What type of HDD does MS-6382 support?

Hi,
My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of 120 GB"
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
I would be grateful for any help anyone can give!
Here is some info on my current HDD:
HD Tune: ST380020A Information
Firmware version : 3.39
Serial number : 5GC0KMYD
Capacity : 73.1 GB (~78.5 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-6
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : no
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Managment : yes
Power Managment : yes
Advanced Power Managment : yes
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : C:\
Label : MR01-G4
Capacity : 74822 MB
Usage : 17.54%
Type : FAT32
Bootable : Yes
Jorolat

Quote from: Wonkanoby on 19-June-05, 21:26:02
ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
the drive will run at about half that speed once the cache is cleared
dont worry about it
Er, I got another question
I'm now looking at this hitachi model:
http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
but I thought I'ld ask before I order it or in case I change my mind (again).
Thankyou for your help
Jorolat

Similar Messages

What type of ram does the MacBook Pro 15" use?

What type of ram does the MacBook Pro 15" use? Is it the same as the 13"?

13 and 15-inch MacBooks Pro use the same RAM type, but it depends on the model. See > http://support.apple.com/kb/ht1270

What type of server is best to support my apple devices

What type of server is best to support my apple devices

This is the best solution
http://www.macworld.com/article/164388/2011/12/mac_mini_with_lion_server_ideal_f or_soho_and_smb.html
support for email server push for iPhone, iPad, address book server, wiki etc.

What type of delta does LO run ?

Hi.. I understand that in COPA extraction there are no migration steps involved as it runs on "time stamp delta". If that is the case then please let me know what type of delta does LO and LIS run... If even LO and LIS run on time stamp then please let me know why are there no migration steps involved in COPA...?

Logistic's Area use's three Types of Delta Mechanism's :
1. Direct Delta
2. Queued Delta
3. Un-serialized V3 Update
These are different work processes on the application server that takes the update LUW (which may have various DB manipulation SQLs) from the running program and execute it. These are separated to optimize transaction processing capabilities.
Taking an example -
If you create/change a purchase order (me21n/me22n), when you press 'SAVE' and see a success message (PO.... changed..), the update to underlying tables EKKO/EKPO has happened (before you saw the message). This update was executed in the V1 work process.
There are some statistics collecting tables in the system which can capture data for reporting. For example, LIS table S012 stores purchasing data (it is the same data as EKKO/EKPO stored redundantly, but in a different structure to optimize reporting). Now, these tables are updated with the txn you just posted, in a V2 process. Depending on system load, this may happen a few seconds later (after you saw the success message). You can see V1/V2/V3 queues in SM12 or SM13.
In a local update, the update program is run by the same work process that processed the request. The dialog user has to wait for the update to finish before entering further data. This kind of update is useful when you want to reduce the amount of access to the database. The disadvantage of local updates is their parallel nature. The updates can be processed by many different work processes, unlike asynchronous or synchronous update, where the update is serialized due to the fact that there are fewer update work processes (and maybe only one).

What type of access does a PnP user need?

I'm looking to a create a user to be able to deploy the 0 day bootstrap config todevices using iphone/ipad what type of access does the user need?
Thank you

Very tiny ones except, possibly, two. You will need to make a Genius Appointment and take it in to see if they can provide or order the screws for you. You can also check with ifixit.com.

What type of image files can java support?

I there I'm trying to figure out what type of image formats does java support. Am I right in thinkning that it only supports:
BMP
JPEG
GIF
TIFF

I there I'm trying to figure out what type of image
formats does java support. Am I right in thinkning
that it only supports:
BMP
JPEG
GIF
TIFFyup...i think thats about more than enough for normal users right?
correct...

What type of compression does the new version of QT use?

I just opened a 1080p video shot with a AVCHD camera, did a basic trim and exported at 1080p.
What type of compression is the version of QT that comes with Mavericks applying to the video? Is it heavily compressed?
Thanks.

Hi Jasper and welcome to Discussions,
iMac Computers (August 2007)
The iMac Computers introduced in August 2007, based on the Intel Core 2 Duo microprocessor, provide two RAM slots that accommodate 200-pin DDR2 SDRAM SO-DIMMs up to 1.25” in height. The SO-DIMMs must be DDR2-667 (PC2-5300) compliant and must be unbuffered, unregistered, 8-byte, nonparity, and non-ECC.
The iMac ships with one 1 GB, 667 MHz, SDRAM SO-DIMMs installed, for a total of 1 GB. The largest capacity SO-DIMM supported is 2 GB, for a total maximum of 4 GB.
Memory configure-to-order options are: two 1 GB DIMMs for a total of 2 GB or two 2 GB DIMM for a total of 4 GB.
The memory controller supports 1 GB and 2 GB SO-DIMMs; other configurations are untested. Because the memory in the two slots is configured as a contiguous array of memory, when both SO-DIMMs are the same size and type, the interleaving function is able to improve performance.
The iMac supports a CAS latency of 5.
The width of each 667 MHz memory bus is 64 bits.
The maximum number of devices per SO-DIMM is 16.
Regards
Stefan

What types/brands of Pro soundcards are supported?

I'm interested in getting a Mac Pro for my recording studio. I'm trying to find out what types/brands of soundcards are supported. I currently use M-Audio, but looking on their site I see that they don't have any drivers that go above 10.5.8. It appears that I may need a new sound card if I get a Mac Pro. I need to know what my choices are BEFORE I do anything more. I currently use Logic Pro on my old G4 with Tiger & that's just not cutting it. However, I have a great soundcard so it still works OK for now.
Thanks to anyone who can help.

Dear bamim2: I hate to break the bad news to you (well, sorta bad, I guess)
but...with the Mac Pro, it's PCI-E cards only. PCI cards will not work at all, sadly, so your options are very limited indeed. I hope someone else will reply as well and prove me wrong
JOhn b

What type of HDD is used in the time capsule unit?

I was just wondering what type of Hard Disk Drive was used in the time capsule device. Is it a "SATA" type drive or is it a "SSD"? If it's a SATA drive how fast is it( e.g.: 5400 rpm or 7500 rpm ). If it is a standard HDD can it be replaced with a Solid State Drive or a Fusion Drive type HDD.

The hard disk changes with each generation of drive.. the original series were 7200rpm drives.. but as green drives became more readily avaialble and cheaper.. especially cheaper.. Apple moved to them.. The Latest TC uses WD green drives exclusively now..
Standard ordinary green WD are 5400rpm but maybe variable.
It is a slowish drive although probably just as fast as the original 500GB Seagate.
Now the important point.. there is no speed advantage in using a faster drive.. these boxes are processor-controller bound.
You can replace the slow green drive with an SSD and there is no improvement in speed.
Read the review where they did just that.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7
The SSD was marginally faster at writing.. the green drive did faster reads..

What type of calendars does bc offer?

We are looking for a calendar for our website. The one we currently use is not working for us. We want one that will link to pages that host events and also a running calendar of what is happening in our organization. Any suggestions?

Hi Jasper and welcome to Discussions,
iMac Computers (August 2007)
The iMac Computers introduced in August 2007, based on the Intel Core 2 Duo microprocessor, provide two RAM slots that accommodate 200-pin DDR2 SDRAM SO-DIMMs up to 1.25” in height. The SO-DIMMs must be DDR2-667 (PC2-5300) compliant and must be unbuffered, unregistered, 8-byte, nonparity, and non-ECC.
The iMac ships with one 1 GB, 667 MHz, SDRAM SO-DIMMs installed, for a total of 1 GB. The largest capacity SO-DIMM supported is 2 GB, for a total maximum of 4 GB.
Memory configure-to-order options are: two 1 GB DIMMs for a total of 2 GB or two 2 GB DIMM for a total of 4 GB.
The memory controller supports 1 GB and 2 GB SO-DIMMs; other configurations are untested. Because the memory in the two slots is configured as a contiguous array of memory, when both SO-DIMMs are the same size and type, the interleaving function is able to improve performance.
The iMac supports a CAS latency of 5.
The width of each 667 MHz memory bus is 64 bits.
The maximum number of devices per SO-DIMM is 16.
Regards
Stefan

What type of hdd is in the hp g60?

I have a G60 and the motherboard fried. I am currently building my own PC. Is there any chance I can use my HDD from my laptop in my desktop? If I can't, can I use my Windows 7 version and/or Office from the HDD?

Hi:
Even if it was legal to transfer your MS Office installation, you will not be able to because there is no installation file present on the hard drive to copy.
If you have the 25 character Office product key you needed to enter when you purchased MS Office, you can download and make your own Office 2007 or 2010 installation DVDs.
The Office 2010 Starter download does not work.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/1439.2-microsoft-windows-and-...
Paul

What type of hdd caddy should i buy for Envy 15 3040nr notebook?

Hi everyone,
I'm considering to replace my optical drive with a ssd in my Envy 15 3040nr. Since I don't have much expeience it would be nice if somebody can share his on this subject. What I need is full specs on the caddy I should buy along with the measures.
Thanks!
This question was solved.
View Solution.

Some Envy 15 models came with second bay inside aleady but need reference your model against the service manual downloadable from hp at the support link on this site.
If you don't have model with second drive bay then indeed a caddy for optical bay is easy option.
Your optical bay is 9.5mm Sata interface & they are inustry standard so simple to buy.
Example in link below >
http://www.ebay.com/itm/Universal-9-5mm-2-5-SATA-2nd-HDD-Hard-Driver-Caddy-For-CD-DVD-Optical-Bay-/2...
Like my post? Click Kudos (thumb+) to show appreciation.

What type of glass does the Iphone 6 have ?

Does the Iphone 6 have Gorilla Glass or a different type of glass ? please let me know ASAP

latest version of "Gorilla Glass" from Corning. Why is this needed ASAP?

What type of file does IMovie Read?

I am getting really frustrated with this, i have .mpg that play perfectly in quicktime, but cant seem to be imported in IMovie, so my guess is that i have to convert it into another type of file, but what file and what program should i use to convert it and then from there how do i import it, PLEASE HELP ME!!!!!!!!!

How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Using MPEG or DVD footage
http://www.danslagle.com/mac/iMovie/tips_tricks/6010.shtml
MPEG Streamclip
http://www.alfanet.it/squared5/mpegstreamclip.html
MPEG-2 Playback
http://www.apple.com/quicktime/mpeg2/
Sue

What type of deinterlacing does Apple use when exporting interlaced to QTM

There are many different ways to deinterlace video so I wonder which of them apple uses in QT Pro when you want to export to a QT movie.
For those who don't know what I'm talking about it concerns video that has been recorded for playback on a TV and each frame only holds half the information and needs to be meshed together or one of several techniques for it to play back on your computer monitor without leaving artifacts or horizontal lines around the edges of moving objects. No technique so far is perfect and I wonder which one apple chose because it doesn't give you any information on it.
Thanks
Kevin

The metal skin is really glued around the edge by a plastic frame. It is this frame that holds the skin to the main frame and can give problems.
I had to open my ti case to install an airport card. I either did it wrong or the apple glue job was poor because the gray plastic trim around the edge of the metal skin had come loose over 50% of the circumference.
I had a commercial 3M rubber cement on hand so I used that. I applied it with a toothpick very sparingly (of course the rubber cement gets stringy so the job was a ittle messy).
I let dry in a warm room for 24 hours. The reason I did that was fumes from curing glue can be caustic and attack some very thin metals etc. I fugured I wanted to lose any fumes before I trapped them in the warm computer.
It worked well and I haven't had a repeat of the problem.

What type of HDD does MS-6382 support?

Similar Messages

Maybe you are looking for