Whats the Approx. plan for Oracle 11g2 64-bit release plan?

Hi,
I am looking for Oracle 10g2 for Win 7 64-bit but do not have any choice except to wait for 11g2 64-bit release.
I looked at the other similar thread but didn't find any date.
Re: What is the plan for 64-bit Windows?
Can anybody tell me the approx. date of release for 11g2 with Win 7 64-bit support?
Thanks,
Jignesh

> Question is which does SAP ECC 6.0 support ( or recommend ) Oracle 64 bit Dedicated or Shared Server db migration ?
Never heard that anyone uses shared Server Setup with SAP.
With SAP, it is NOT the user having a DB connection.
It is the workprocess, and it is keeping it even if all users are idle.
You allways have dedicated Oracle processes for SAP Workprocesses.
The rather old note 70197 states, that Oracle MTS (multi threaded server)
allowed, but you are on your own to configure it and there are some pitfalls.
Volker

Similar Messages

  • Whats the exam code for  Oracle 10g Forms

    Hai All
    Could Any Tell Me The oracle forms 10g exam code Pls
    Thanks & Regards
    Srikkanth.M

    Srikkanth.M wrote:
    Hai All
    Could Any Tell Me The oracle forms 10g exam code Pls
    Thanks & Regards
    Srikkanth.MIt seems you're asking the same question over the forum :)
    Oracle forms 10g certification

  • What is the best platform for Oracle Server?

    What is the best platform for Oracle Server?
    What is your criterion?
    Thanks,
    Somsak B.

    I believe that Oracle is developed and coded on a Solaris
    platform and then ported to other operating systems. If that is
    the case, you can assume that Solaris is the best platform or at
    least the safest in terms of performance and risk.
    If anyone knows anything to the contrary, pls correct me.

  • What are the installation steps for Oracle Fusion HCM

    Hi all
    I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
    Thanks

    If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
    If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
    http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
    Atul has also posted some good stuff on installing:
    http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

  • What's the latest patch for oracle 10g client?

    what's the latest patch for oracle 10g client? 6810189?

    The same as the patch for the Oracle database of the same version and operating system. Since you didn't specify the operating system or the particular Oracle version (10g could mean 10.1 or 10.2), it's hard to be more specific.
    Justin

  • What   the   Enviroment  required  for java databases programs?

    Hi guys
    What the enviroment required for java databases programs?
    If I have oracle of version 9i and java 1.4.1 platform
    do I need Jdeveloper platform ?

    What the enviroment required for java databases programs?What do you mean by "environment"?
    f I have oracle of version 9i and java 1.4.1 platformYou just need to download Oracle's 9i JDBC driver (ojdbc14.jar) and put that in your CLASSPATH. Then write JDBC code to connect to Oracle and issue SQL commands.
    do I need Jdeveloper platform ?No, JDeveloper is an IDE. Not required.
    Why Java 1.4.1? We're up to Java 6 now. You're two major versions of the JDK behind.
    %

  • I can't find the Demo Sample for Oracle AIA FP 2.5

    Hi,
    Can someone please help me find the Demo Sample for Oracle AIA FP 2.5? What I found is the Demo Sample for Oracle FP 11g, are there any ways to deploy it given that the version I'm using is AIA 2.5?
    Thanks,
    Eric
    Edited by: 865059 on Jun 10, 2011 3:30 AM

    I've checked out the logs, I found out that I was not able to build the DeployDemo.xml successfully though it says "BUILD SUCCESSFUL".
    The deployment failed when the script is trying to deploy the CustomerService.ear
    /FS/oracle/product/aia/samples/AIADemo/scripts/DeployDemo.xml:70: The following error occurred while executing this line:
    /FS/oracle/product/aia/samples/AIADemo/scripts/AIADemoCoreDeploy.xml:82: The following error occurred while executing this line:
    /FS/oracle/product/aia/samples/AIADemo/scripts/DeployWebServices.xml:18: Deploy error: Operation failed with error:
    jdbc/soademoDS not found

  • Whats the best option for passing parameters between tf?

    Dear All,
    I have three Task Flows:
    1. TF1
         -  Main Taskflow that calls a web service to gather its data
    2. TF2
         -  Secondary taskflow which receives a parameter and depending on the value of the parameter received will display its data accordingly.  Generally any data
         is feed from TF1
    3. TF3
         -  Same as TF2Use Case:
    All three TF will be dropped to the page as Regions in a Webcenter Portal Application. Changes in TF1 should propagate into TaskFlow 2.
    Question:
    1. How do I configure that changes in TF1 would be propagated back into task flow 2 and 3 and whats the best option for this?
    2. At runtime, user can choose to edit the page and TF2 and TF3 can be deleted but TF 1 should remain as the source of information.
    Given the scenario above:
    - shall I wire the taskflows via page parameters?
    - contextual events?
    What are the considerations that needs to be thought of. I havent done such requirements before.
    Please help.
    Webcenter 11.1.1.6

    Contextual events seem to be the best case.
    This way you can trigger whenever you want. Web services can be slow so you can trigger the event when the gathering of the data has been finished and then pass some value on the event.
    An event also has a payload so it's an ideal scenario to add the data from the service on it so you can use it in the other TF's.
    In order to manage the deletion of the TF1, you can use the UI events on the composer: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_page_editor_adv.htm#CHDHHFDJ

  • What the Initial value for sy-tabix & sy-index

    Hi Folks
       I have a small doubt.
    What the Initial value for sy-tabix & sy-index?
    Can anyone please clarify me?
    Regards,
    Sree

    hi sree,
    both values are initialized to 0 before processing and after processing values are changed according to used scenarios.
    if helpful reward some points.
    with regards,
    suresh babu aluri.

  • Please provide the patch set for Oracle Enterprise Manager Grid Control 10

    Hi,
    please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
    patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
    Thanks,
    Vishal Hande.

    user12009184 wrote:
    Hi,
    please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
    patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
    Thanks,
    Vishal Hande.you must obtain all patches directly from
    http://support.oracle.com

  • Can't Create the ODBC connection for Oracle 10g

    Hi,
         I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
    system error code 998
    could not locate the setup or translator library
    Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
    Best Regards,

    mwz wrote:
    I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
    system error code 998
    could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
    Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?

  • Where can I download the ODBC driver for Oracle 10g XE?

    where can I download the ODBC driver for Oracle 10g XE?
    I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driver

    already checked these http://www.connectionstrings.com/oracle, I need Help Please.

  • Changing the predefined sap logo and whats the px value for font size

    Hi,
    I am  unable to remove a Sap logo on ajax fwk: masthead . I want to replace my logo with that sap logo .
    but when i  try to set url to logo to that image .it doesn' change.
    Help me to resolve the problem
    and whats the px value for font size more than 10

    Hi,
    The URL to set logo  should work when you edit it in the correct theme. Usually cache issues prevent us from seeing the desired result. By Clearing cache your issue should get resolved. Otherwise if need be you can edit the com.sap.portal.navigation.masthead par file and define the manner in which you want your logo to be displayed in the masthead. Download the par file and open it in NWDS. Search for "logo" keyword you will find it. Edit the current image and upload the PAR file again. 
    Regards
    Anand Sekar

  • I have no idea what the password is for my airport utility

    I Have no idea what the password is for my airport utility

    Open Keychain Access in the /Applications/Utilities/ folder and try finding it. If that doesn't work, click here and perform a soft reset.
    (112929)

  • Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

    Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

    You are asking two different questiions:
    1. What's a good photo editor? Answer to that here is probably obvious.
    2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program.

Maybe you are looking for

  • DataBase Design

    Hello Friends! I am new in database design. I design a database for a company which sale their products. The company has their outlets in four regions i.e. (North, South, East and WEST) and they want to check their sale of the Product.. The sample re

  • IPhone app crash diagnosis

    I have one user of my app who reports that she sees the default bitmap for 2-3 seconds and then goes straight back to the home screen: in other words, my app is silently terminating right at the start. Would a crash cause this - or would a crash also

  • Run Time Error in AIR...but the same code works in Flex...

    Hi, It seems that I am having a big problem with shaders in AIR, when I try to instance, Here is my code:                   import flash.display.Shader;                   import flash.filters.ShaderFilter;                   [Embed(source="crossStitch

  • ORACLE SID vs DBID vs INSTANCE_NUMBER

    Hey, Can please anybody explain me the difference between: 1. ORACLE SID 2. ORACLE DBID 3. ORACLE INSTANCE_NUMBER What is the primary usage of each of these identifiers? Thanks. Regards, Michal

  • Add report to module SD

    Hi all. i writed report yet, i want run report in module Sales and Distribution. To Who those is help I. Thank very much.