, if someone could answer it, that would be nice, otherwise it's ok. How does a LinkedList differ from a Vector? Can't everything a LinkedList do, a Vector can do also with the same amount of ease? All I know that LinkedLists point to the next and previous nodes or something like that, not really sure what its advantage is. Thank you.

An array memory for holding each of the objects is allocated when you create it, hence you have to define the number of object you want when you create it.
+--+--+--+--+--+--+
|I0|I1|I2|I3|I4|I5| < Indexs
+--+--+--+--+--+--+
|V0|V1|V2|V3|V4|V5| < Values
+--+--+--+--+--+--+Pro: you can access the data quickly, as you have a direct refrence to each value, via it's index.
Con: Fixed size
Con: Waisted space
A Vector is a growable array.
It does this by creating a fixed sized array, then waiting until it's full, then creating a bigger one and then copying all the data from the smaller, old array to the new, bigger array. This means that every now and again you suffer a performce hit as your array grows.
Pro: you can access the data quickly, as you have a direct refrence to each value, via it's index.
Pro: Not a fixed size
Con: Will slow down when it grows.
Con: Waisted space
A Linked List does not have this problem each element holds the refrence to the next, unlike an array where the "system" holds a refrence to each element. This reduces its memory footprint, however its slower to search through as you have to loop through all the objects.
+----+----+
|DATA|LINK|
+----+--|-+
        |     +----+----+
        +--> |DATA|LINK|
              +----+----+Pro: Growable
Pro: Size
Con: Slow to search
There are things you can do to speed up a linked list (double linked lists & improve the order in which they are added) but it's still slow.
I'll leave choosing the data structure to you.

Virtualization...what should i use?

Hallo.
I'm planning to virtualize a Quad core / 4gb ram. I'd like to build 2-4 virtual machines for testing some advanced features of Asterisk / MySQL and some other well known softwares. I have some licenses for Asterisk addons from digium, so i'd like to maintain them over time, using the virtual machine and moving it.
What should i use? I don't need fancy 3D Acceleration, just a common abstraction for all the hw i have (pretty standard: usb, nics, harddisks...).
I was thinking about Xen Server or Virtual Box (anyway, i'm using them for my personal lab, so i'd prefer solutions that don't require a license...).
The solution should be "headless", i don't want to be forced to login to X every time the guest systems need to be booted...
Thanks in advances.
See Ya
Luca

i've started playing around with QEMU/KVM a couple days ago, and i like it. was using vbox before, which i didn't.
i haven't noticed any mouse lag yet, after installing a few of the main distros i wanted to try out again: fedora 19, debian wheezy, ubuntu (latest, whatever the no.). only trouble i have that so far i wasn't able to get a mouse working properly in an archlinux guest probably something i'm doing wrong, but couldn't figure it out yet.
tried a few GUI frontends, but found that i'm better off starting VMs from the command line: less confusing, and all of the GUI apps i tried had some quirks, like didn't find proper directories or executables.
using KVM and virtio drivers, it's pretty fast; admittedly not as fast a bare metal install, but not slower than i remember vbox (just my impression, no benchmarking or such). assuming i'll get the arch guest trouble sorted out, i'll stick with KVM/QEMU.
Last edited by phanisvara (2013-08-02 11:43:23)

Is it possible to raise the bit rate of songs higher than 256 on iTunes? If not what should i use or do to raise the bit rate of songs?

Is it possible to raise the bit rate of songs higher than 256 on iTunes? If not what should i use or do to raise the bit rate of songs?

Songs you rip from CD can have their bitrate increased to a maximum of 320Kbps from the iTunes preferences; alternatively, the default encoder can be changed to a lossless one. Songs from other sources have a fixed maximum bitrate.
(67928)

What should I use as parameter name in call.addParameter in WS DII client

I'm using dynamic invocation interface to call a web service in Oracle OC4J.
The part of WSDL "Types" is:
<element name="myType" type="tns:myType" />
   <complexType name="myType">
     <sequence>
       <element name="sss" nillable="true" type="string" />
     </sequence>
</complexType>
...My J2SE client has following code I belive create problem:
call.addParameter("sss", input,MyType.class, ParameterMode.IN);when I invoke the web service, I got error:
javax.xml.rpc.soap.SOAPFaultException: caught exception while handling request: unexpected element name: expected={http://mypackage/B2BGateway/types}myType, actual=sss
I changed my code according to this message as it expected to be:
call.addParameter("{http://mypackage/types}myType",
     input,MyType.class, ParameterMode.IN);I got :
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Error parsing envelope: (2, 179) Expected name instead of {.
seems the "{" should not be part of parameter name.
Then, what should I use as parameter name.
BTW, the web service server side code should works fine as I can test it with others client.
Thanks

Moved one step further:
I changed abit to code:
call.addParameter("myType", input,MyType.class, ParameterMode.IN);I can see the server side got SOAP request:
   <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <env:Body>
         <myType>
            <ans1:sss xmlns:ans1="http://mypackage/types/">abc</ans1:sss>
         </myType>
      </env:Body>
   </env:Envelope>As you can see, the problem in the generated request is "myType" does not have namespace
Could someone tell me how to fix it.
Thanks
Edited by: John618 on Feb 21, 2009 5:03 PM

What should I use BCS or directly connect to sql server to get data.

Similar Messages

Maybe you are looking for