What transaction code and entrys we use to post intercompany transactions

hi,
I know obya is used to configure intercompany.
1.can you explain what accounting entrys we post.example?
2.what tcode we use to post the intercompany transaction
3.please any relevant documents can email to [email protected]
thanks
Kiranmayi

we have 2 theories after showing the exception trace to folks who r more adept at managed code.
the first is related to the fact that our 3rd party dlls (I think entity framework is included in these) r older versions. I don't want to discount this theory but we have some evidence already that this might not be true.
I hope I can do justice to the 2nd theory but will make it clearer and clearer as I get a better understanding. I believe this is what Arthur was saying and I applaud his instincts. They explained that .net is so "smart" that it detected
a change in namespace (ie context as Arthur said) and purposely threw an exception 2 save us from ourselves. The workarounds discussed were a bit over my head but I will continue trying to better understand it. The fact that many of the methods
we call after reflection r now merged into one assembly seemed relevant to the discussion and possible workarounds.
this link came up in their discussion and I believe the bottom line here is that by qualifying assembly names further (in config?)r, a workaround is possible.
http://msdn.microsoft.com/en-us/library/system.type.assemblyqualifiedname(v=vs.110).aspx .
This link came up as well and has something to do with ILMerge and workarounds to ILMerge.
http://elegantcode.com/2011/04/02/dynamically-load-embedded-assemblies-because-ilmerge-appeared-to-be-out/ .
Finally, this link came up and seems to have something to do with embedding your dlls in one assembly without them losing their identity.
http://blogs.msdn.com/b/microsoft_press/archive/2010/02/03/jeffrey-richter-excerpt-2-from-clr-via-c-third-edition.aspx
I'll post more here as we muddle thru this.

Similar Messages

Transaction Codes and BAPIs for Mobile Time And Travel

Hi All,
Please can anyone give me the "Transaction Codes" and "BAPIs" that are needed and used for developing an application for Mobile Time and Travel.?
Please help me out.
Cheers,
Anu.
Message was edited by:
 Anuradha Yandamuri

Hi Anu
Below are the Functional Modules used in the standard MTT application.
RFC's for Time Sheet (MTS)
CATS_MY_GET_MASTER_DATA
CATS_MY_GET_PICKLIST_FIELDS
CATS_MY_GET_REJECTION_REASONS
CATS_MY_GET_TEXT_ELEMENTS
CATS_MY_GET_TIME_DATA
CATS_MY_GET_BOOTSTRAP
CATS_MY_GET_CUSTOMIZING_DATA
TT_GET_PICKLIST
RFC's for Travel Expenses (MTR)
WAF_TRIP_ADD_RECEIPT
WAF_TRIP_CHANGE_RECEIPT
WAF_TRIP_CREATE
WAF_TRIP_DELETE_RECEIPT
WAF_TRIP_GET
WAF_TRIP_GET_CREDIT_CARD_ITEMS
WAF_TRIP_GET_CUSTOMIZING
WAF_TRIP_GET_DELETED_LIST
WAF_TRIP_GET_LIST
WAF_TRIP_MODIFY
WAF_TRIP_PROCESS_RECEIPT
WAF_TRIP_RESULTS
Hope this helps
Thanks
Raj

STAD - get the 'transaction code' and 'program name'

Hi, I was wondering if someone knows about a bapi with which I can get only the "transaction code" and "program name".
I need to get those for a specified user, but I don't want to set on a trace, that's why I'd like to use the transaction STAD.
If anyone can help, thanks in advance
Grtz,
Dragovian

ok, so I go like this
TYPE-POOLS sapwl .
DATA: all_stats        TYPE sapwl_allstats.
CALL FUNCTION 'SAPWL_READ_STATISTIC_FILES'
   EXPORTING
     read_client                 = '*'
     read_time                   = '200000'
     read_start_date             = sy-datum
     read_start_time             = '000000'
     read_username               = sy-uname
     read_workprocess            = 'FFFF'
     wait_factor                 = 150
    CHANGING
      all_stats                   = all_stats
how'd I get "start-time" "report-name" "date" "username"?

MTT Transaction codes and BAPIs needed

Hi All,
Please can anyone give me the Transaction Codes and BAPIs that are needed and used for developing an application for Mobile Time and Travel.?
Please help me out.
Cheers,
Anu.

Hi Anu
Below are the Functional Modules used in the standard MTT application.
RFC's for Time Sheet (MTS)
CATS_MY_GET_MASTER_DATA
CATS_MY_GET_PICKLIST_FIELDS
CATS_MY_GET_REJECTION_REASONS
CATS_MY_GET_TEXT_ELEMENTS
CATS_MY_GET_TIME_DATA
CATS_MY_GET_BOOTSTRAP
CATS_MY_GET_CUSTOMIZING_DATA
TT_GET_PICKLIST
RFC's for Travel Expenses (MTR)
WAF_TRIP_ADD_RECEIPT
WAF_TRIP_CHANGE_RECEIPT
WAF_TRIP_CREATE
WAF_TRIP_DELETE_RECEIPT
WAF_TRIP_GET
WAF_TRIP_GET_CREDIT_CARD_ITEMS
WAF_TRIP_GET_CUSTOMIZING
WAF_TRIP_GET_DELETED_LIST
WAF_TRIP_GET_LIST
WAF_TRIP_MODIFY
WAF_TRIP_PROCESS_RECEIPT
WAF_TRIP_RESULTS
Hope this helps
Thanks
Raj

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
When I am playing a song, the "airplay" button isn't even visible.
I am sure that the apple tv setting is on as well. Is there anything else you can help me with?

Important transaction codes and guidelines ...

Hi to all
Please tell me what are the things that a person should keep in mind while working in realtime servers.
What are the transaction codes , programs which are most commonly used.
Please send me as I have newly joined a company.
Thanks ...

Hi
may be this can help..
BASIS/ABAP
SEARCH_SAP_MENU      Show the menu path to use to execute a given tcode. You can search by transaction code or menu text.
DI02      ABAP/4 Repository Information System: Tables.
LSMW      Legacy System Migration Workbench. An addon available from SAP that can make data converstion a lot easier. Thanks to Serge Desland for this one.
OSS1      SAP Online Service System
OY19      Compare Tables
SM13      Update monitor. Will show update tasks status. Very useful to determine why an update failed.
S001      ABAP Development Workbench
S001      ABAP/4 Development Weorkbench. (from [email protected])
S002      System Administration. (from [email protected])
SA38      Execute a program. (from [email protected])
SCAT      Computer Aided Test Tool
SCU0      Compare Tables
SE01      Old Transport & Corrections screen
SE03      Groups together most of the tools that you need for doing transports. In total, more than 20 tools can be reached from this one transaction.
SE09      Workbench Organizer
SE10      New Transport & Correction screen
SE11      ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE12      Dictionary: Initial Screen - enter object name. (from [email protected])
SE13      Access tables in ABAP/4 Dictionary. (from [email protected])
SE14      Utilities for Dictionary Tables
SE15      ABAP/4 Repository Information System
SE16      Data Browser: Initial Screen. (from [email protected])
SE16N      Table Browser (the N stands for New, it replaces SE16). Provided by Smijo Mathew.
SE17      General Table Display
SE24      Class Builder
SE30      ABAP/4 Runtime Analysis
SE32      ABAP/4 Text Element Maintenance
SE35      ABAP/4 Dialog Modules
SE36      ABAP/4: Logical Databases
SE37      ABAP/4 Function Modules
SE38      ABAP Editor
SE39      Splitscreen Editor: Program Compare
SE41      Menu Painter
SE43      Maintain Area Menu
SE48      Show program call hierarchy. Very useful to see the overall structure of a program. Thanks to Isabelle Arickx for this tcode.
SE49      Table manipulation. Show what tables are behind a transaction code. Thanks to Isabelle Arickx for this tcode.
SE51      Screen Painter: Initial Screen. (from [email protected])
SE54      Generate View Maintenance Module
SE61      R/3 Documentation
SE62      Industry utilities
SE63      Translation
SE64      Terminology
SE65      R/3 document. short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68      Translation Administration
SE71      SAPscript layout set
SE71      SAPScript Layouts Create/Change
SE72      SAPscript styles
SE73      SAPscript font maintenance (revised)
SE74      SAPscript format conversion
SE75      SAPscript Settings
SE76      SAPscript Translation Layout Sets
SE77      SAPscript Translation Styles
SE80      ABAP/4 Development Workbench
SE81      SAP Application Hierarchy
SE82      Customer Application Hierarchy
SE83      Reuse Library. Provided by Smiho Mathew.
SE84      ABAP/4 Repository Information System
SE85      ABAP/4 Dictionary Information System
SE86      ABAP/4 Repository Information System
SE87      Data Modeler Information System
SE88      Development Coordination Info System
SE91      Maintain Messages
SE92      Maintain system log messages
SE93      Maintain Transaction. (from [email protected])
SEARCH_SAP_MENU      From the SAP Easy Access screen, type it in the command field and you will be able to search the standard SAP menu for transaction codes / keywords. It will return the nodes to follow for you.
SEU      Object Browser
SHD0      Transaction variant maintenance
SM04      Overview of Users (cancel/delete sessions)
SM12      Lock table entries (unlock locked tables)
SM21      View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30      Maintain Table Views. (from [email protected])
SM31      Table Maintenance
SM32      Table maintenance
SM33     Display Table Parameter ID TAB
SM35      View Batch Input Sessions
SM37      View background jobs
SM50      Process Overview. (from [email protected])
SM51      Delete jobs from system (BDC)
SM62      Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN      Display the menu path to get to a transaction
SMOD      Transactions for processing/editing/activating new customer enhancements.
CMOD      Transactions for processing/editing/activating new customer enhancements.
SNRO      Object browser for number range maintenance. (from [email protected])
SPRO      Start SAP IMG (Implementation Guide). (from [email protected])
SQ00      ABAP/4 Query: Start Queries
SQ01      ABAP/4 Query: Maintain Queries
SQ02      ABAP/4 Query: Maintain Funct. Areas
SQ03      ABAP/4 Query: Maintain User Groups
SQ07      ABAP/4 Query: Language Comparison
ST05      Trace SQL Database Requests. (from [email protected])
ST22      ABAP Dump analysis
SU53      Display Authorization Values for User. (from [email protected])
PFCG     Role maintenance
SU21     List of object classes
WEDI      EDI Menu. IDOC and EDI base.
WE02      Display an IDOC
WE07      IDOC Statistics
Cheers
VJ

What is "netfront" and when to use it (or not)?

Just wondering and the Xen FAQ is not giving a satisfying answer: what does "type=netfront" in vm.cfg (regarding the vif) stand for and when do I have to use it (or not)?
Is it really needed? Under what circumstances? And only for specific types of virtual machines (HVM / PV)? Etcetera.
Please enlighten us if you know. TIA!

If the virtual machine is a hardware virtualized machine (fully virtualized), you can configure the virtual interface (VIF) type to be either ioemu or netfront.
The netfront driver is a paravirtualized driver which can be used with a paravirtualized machine, or with a hardware virtualized machine. The ioemu driver is a hardware virtualized driver, and can only be used with a hardware virtualized machine. Both drivers contain the BIOS and device emulation code to support hardware virtualized machines.
For hardware virtualized machines, the default is ioemu. For paravirtualized machines, the default is netfront.
After you configure the virtual interface type for one network interface card, all the network interface cards in the virtual machine will be set to the same type.

VPN. What's this and how to use it?

Hello,
Recently I started to work from home and not the office. To connect to my work server my company's sysadmin sent me the requisites to connect to VPN (I need to ssh to my work server but it's allowed to the limited set of IPs). But I have no idea what to do next. How to set up the connection and how to use it?
Thanks

Thanks! I've tried to follow the steps described in the wiki article but unfortunately stucked on 'Making Your Connection' section:
# pon tunnel debug dump logfd 2 nodetach
pppd options in effect:
debug # (from command line)
nodetach # (from command line)
logfd 2 # (from command line)
dump # (from command line)
noauth # (from /etc/ppp/options.pptp)
refuse-pap # (from /etc/ppp/options.pptp)
refuse-chap # (from /etc/ppp/options.pptp)
refuse-mschap # (from /etc/ppp/options.pptp)
refuse-eap # (from /etc/ppp/options.pptp)
name pshevtsov # (from /etc/ppp/peers/tunnel)
remotename PPTP # (from /etc/ppp/peers/tunnel)
# (from /etc/ppp/options.pptp)
pty pptp xx.xx.xx.xx --nolaunchpppd # (from /etc/ppp/peers/tunnel)
crtscts # (from /etc/ppp/options)
# (from /etc/ppp/options)
asyncmap 0 # (from /etc/ppp/options)
lcp-echo-failure 4 # (from /etc/ppp/options)
lcp-echo-interval 30 # (from /etc/ppp/options)
hide-password # (from /etc/ppp/options)
ipparam tunnel # (from /etc/ppp/peers/tunnel)
proxyarp # (from /etc/ppp/options)
nobsdcomp # (from /etc/ppp/options.pptp)
nodeflate # (from /etc/ppp/options.pptp)
require-mppe-128 # (from /etc/ppp/peers/tunnel)
noipx # (from /etc/ppp/options)
using channel 28
Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
Script pptp xx.xx.xx.xx --nolaunchpppd finished (pid 26089), status = 0x0
Modem hangup
Connection terminated.
I don't know what to do

On-The-Go Playlist: what is it and how to use?

I've read the notice on the iPod when you select the On-the-Go playlist but don't know what it does and how to best use it. I've tried to add a song to it by holding down the center button while the song was playing but don't know how to check to see if it's been added. When I go to the On-the-Go playlist in the menu I only get the text instructions. Can someone describe how to add, and remove, songs from it or tell me if you can and how to use it?
OT

EDIT: BAH! I posted too slow... but there is still some information about saving and clearing in there
Its for making a playlist while your 'on the go'. So you click and hold the middle button the selected song (or album) should flash... Then you go into the playlist menu (music>playlists>on-the-go) and use it like any normal playlist...
When there's songs on the playlist it gives you the option to save or clear at the end of the song list, you select either one and it'll ask for conformation.
It works in both manually sync and auto sync mode. But if you have it on auto sync the play list will be created in iTunes...
So I'm not sure why you don't see songs in it after yo assign them to it, try sending a whole album and then music>playlists>on-the-go the album songs should be listed.
As for reasons to use it well maybe while out and about you realise that you want to hear from two artists at the same time, Radiohead and Bowie, in a shuffle mode. You could make it a on-the-go playlist. Or there's a few podcasts you want to hear in order... so you go down the list and assign them to on-the-go.
Some people use the On the go to note songs that need to be looked at in iTunes later, maybe because its too quiet, badly imported or they don't understand how such a bad song found its way onto the iPod.
Once you save it if you try and put more songs to it, 'on-the-go-1' will be created.
-hope this helps

Bank Transaction Codes and Transaction Type Codes in Cash Management

Hi All,
Can someone please let me know to which field we should populate the Bank Transaction Code in the ce_statement_lines_interface table.
Is it TRX_CODE column ?
The problem i'm having is actually the default BAI2 mapping doesn't populate the bank transaction codes to this fild (TRX_CODE) when I try to upload the file generated by our bank.Insdead those are populated in the CUSTOMER_TEXT column.
The values populated in the TRX_CODE are the values to indicate whether its a credit entry or a debit entry ( “399” for credit transactions or “699” for debit transactions).
Please let me know where these 399 and 699 should be populated in the interface table as well?
Thanks and Regards,
MPH

Check your BAI mapping with statement data file. As far as I know (16,1) is the right line level mapping for trx code.

What is PKCS7 and how to use it?

Hi! I'm in a project in which I must send a file encrypted with a key that is also encrypted with a public key, the receiver must decrypt the key using his(her) private key, and then, using that decrypted key to in turn decrypt the file.
I've been told to use PKCS7 standard, but is not clear for me how it works, and how to use it. I use bouncycastle, and know that it has APIs to do something like this.
Any light will be greatly appreciated!

Look at the CMS functionality in the bouncycastle provider, in the bcmail distro. You can find some examples in the bcmail distro also. Maybe I'll post an example later.

What is WebAppsContext and where we used it?

HI
Please guide me on
What is WebAppsContext and whats its application Usage?
Thanx

Yes you are right
See my previous reply....
When the user logs in to an OA Framework application, the OA Framework creates an AOL/J oracle.apps.fnd.comon.WebAppsContext object and a browser sessionbased cookie that together keep track of key Oracle Applications context information like the current responsibility, organization id and various user attributes (user name, user id, employee id and so on). The Oracle Applications user session is associated with a servlet session, however, it has its own life cycle and time-out characteristics.Thanks
--Anil

Hi, all transactions codes are saved in which table?some transaction codes?

hi,
all transactions codes are saved in which table?i want some transaction codes?

All transaction codes are stored in table TSTC. Their texts are displayed in TSTCT.
Here are some T-CODE's..
OSS1      SAP Online Service System
OY19      Compare Tables
S001      ABAP Development Workbench
S002      System Administration.
SA38      Execute a program.
SCAT      Computer Aided Test Tool
SCU0      Compare Tables
SE01      Old Transport & Corrections screen
SE09      Workbench Organizer
SE10      Customizing Organizer
SE10      Customizing organizer requests for user (To release for transport enter user name, press Enter. Select changed object and select ReleaseSE10 New Transport & Correction screen
SE11      ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE11      ABAP/4 Dictionary.
SE12      Dictionary: Initial Screen enter object name
SE13      Access tables in ABAP/4 Dictionary.
SE14      ABAP/4 Dictionary: Database Utility.
SE14      Utilities for Dictionary Tables
SE15      ABAP/4 Repository Information System
SE15      ABAP/4 Repository Information System.
SE16      Data Browser
SE16      Data Browser: Initial Screen.
SE16      Display table contents
SE17      General Table Display
SE30      ABAP/4 Runtime Analysis
SE30      ABAP/4 Runtime Analysis: Initial Screen.
SE30      Run Time Analysis (press Tips and Tricks button for good stuff)
SE32      ABAP/4 Text Element Maintenance
SE35      ABAP/4 Dialog Modules
SE36      ABAP/4: Logical Databases
SE37      ABAP/4 Function Library.
SE37      ABAP/4 Function Modules
SE38      ABAP Editor
SE38      ABAP/4 Editor.
SE38      ABAP/4 Program Development
SE39      Splitscreen Editor: Program Compare
SE41      Menu Painter
SE43      Maintain Area Menu
SE51      Screen Painter
SE51      Screen Painter: Initial Screen.
SE54      Generate View Maintenance Module
SE61      R/3 Documentation
SE62      Industry utilities
SE63      Translate Short/Long Text.
SE63      Translation
SE64      Terminology
SE65      R/3 documents. Short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68      Translation Administration
SE71      SAPscript layout set
SE71      SAPscript Layouts Create/Change
SE72      SAPscript styles
SE73      SAPscript font maintenance (revised)
SE74      SAPscript format conversion
SE75      SAPscript Settings
SE76      SAPscript Translation Layout Sets
SE77      SAPscript Translation Styles
SE80      ABAP/4 Development Workbench
SE80      Repository Browser: Initial Screen.
SE81      SAP Application Hierarchy
SE82      Customer Application Hierarchy
SE84      ABAP/4 Repository Information System
SE85      ABAP/4 Dictionary Information System
SE86      ABAP/4 Repository Information System
SE87      Data Modeler Information System
SE88      Development Coordination Info System
SE91      Maintain Messages
SE92      Maintain system log messages
SE93      Maintain Transaction Codes
SE93      Maintain Transaction.
SEU      Object Browser
SHD0      Transaction variant maintenance
SM04      Overview of Users (cancel/delete sessions)
SM04      Overview of Users.
SM12      Deletion of lock entries (in the event you have you are locked out).
SM12      Lock table entries (unlock locked tables)
SM21      View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30      Maintain Table Views.
SM31      Table Maintenance
SM32      Table maintenance
SM35      View Batch Input Sessions
SM37      View background jobs
SM50      Process Overview.
SM51      Delete jobs from system (BDC)
SM62      Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN      Display the menu path to get to a transaction
SMOD/CMOD      Transactions for processing/editing/activating new customer enhancements.
SNRO      Object browser for number range maintenance.
SPRO      Start SAP IMG (Implementation Guide).
SQ00      ABAP/4 Query: Start Queries
SQ01      ABAP/4 Query: Maintain Queries
SQ02      ABAP/4 Query: Maintain Funct. Areas
SQ03      ABAP/4 Query: Maintain User Groups
SQ07      ABAP/4 Query: Language Comparison
ST05      Trace SQL Database Requests.
SU53      Display Authorization Values for User.
Human Resources
PA03      Change Payroll control record
PA20      Display PA Infotypes
PA30      Create/Change PA Infotypes
PP02      Quick Entry for PD object creation
PU00      Delete PA infotypes for an employee. Will not be able to delete an infotype if there is cluster data assigned to the employee.
Sales and Distribution (SD)
OLSD      Config for SD. Use Tools-Data Transfer-Conditions to setup SAP supplied BDC to load pricing data
VA01      Create Sales/Returns Order Initial Screen
VB21      Transaction for Volume Lease Purchases (done as a sales deal)
VK15      Transaction used to enter multiple sales conditions (most will be entered here)
VL02      Deliveries
SAP Office
SO00      send a note through SAP, can be sent to Internet, X400, etc
Financial Accounting (FI)
FGRP      Report Writer screen
FM12      View blocked documents by user
FST2      Insert language specific name for G/L account.
FST3      Display G/L account name.
KEA0      Maintain operating concern.
KEKE      Activate CO-PA.
KEKK      Assign operating concern.
KL04      Delete activity type.
KS04      Delete a cost centre.
KSH2      Change cost centre group delete.
OBR2      Deletion program for customers, vendors, G/L accounts.
OKC5      Cost element/cost element group deletion.
OKE1      Delete transaction data.
OKE2      Delete a profit centre.
OKI1      Determine Activity Number: Activity Types (Assignment of material number/service to activity type)
OMZ1      Definition of partner roles.
OMZ2      Language dependent key reassignment for partner roles.
Material Management (MM)
MM06      Flag material for deletion.
OLMS      materials management configuration menu, most of the stuff under this menu is not under the implementation guide
MM configuration transactions
OLMB      Inventory management/Physical Inventory
OLMD      MM Consumption-Based Planning
OLME      MM Purchasing
OLML      Warehouse Management
OLMR      Invoice Verification
OLMS      Material Master data
OLMW      MM Valuation/Account Assignment
Configuration related
OLE      OLE demo transaction
OLI0      C Plant Maintenance Master Data
OLI1      Set Up INVCO for Material Movements
OLI8      Set Up SIS for Deliveries
OLIA      C Maintenance Processing
OLIP      C Plant Maintenance Planning
OLIQ      New set-up of QM info system
OLIX      Set Up Copying/Deleting of Versions
OLIY      Set Up Deletion of SIS/Inter.Storage
OLIZ      Stat Set Up INVCO: Invoice Verify
OLM2      Customizing: Volume-Based Rebates
OLMB      C RM-MAT Inventory Management Menu
OLMD      C RM-MAT MRP Menu
OLME      C MM Menu: Purchasing
OLML      C MM Menu for Warehouse Management
OLMR      C RM-MAT Menu: Invoice Verification
OLMS      C RM-MAT Master Data Menu
OLMW      C RM-MAT Valuation/Acct. Asset. Menu
OLPA      SOP Configuration
OLPE      Sales order value
OLPF      SPRO Start SAP IMG (Implementation Guide).
OLPK      Customizing for capacity planning
OLPR      Project System Options
OLPS      Customizing Basic Data
OLPV      Customizing: Std. Value Calculation
OLQB      C QM QM in Procurement
OLQI      Analysis OLVD C SD Shipping Menu
OLVF      C SD Billing Menu
OLQM      Customizing QM Quality Notifications
OLQS      C QM Menu Basic Data
OLQW      C QM Inspection Management
OLQZ      Quality Certificates
OLS1      Customizing for Rebates
OLSD      Customizing: SD
OLVA      C SD Sales Menu
OLVS      C SD Menu for Master Data
Regards,
Pavan

Using SO_OBJECT_SEND with Transaction code and IDOC number

Hi All - from within the inbound_idoc_orders FM - when an idoc errors I want to generate a sap office document (with more verbage than workflow, so that is why a sap office doc) and with SO_OBJECT_SEND - but I want to be able to pass the idoc number and either Tcode VA01 or FM of inbound_idoc_orders - so that user can usee doc execute menu path and be launched into VA01 with the idoc data...
We do this today with VA01 and the sales order number - here is different in I want to pass the idoc number so that data can be used....
I did this prior but one system referesh flushed the code ... Thanks for the help - Janet

Hi All - from within the inbound_idoc_orders FM - when an idoc errors I want to generate a sap office document (with more verbage than workflow, so that is why a sap office doc) and with SO_OBJECT_SEND - but I want to be able to pass the idoc number and either Tcode VA01 or FM of inbound_idoc_orders - so that user can usee doc execute menu path and be launched into VA01 with the idoc data...
We do this today with VA01 and the sales order number - here is different in I want to pass the idoc number so that data can be used....
I did this prior but one system referesh flushed the code ... Thanks for the help - Janet

What is mdworker and why is using so much of my CPU?

I've read earlier threads in which mdworker is mentioned or discussed but have not found an answer for my question. Actually, one post came close, but it was from a few years ago, and mentioned a tab on Activity Monitor that does not exist on copy.
So, the issue is that periodically my fan starts racing. I'm used to that happening when Time Machine is doing its backups, but recently I've noticed that it's happening even though Time Machine is not running. When I go to the Activity Monitor I see that mdworker is using a very high percentage of my CPU's capacity, way more than any other process.
I gather from scanning posts on earlier threads that mdworker is used by other processes, and that the problem may lie there. But I don't know how to identify the other processes or what to do when I find them.
Help appreciated.
Thanks,
Eric Weir

Mac Medic ([email protected]) wrote:
Click on your Spotlight icon when it's happening. mdworker is a process used for indexing files for Spotlight.
Thanks. Can't see that anything is. However, in connection with another issue I'm having [Mail sends hanging up] I've been monitoring the console. In ~/Library/Logs/Sync/Tags.log I see numerous reports that look like this:
12:52:29: Mail Tags Spotlight Plugin initialized (mdworker)
These are occasionally broken up by more ominous looking records, such as this:
FAILURE: 21:17:15: Error when retrieving tags from path /Users/ericweir/Library/Mail/Mailboxes/1 priority/2 news.mbox/Messages/308064.emlx: Error Domain=NSPOSIXErrorDomain Code=2 UserInfo=0x10018d5e0 "The operation couldn’t be completed. No such file or directory" (mdworker)
And this:
10:34:22: Tags build 2096 started: 2011-05-02 10:34:22 -0400
10:34:22: Spotlight plugin registered!
FAILURE: 10:34:22: The spotlight attribute kMDItemOMUserTags is not registered
FAILURE: 10:34:22: The spotlight attribute kMDItemOMUserTagTime is not registered
10:34:23: Tag Query kMDItemOMUserTags == '*' executed
Tags is a tagging utility I checked out a couple months or so back that I decided not to use. I'm assuming the records in this log have reference to it. I still have the app installed. Might getting rid of it resolve the problem?

What transaction code and entrys we use to post intercompany transactions

Similar Messages

Maybe you are looking for