What type of access does a PnP user need?

I'm looking to a create a user to be able to deploy the 0 day bootstrap config todevices using iphone/ipad what type of access does the user need?
Thank you

Very tiny ones except, possibly, two. You will need to make a Genius Appointment and take it in to see if they can provide or order the screws for you. You can also check with ifixit.com.

Similar Messages

  • What type of delta does LO run ?

    Hi.. I understand that in COPA extraction there are no migration steps involved as it runs on "time stamp delta". If that is the case then please let me know what type of delta does LO and LIS run... If even LO and LIS run on time stamp then please let me know why are there no migration steps involved in COPA...?

    Logistic's Area use's three Types of Delta Mechanism's :
    1. Direct Delta
    2. Queued Delta
    3. Un-serialized V3 Update
    These are different work processes on the application server that takes the update LUW (which may have various DB manipulation SQLs) from the running program and execute it. These are separated to optimize transaction processing capabilities.
    Taking an example -
    If you create/change a purchase order (me21n/me22n), when you press 'SAVE' and see a success message (PO.... changed..), the update to underlying tables EKKO/EKPO has happened (before you saw the message). This update was executed in the V1 work process.
    There are some statistics collecting tables in the system which can capture data for reporting. For example, LIS table S012 stores purchasing data (it is the same data as EKKO/EKPO stored redundantly, but in a different structure to optimize reporting). Now, these tables are updated with the txn you just posted, in a V2 process. Depending on system load, this may happen a few seconds later (after you saw the success message). You can see V1/V2/V3 queues in SM12 or SM13.
    In a local update, the update program is run by the same work process that processed the request. The dialog user has to wait for the update to finish before entering further data. This kind of update is useful when you want to reduce the amount of access to the database. The disadvantage of local updates is their parallel nature. The updates can be processed by many different work processes, unlike asynchronous or synchronous update, where the update is serialized due to the fact that there are fewer update work processes (and maybe only one).

  • Need a query to  determine what type of access an account have in ERP

    Need a code to check what type of access an account (username) and its responsibilities have in ERP - Is it Inquiry only or it have update access and/or ability to run concurrent jobs.
    It means
    A column (Has Update Capabilities?) should be placed in a report where there are different columns containing Form Name etc.
    It should display like below
    Update Capabilities --> Put Yes in this field
    No Update Capabilities --> Put No in this field
    Job Scheduling Capabilities --> Put 'Yes - Job Scheduling'
    Thanks in Advance.

    What I mean is,
    Where can I know the update capabilities for a Form or a function
    I was asked by my manager to make a report to input the UserName so that the output displays the UserNmae and its associated Responsibilities and the Menu prompts registered with the responsibility(Tree Structure) and the User Form Name and User Function Name and the Update Capabilities.
    For the Update Capabilities I have to display 'Yes' if the form/function has update capabilities or not.
    And have to check whether it has Job Scheduling Capabilities or not.
    For this (Update Capabilities), which tables I have to refer?
    Thanks.

  • What type of ram does the MacBook Pro 15" use?

    What type of ram does the MacBook Pro 15" use? Is it the same as the 13"?

    13 and 15-inch MacBooks Pro use the same RAM type, but it depends on the model. See > http://support.apple.com/kb/ht1270

  • What type of hard drive enclosure do I need for my old hard drive?

    What type of hard drive enclosure do I need for the hard drive from my old macbook pro?  The graphics card doesn't work on the old laptop and there were some files that were not on my last backup that I transferred to the new macbook pro.

    Check eBay. Any 2.5" USB SATA HDD enclosure.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • What type of compression does the new version of QT use?

    I just opened a 1080p video shot with a AVCHD camera, did a basic trim and exported at 1080p.
    What type of compression is the version of QT that comes with Mavericks applying to the video? Is it heavily compressed?
    Thanks.

    Hi Jasper and welcome to Discussions,
    iMac Computers (August 2007)
    The iMac Computers introduced in August 2007, based on the Intel Core 2 Duo microprocessor, provide two RAM slots that accommodate 200-pin DDR2 SDRAM SO-DIMMs up to 1.25” in height. The SO-DIMMs must be DDR2-667 (PC2-5300) compliant and must be unbuffered, unregistered, 8-byte, nonparity, and non-ECC.
    The iMac ships with one 1 GB, 667 MHz, SDRAM SO-DIMMs installed, for a total of 1 GB. The largest capacity SO-DIMM supported is 2 GB, for a total maximum of 4 GB.
    Memory configure-to-order options are: two 1 GB DIMMs for a total of 2 GB or two 2 GB DIMM for a total of 4 GB.
    The memory controller supports 1 GB and 2 GB SO-DIMMs; other configurations are untested. Because the memory in the two slots is configured as a contiguous array of memory, when both SO-DIMMs are the same size and type, the interleaving function is able to improve performance.
    The iMac supports a CAS latency of 5.
    The width of each 667 MHz memory bus is 64 bits.
    The maximum number of devices per SO-DIMM is 16.
    Regards
    Stefan

  • What level of Access do BOE admin's need?

    Hi,
    I'm about to install Business Objects Enterprise 3.1 on a new server (vmware). I'm going to then link that up with a VWware database server which contains the oracle database, migrate over the basic universe, reports, instance, users, folders etc.
    Moving forward I will be running and validating xcelsius dashboards one by one and migrating them over to the server.
    In applying for Administrative access to the server, I need to justify the business need to have that level of access (admin). Otherwise I will just get an install account. Other than stopping and restarting the SIA in the CCM, are there any other reasons that justify my having an Administrator account to the server that BOE sits on to perform the day to day functions of a boe admin?
    thanks....

    Dear,
    I understand after installation steps, a administratiob acoime os not necessary for activities daily.
    Just with Bo administrator account you should do alo activities about BO maintanance.
    Regard,
    Edinaldo Junior

  • What type of HDD does MS-6382 support?

    Hi,
    My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of  120 GB"
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
    I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
    I would be grateful for any help anyone can give!
    Here is some info on my current HDD:
    HD Tune: ST380020A Information
    Firmware version : 3.39
    Serial number    : 5GC0KMYD
    Capacity         : 73.1 GB (~78.5 GB)
    Buffer size      : 2048 KB
    Standard         : ATA/ATAPI-6
    Supported mode   : UDMA Mode 5 (Ultra ATA/100)
    Current mode     : UDMA Mode 5 (Ultra ATA/100)
    S.M.A.R.T                    : yes
    48-bit Address               : no
    Read Look-Ahead              : yes
    Write Cache                  : yes
    Host Protected Area          : yes
    Device Configuration Overlay : yes
    Automatic Acoustic Managment : yes
    Power Managment              : yes
    Advanced Power Managment     : yes
    Power-up in Standby          : no
    Security Mode                : yes
    Firmware Upgradable          : yes
    Partition     : 1
    Drive letter  : C:\
    Label         : MR01-G4
    Capacity      : 74822 MB
    Usage         : 17.54%
    Type          : FAT32
    Bootable      : Yes
    Jorolat

    Quote from: Wonkanoby on 19-June-05, 21:26:02
    ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
    the drive will run at about half that speed once the cache is cleared
    dont worry about it
    Er, I got another question
    I'm now looking at this hitachi model:
    http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
    which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
    The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
    http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
    but I thought I'ld ask before I order it or in case I change my mind (again).
    Thankyou for your help
    Jorolat

  • What type of calendars does bc offer?

    We are looking for a calendar for our website.  The one we currently use is not working for us.  We want one that will link to pages that host events and also a running calendar of what is happening in our organization.  Any suggestions?

    Hi Jasper and welcome to Discussions,
    iMac Computers (August 2007)
    The iMac Computers introduced in August 2007, based on the Intel Core 2 Duo microprocessor, provide two RAM slots that accommodate 200-pin DDR2 SDRAM SO-DIMMs up to 1.25” in height. The SO-DIMMs must be DDR2-667 (PC2-5300) compliant and must be unbuffered, unregistered, 8-byte, nonparity, and non-ECC.
    The iMac ships with one 1 GB, 667 MHz, SDRAM SO-DIMMs installed, for a total of 1 GB. The largest capacity SO-DIMM supported is 2 GB, for a total maximum of 4 GB.
    Memory configure-to-order options are: two 1 GB DIMMs for a total of 2 GB or two 2 GB DIMM for a total of 4 GB.
    The memory controller supports 1 GB and 2 GB SO-DIMMs; other configurations are untested. Because the memory in the two slots is configured as a contiguous array of memory, when both SO-DIMMs are the same size and type, the interleaving function is able to improve performance.
    The iMac supports a CAS latency of 5.
    The width of each 667 MHz memory bus is 64 bits.
    The maximum number of devices per SO-DIMM is 16.
    Regards
    Stefan

  • ODI access- what type of access do i need to be able to run oracle commands

    All Guru's
    I have modifies KM to be able to run a sql script using sqlplus. i made sure it runs OK in jython from command line D:\jython2.5.1>jython TEST_SQLPLUS_JYTHON.py. Please find the script below which fails when i execute in the studio using admin and does not populate the E:\ODI_file\TEST_SQL.log.
    fyi.. I have also created SUPERVISOR id and gave admin access just to make sure I am covered from ODI.
    please help.
    import java.lang.String
    import java.lang.Runtime as Runtime
    from jarray import array
    import java.io.File
    import os
    import re
    output_write=open('E:\ODI_file\TEST_SQL_LOG.log','w')
    retVal = os.system(r'D:\oracle\product\11.2.0\client_1\BIN\sqlplus mdm_stage/xxxxxx@d1odi1 @E:\ODI_FILE\TEST.sql > E:\ODI_file\TEST_SQL.log')
    if retVal >= 1:
    print retVal
    str1 = 'SQLPLUS failed. Please check the for details '
    else:
    print retVal
    str1 = 'SQLPLUS SUCCESSFULL'
    output_write.write(str1)
    output_write.close()

    Hi amy6cole3,
    You can download the HP iPrint 3.0 app from your apps market. Once this is downloaded, you can open the app, select the item to print, and touch print.
    Here is a helpful link to help you with setting up HP iPrint 3.0.  
     http://www.hp.com/global/us/en/consumer/digital_photography/free/software/iprint-photo.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • What type of glass does the Iphone 6 have ?

    Does the Iphone 6 have Gorilla Glass or a different type of glass ? please let me know ASAP

    latest version of "Gorilla Glass" from Corning. Why is this needed ASAP?

  • What type of file does IMovie Read?

    I am getting really frustrated with this, i have .mpg that play perfectly in quicktime, but cant seem to be imported in IMovie, so my guess is that i have to convert it into another type of file, but what file and what program should i use to convert it and then from there how do i import it, PLEASE HELP ME!!!!!!!!!

    How can I edit MPEG or convert DVD or MPEG to DV
    http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
    Using MPEG or DVD footage
    http://www.danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    MPEG Streamclip
    http://www.alfanet.it/squared5/mpegstreamclip.html
    MPEG-2 Playback
    http://www.apple.com/quicktime/mpeg2/
    Sue

  • What type of deinterlacing does Apple use when exporting interlaced to QTM

    There are many different ways to deinterlace video so I wonder which of them apple uses in QT Pro when you want to export to a QT movie.
    For those who don't know what I'm talking about it concerns video that has been recorded for playback on a TV and each frame only holds half the information and needs to be meshed together or one of several techniques for it to play back on your computer monitor without leaving artifacts or horizontal lines around the edges of moving objects. No technique so far is perfect and I wonder which one apple chose because it doesn't give you any information on it.
    Thanks
    Kevin

    The metal skin is really glued around the edge by a plastic frame. It is this frame that holds the skin to the main frame and can give problems.
    I had to open my ti case to install an airport card. I either did it wrong or the apple glue job was poor because the gray plastic trim around the edge of the metal skin had come loose over 50% of the circumference.
    I had a commercial 3M rubber cement on hand so I used that. I applied it with a toothpick very sparingly (of course the rubber cement gets stringy so the job was a ittle messy).
    I let dry in a warm room for 24 hours. The reason I did that was fumes from curing glue can be caustic and attack some very thin metals etc. I fugured I wanted to lose any fumes before I trapped them in the warm computer.
    It worked well and I haven't had a repeat of the problem.

  • What types of skills does Adobe prmote?

    Hello all,
    I am after a huge favour and would appreciate greatly if anyone can help me with this problem....
    I am a trainee High school teacher and I am currently writing an essay on how ICT can motivate and aid learning skills; and I am currently talking about a section of my essay on Adobe products. What I'm after is perhaps links that touch on Adobe aiding students in these areas: understanding, analysis, problem-solving, collaborative, autonomy, and evaluation.
    Many thanks folks!
    Steven

    Sorry, Steven.  I still find your approach lacks direction.  Your question remains overly broad and vague.
    Photoshop is a professional level application for working professionals, not a learning development tool for students.  It makes no apologies for it's long and steep learning curve.  Certainly learning Photoshop can be a lifetime endeavor.
    This is indeed the Photoshop forum, but that doesn't mean folks here are necessarily familiar with Flash and/or Dreamweaver.  I for one, never go anywhere remotely near the latter two applications.
    As far as the "creative suites", be advised that they are but a figment of the imagination of the marketing folks at Adobe.  As has been often stated (mostly by me but also by others ), the individual point-applications  engineering teams are not only not in the same building but even in different cities, different states of the American Union and, in some cases, different countries and different continents. 
    They clearly do not work together very often nor very well, and they communicate as little as imaginable among themselves—as evidenced by suggestions made on the forums by Adobe engineers to "let the other teams know" that there are real problems that interfere with the other applications and with our work.
    Certainly any student learning Photoshop will be faced with a gazillion problems he or she has to understand, analyze and solve.  But those are skills that are required to learn the application, not something to be magically acquired by tackling the application, although, as Noel says, those skills will certainly be honed in the process.
    Having been married to a brilliant educator and school administrator for over four decades, I fully understand and admire your efforts in the area, though.

  • What type of warranty does a laptop computer come with at best buy

    My computer crashed few months into buy

    They normally come with a 1 year warranty but however they only cover normal hardware failures. Meaning if it is physically damaged, viruses/software only they will not cover those types of repairs. For example if it is a bad hard drive that is causing the unit not to load windows or run properly that would be covered. Your best bet is if you can back up your data and bring it to your local Geek Squad along with the proof of purchase if you did not purchase any optional coverage.

Maybe you are looking for