What third party drive do I use to connect my umi-7764 to a phytron stepper motor (zss66)

I would like to connect my phytron stepper motor (zss66) to my UMI-7764, do I need a third party drive ?
And if i need one, which one ?
Thank !
Seb (I am french so if you want to aswer french, let's go )

Sebastien,
l'UMI 7764 n'est qu'un bloc de connexion. En aucun cas celui ci ne délivre de puissance. Donc il vous faudra nécessaire un bloc puissance entre l'UMI et votre moteur. L'UMI 7764 ne délivre aucune puissance.
(N'oubbliez pas d'aimenter l'UMI avec une alimentation 5V externe. Ce 5V est à connecter sur le connecteur situé au debut du boitier).
National Instruments fourni des drives (MID 76XX)dont les specs sont limités en courant. (Elles sont affiché dans le lien ci dessous). Dans le cas de l'utilisation d'un drive NI, il n'est plus nécessaire d'utiliser l'UMI 7764.
Le choix de votre drive se fera en fonction du nombre de phase de votre stepper, et de son courant nominal.
Voici un lien sur lequel vous trouverez une liste de drive pour stepper. (Voir
le bas de la page web)
http://www.ni.com/devzone/advisors/motion/driveadvisor.htm
Je ne connais pas les spec de votre stepper, mais si vous désirez l'utiliser avec un UMI 7764, le plus simple serait de contacter la fbricant de ce moteur, et d'obtenir une liste de drive que celui conseille.
Raphael TILLET
Ingénieur Application
NI FRANCE
Cordialement,
Raphael T

Similar Messages

What thrid party tools are you using for backup compression?

I have a few SQL Server 2008 standard edition instances and I'm curious to what third party tools people are using for backup compression. I know upgrading to enterprise edition or SQL Server 2008R2 or above will give me that compression but I do not
have that option right now. I'm familiar with Idera, Red gate and Litespeed and I just want to know what else is out there.
Thank you in Advance.

There are many third party tools.
But Why third party tools?
SQL Server integrated Backup and restore feature is complete. For more info please see these links:
Backup Overview (SQL Server)
Introduction to Backup and Restore Strategies in SQL Server
SQL
Server Backup Best Practices
sqldevelop.wordpress.com

What Third Party Software to Modify Time Machine Backup Schedule?

Hello -
I was hoping to get some suggestions to what third party tool to use that will allow me to change the timing of backups from the regular hour intervals. As far as I know that cannot be changed in Time Machine and am looking for suggestions of software that will allow me to modify the schedule.
Thanks in advance...

Katie 'OConnell wrote:
This may be so, but Time Machine DOES say that it will continue backing up files until the hard disk is FULL. That could be a problem if one doesn't have a massive HD that can be dedicated exclusively to this activity, nor tons of money to purchase extra HDs so that Time Machine can back up to its heart's content.
Frankly, I don't need hourly backups and would prefer to eliminate those altogether.
The hourly backups don't really add much space, since they're only kept for a day, but they do protect you better. If you back up less frequently, you can lose more when (not if) your internal HD fails, or something else awful happens to your Mac.
And there's a much better chance of recovering a previous version of a file that you change or delete in error (ever do "Save" instead of "Save As"?), or that somehow gets corrupted.
As noted on the Time Machine Preference window, after 24 hours, it keeps one backup per day (the first) for a month, then one per week as long as there's enough space. After that, it automatically deletes the oldest backup(s) to make room for new ones.
It varies widely, of course, depending on how you use your Mac, but Time Machine usually needs 2-3 times the space of the data it's backing-up to keep several months, or more, of backups.
By the way, if you're mixing other data with your backups, in the same partition, that's going to be a problem sooner or later, but it's easily avoided by partitioning it. See #3 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Message was edited by: Pondini

Intersense Inertiacube, IC3, ITrax2, InterTrax2 -- third party driver for Labview

Hi,
I've been attempting to use the third party driver located at:
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=1540162FC7953043E0440003BA7CCD...
to communicate with an Intersense Inertiacube via Labview 8.2. It does work, but it causes sporadic Labview crashes as well. Typically Labview will crash in one of the following scenarios (in order of frequency):
- upon editing any VI after running and successfully stopping the Intersense communicating VI
- upon stopping the Intersense communicating VI (not the halt button, but a healthy stop)
- upon starting the Intersense communicating VI (very rare, and typically only after several successful starts/stops of the VI)
My hunch is that this is a memory management issue related to the third party DLL wrapper (isense_dll_wrapper.dll). Does anyone have any experience with this? Anyone know the history of who wrote the wrapper? Is the source code available? Is there a way of having the DLL open/run in its own memory space, separate from Labview's memory space?
Is there a way of having the VI run in a separate memory space from the rest of Labview (so at least if it does crash it won't take all of Labview with it)?
Thanks for your time,
~ Jay

If anyone knows how to contact Sacha Emery, ATE Systems Engineer @ NI, he may have more information regarding this. (He may even have the DLL wrapper source code.) His name is in the ITrax2 Readme.txt file as the creator.
~ Jay

Motion control: PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2

Dear community,
This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
Hau Nguyen.

Dear Community,
I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
Hau Nguyen.

Disabling a Third Party Drive/Motor thru a Relay

I can’t seem to get my INHOUT signal to disable my drive/motor. I have the PCI-7342 Stepper/Servo Motion Controller with the UMI-7764 connected to a third party drive and servo motor. My third party drive requires a constant 24 volt signal to enable my drive/motor. I have the INHOUT connected to a relay in order to control this 24 volt signal. When there is 5 volts at my relay this will enable my drive, when the 5 volts goes low then my drive will be disabled. I have the drive wired up per the attached schematic. Any suggestions would be appreciated.
Thanks,
Nick Argyros
[email protected]
Nick Argyros
Interconnect Devices Inc.
Electrical Test Engeiner
[email protected]
Attachments:
Motor Wiring Diagram.pdf ‏131 KB

If you use the source current of the INH output it probably will not be able to drive a 5V relay. Jochen's calculations are valid for the limiting current, i.e. the current where the output voltage will be zero. With a resistive output the output voltage will depend on the current needed by the relay coil and will never reach 5V.
It is better practice to use the 64mA sink capability of the INH output. But of course in this case the relay will be activated when the output is low. In your case you may wire the relay between +5V (do NOT use the +5V pin of the 734x connector!!! - you may use a +5V terminal of the UMI box provided your UMI power supply can supply the UMI box plus the relay current) and INH, and use the N.O. contact of the relay.
If this is not desired I would suggest to add an extra output transistor (any small signal transistor can sink 100mA or more) connected as an inverter or a driver IC such as an ULN2803. A single transistor has a saturation voltage of less than 0.5V, and most, if not all, relays rated at 5VDC will switch reliably at 4.5V. Check the relay specs for the 'must on' voltage.
Never, I said NEVER, connect a relay to a semiconductor device without a snubber diode. The diode should be connected across the coil terminals (and close to them), with the cathode to the (+) terminal. It will short the inducted high voltage when the relay is de-energized. Some relays have integrated snubber diodes.
Also, I see from your diagram that the emergency switch can be operated at a certain relay position only. At least in Germany this would be illegal since the emergency switch has to be independent from any other control circuitry.

What external Hard drive should I use for Final Cut Pro?

Hi:
I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
PD: I have a NVIDIA on a PCI Express graphic slot.
Thanks,
Cabezon

You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
bogiesan

What XA JDBC driver should I use with Oracle 8i 8.1.6

I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using the driver in
a ConnectionPool in a TxDataSource for use by some entity beans using EJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 Server VM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver for Oracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any other drivers
that I can use for Oracle 8.1.6? Which driver and which version should I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle 8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Which drivers
are faster, and which support more features? I assume that I should not use the
type 4 driver since I am not using an applet, but I don't know if there are bugs
in the OCI C library for Solaris or in the JDBC drivers that use it that prevent
XA from woking. Which version of the Oracle C OCI library should I use if I use
a type 2 driver?
Thanks,
Ross Goldberg

Hi,
I think you can't use the 8.1.6 thin driver for XA, you would have to
use the OCI driver or 2PC-enable your datasource. AFAIK this has been
changed for 8.1.7
Check http://e-docs.bea.com/wls/docs61/////jta/thirdpartytx.html.
Daniel
-----Original Message-----
From: Gene Chuang [mailto:[email protected]]
Posted At: Thursday, August 30, 2001 2:04 AM
Posted To: jdbc
Conversation: What XA JDBC driver should I use with Oracle 8i 8.1.6
Subject: Re: What XA JDBC driver should I use with Oracle 8i 8.1.6
I've asked this question before. This is the reply from Joe
Weinstein:
For reliability and JDBC 2.0 compliance, I recommend the
Oracle thin driver.
If not that driver, you should verify that a type-2 driver
actually does
deliver better performance, but then I would not have a
strong preference
between their type-2 and ours. Theirs may be faster, and JDBC
2.0 compliant.
Both are succeptible to OCI bugs, some of which only they can
fix, but we
listen.
Gene
"Ross Goldberg" <[email protected]> wrote in message
news:[email protected]...
>
I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using thedriver in
a ConnectionPool in a TxDataSource for use by some entity beans usingEJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 ServerVM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver forOracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any otherdrivers
that I can use for Oracle 8.1.6? Which driver and which versionshould I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Whichdrivers
are faster, and which support more features? I assume that I shouldnot use the
type 4 driver since I am not using an applet, but I don't know ifthere are bugs
in the OCI C library for Solaris or in the JDBC drivers that use itthat prevent
XA from woking. Which version of the Oracle C OCI library should Iuse if I use
a type 2 driver?
Thanks,
Ross Goldberg

What Internal hard drive can I use to upgrade my macbook pro 2010

what Internal hard drive can I use to upgrade my macbook pro 2010

You may use any 2.5" SATA notebook drive not higher than 12.5 mm that uses either 1.5 or 3.0 Gb/s interface. Visit OWC for available options and prices.

How do you make third party application window backmost using labview

Hi Guys
I know i can do whatever i want on labview windows.i can make third party application window frontmost.
But How to make third party applicaiton window backmost using labview.
Thanks

Hi wenjie1wang,
I have attached an example that uses the "Call Library Function Node" that accesses the "user32.dll" file that is responsible for manipulating with the windows such as minimising it.
After opening the VI you have to enter the name of the window you want to minimise, you can hard code that as a constant. Also on the front panel the control "nCmdShow" can be changed to dictate the action you want to do with the window.
Furthermore, please look at the Microsoft Developers Network to find more useful ways to use the property node in your project.
http://msdn.microsoft.com/en-US/
Let me know if this works.
Regards
Art
Applications Engineer
National Instruments
Attachments:
Minimise Window in Win7.vi ‏14 KB

What third party softwares can get me past my passcode?

My friends got into my phone and changed my password. It has been disabled multiple times and i do not want ot attempt again. I have photos that are on my phone that I need to keep and they are not backed up. Are there any safe third-party softwares I can use to get past this passcode?

NO there are no 3rd party software.

What third party RAM is equal to "1600MHz DDR3 SDRAM - 4x8GB" for the NEW, 27" 2014 4K iMAC and is it advisable to buy instead of the Apple upgraded RAM?

What third party RAM is as good as the "1600MHz DDR3 SDRAM - 4x8GB" upgrade that Apple offers for the NEW, 27" 2014 5K iMAC Retina?
And is it advisable to buy instead of the Apple upgraded RAM? (my understanding is that third party RAM is not as costly).

go with one of the quality sources for ram OWC and Crucial are very well thought of
your options with the 5K when you buy it are
8GB 1600MHz DDR3 SDRAM - 2x4GB
16GB 1600MHz DDR3 SDRAM - 2x8GB [Add $200.00]
32GB 1600MHz DDR3 SDRAM - 4x8GB [Add $600.00]
you might want to go with the 16GB option when you buy if you know you might want to go to 32GB some day as that will get you to 32zb at the lowest cost. or you can start with the 8 and add 8GB sticks as you need them but if you are not happy stopping at 20GB you will end up with a pair of 4GB sticks to try to sell on ebay... or if you are lazy like me you get a couple of extra xmas tree ornaments.. i have 35 years of ram methods on my tree now dating back to the extra ram for my Apple ][ extra 8k and not a few obsolete processor ornaments too... dress em up with glitter so they sparkle
this is the owc page for ram for the 5k iMachttp://eshop.macsales.com/shop/memory/iMac/Retina-5K/DDR3L
8.0GB PC3-12800 1600MHz SO Kit (4GB x 2) w/Lifetime Warranty
Same Day
$99.79
12.0GB PC3-12800 1600MHz SO Kit (4GB + 8GB) w/Lifetime Warranty
Same Day
$147.50
16GB PC3-12800 1600MHz SO Kit (8GB x 2) w/Lifetime Warranty
Same Day
$197.99
32GB PC3-12800 1600MHz SO Kit (8GB x 4) w/Lifetime Warranty
Same Day
$395.00

What is the best cable to use to connect my MacBook Pro to my LG HD TV

What is the best cable to use to connect my MacBook Pro to my LG HD TV?

Read the tv user manual to see what they recommend.

What cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me

what cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me

You need either a FireWire 800 to FW 400 cable or a FR 800 (male)/FW(female) adopter.
However. it the Mini (note that you still have the late 2012 Mini, Apple has not updated the Mini since then) has Mavericks it may not work satisfactorily. I tried it on my 2102 and I get abount 1 frame every 20 seconds. Another uses posted same problem.
However, it it work fine on my late 2009 Mini with Mavericks

Cannot create data source using custom third-party driver

Hi,
I've just installed Weblogic Server 10.3.6 and I'm getting problems creating a generic data source using my own third party jdbc driver which I had no problems doing in Weblogic Server 10.0; this is what I did in 10.0;
before starting server i put my driver jar file (and any jar files it needed) in the lib folder of the domain user project which weblogic appends to the classpath during server startup
inside weblogic console -
1. first page - provided a data source name and jndi name and selected 'other' for database type
2. second page - selected 'other' for jdbc driver
3. third page - deselected the global transactions
4. fourth page - provided database name, username, host name, port, and password.
5. fifth page - provided driver class, url, database user name and password (didn't bother with the test)
6. Selected target server
I then saved and activated changed and was done.
This what I did for 10.3.6
did the same thing I did for 10.0 before server start up
inside weblogic console -
1. first page - provided data source name and jndi name and selected 'other' for database type
2. second page - selected 'other' for jdbc driver
3. third page - deselected the support global transactions
4. fourth page - here's where things are different - page only asked for database username and password, which I give.
One this page I get a criptic error saying 'errors must be corrected before proceeding' - no other message as to what these errors might be either in the console or the cmd window of the server. I tried making changes to the provider authenticiation of the security realm but no luck. I tried following password creation requirements, I even tried proceeding to the next page without entering anything on this page, all no luck. I have no idea what's going on.
Hope someone can help.
Sam.

I've fixed the class issue but am struggling a bit with SQL Server authentication. I'm running in mixed mode (originally set to Windows authentication but I've modified the security setting), I've enabled TCP/IP and Named Pipes, I've created a user (who I can log in to SQL Server Mgmt Studio successfully with), but still get a connection refused error.
Any insight? Thanks.

What third party drive do I use to connect my umi-7764 to a phytron stepper motor (zss66)

Similar Messages

Maybe you are looking for