What will i do my macbook pro apple logo is frozen and can't go to desktop menu?

PLEASE HELP ME URGENT....MY MACBOOK PRO APPLE LOGO IS  FROZEN AND I CAN'T GO TO THE DESKTOP MENU.I ALREADY FOLLOW ALMOST ALL THE STEPS FROM THE INTERNET JUST TO SOLVE THIS PPROBLEM BUT IT STILL NOT WORKING..

Restart, pressing command-R to go into OS X Recovery.  From there, use Disk Utility to "Repair disk" if possible.
charlie

Similar Messages

  • I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing- Any suggestions? I have iTunes Match turned on and everything.

    I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.

    Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.

  • Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen

    Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen

    I really can't tell from your post but did you try rebooting the iPad?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
    Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

  • I have synced my macbook pro with new bluetooth speakers and can successfully play internet radio music from my macbook through bluetooth.  However I cannot get my iTunes library playing through the bluetooth speakers.  Can anyone help?

    my macbook pro is successfully linked to bluetooth speakers and I can stream music from the macbook through the speakers.  Except for iTunes.  iTunes will not allow me to select the bluetooth, only 'computer speakers' or 'apple tv'.  I can stream my iTunes library from my iPhone and iPad through these speakers, but not from the MacBook's iTunes.  Is there an easy solution?

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • I have a macbook pro running 10.5.8 and can't update it to 10.6.8

    I understand there isn't a live download I can purchase, but I've tried one of the discs from another Macbook Pro and it hasn't worked. Is this because it's a packaged disc or is my mac not compatible? I'm quite happy to purchase a copy of 10.6.8 but I don't want to buy something that won't work.
    I'm pretty new to using a Mac and while I'm not useless, I know more about the workings of a PC so please be gentle. Any advice will be appreciated!

    outafterdark216 wrote:
    I've tried one of the discs from another Macbook Pro and it hasn't worked.
    It's because it's a model specific disk and doesn't have drivers for your Mac.
    I'm quite happy to purchase a copy of 10.6.8 but I don't want to buy something that won't work.
    The Apple online store has the 10.6 white retail disk you need it has a picture of a Snow Leopard on the front.
    Copy the users files off the machine to a regular storage drive before doing anything and disconnect.
    Most commonly used backup methods
    If you can, reduce the hard drive space of users files you just copied off, this will help prevent slowdown issues after upgrading.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    Insert the disk and run the upgrade installer, if all goes well you will boot into Snow Leopard.
    If things don't go well you will have to erase and install.
    How to erase and install Snow Leopard 10.6

  • My MacBook Pro very slow after restarting and can't open some programs

    One day I was using my Mac pro everything was fine until I restarted it, now I can't open any downloaded programs like google chrome and activity monitor crashes when I open it. I get beach ball of death by dong simple things like typing and clicking a link, and sometimes when i put it to sleep the fan is still on for a minute but the apple light is off and when I turn it on sometimes I get a blue screen

    Maybe you need to provide more information?
    What model MacBook Pro do you have?
    What version MacOS X?
    Do you have any aftermarket add-ons? e.g. an added SSD?
    What have you done so far to diagnose the problem?
    e.g. Have you scanned your hard disk for errors with Disk Utility?

  • My MacBook Pro randomly disconnects from Safari and can only access it after I restart my computer...What is wrong? and how do I fix it?

    I restored my MBP to factory thinking that would help...NOPE! I spend a great portion of my day on the web, networking for my writing, what can I do...getting desparate.

    While I'm using Safari, whatever site I'm on...freezes, it just locks and won't refresh or do anything. I'm unable to redirect to anyother links or sites. At this moment I have to close Safari and restart my computer to get my internet to work proper again for a short while. I am on a wireless network. Everything worked great with NO problems for the past year then about 3 weeks ago I started having these issues. I've never used anything but Safari. My GMAIL also went funky at the same time and wouldn't display properly. Since I restored my MBP, my GMAIL is working again, but the internet still freezes. When it freezes, my airport still shows full connection.

  • HT1338 I'm trying to attach my MacBook Pro to an overhead projector and can't get it to work. If I go to System Prefs/Displays, I see the box on the screen.  But when I collapse the Prefs the desktop is not seen. Can you help?

    I'm trying to get an overhead projector to identify my macbookpro.  If I go to Prefs and select screens that dialogue box comes up on screen.  So I know there's nothing wrong with the VGA cable.  But when the screen box is collapsed nothing happens.  My computer is not recognized by the projector.  Can anyone help? 
    On a PC I used to hit "control F5.  But I don't believe that works on a MacBook. Any suggestions?

    About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
    Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

  • My iphone will not turn back to main screen it is frozen and can not get to go back

    my iphone will not get out of a locked function.  The phone at the bottom where you usually slide to unlock in changing in Japanese, and other symbols.  As well as I can not see anything or turn the phone on when unplugged.  after the screen has done the Japanese thing it acts like it needs to be plugged into computer to download itunes and states that it needs itunes to be restored.  Once I plug it into computer it only shows apple screen.  Any help?

    Try forcing a reboot on your iPhone. Hold down the Home button and Sleep button simultaneously for about ten seconds. Ignore anything the phone does and do not release until the screen goes dark and you see the Apple symbol. If your iPhone still wants to connect to iTunes, do so and see what happens. If there is still a problem, click Restore on your iPhone's summary page in iTunes. First restore from backup to try and preserve your content, but if this fails, you may have to restore your iPhone as new and manually set it up again. Good luck!
    Russell

  • I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

    I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

    Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
    That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
    If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
    Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

  • I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    There is no need for anyone to use 32-bit version anymore.
    Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
    Better support for today's hardware with larger video graphic memory and systems.
    Better memory management.

  • MacBook Pro will not boot up, stops at Apple logo

    My daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off.  Any ideas or suggestions would be appreciated.

    The internal HDD will have to be replaced.  Since you cannot get the MBP to acces the internal HDD, you will have either use Target Disk Mode:
    http://support.apple.com/kb/HT1661
    Or take out the HDD and place it in an enclosure and then connect it to the MBP via USB.  (After you have installed the new HDD and the OSX)
    You may or may not be able to get information off of the HDD.
    Ciao.

  • HT3964 I have a MacBook Pro that will not boot up. The apple symbol   Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

    I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

    Reinstall OS X.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    OR
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • The Macbook Pro will not start past the grey Apple logo screen? Any help will be most welcome?

    The Macbook Pro 13, late 2009 will not start past the grey Apple Logo screen?  Any help will be most welcome? Thanks

    Have you tried booting with the install disc that came with your computer?
    Find it and then run Disk Utility to verify your hard drive. If errors are found, try to repair the disk.
    It sounds as if the hard drive might be failing.
    Clinton

Maybe you are looking for

  • Multiple integration flows for different business operations

    Hi - I have following business requirement & need ur advice. There are different business operations (read as INSERT/DELETE/QUERY) to performed on same business object (read as CUSTOMER). In order to develop these integration use case I can have foll

  • Essbase 11.1.2.3   BSO to ASO Partitions with extra dims

    Hello Essbase brain trust. I have a situation where my BSO/planning cube has less dimensions than my ASO reporting cube. I have tried all of the ways mentioned in the documentation to map the extra dimension to no avail. Seems like the documentation

  • BPM count

    Scenario is N:1 (IDOC to FlatFile) using BPM. BPM receive step will receive IDOC. But it should terminate when the number of messages equals to 500. In which step I have to define this count in BPM?

  • Deletion HR - Infotype records using BAPI

    Hi experts, I sucessfully added infotype crecords in HR-ABAP using function module HR_INFOTYPE_OPERATION.   For deleting the same record using the same function module (operation = 'DEL'), i got error message as <b>009No data stored for 0008 in the s

  • CF9 on VirtualBox

    I have a clean install of WinXP SP3 on VirtualBox (Main computer is also WinXP SP3). I have installed CF9, IIS and SQL Server Express 2008 R2. These are the only things installed on this VM machine. I had no installation problems. I can get to the CF