Whee is the 'Find in page' function in safari ios7?

I'm unable to find the 'find' function in the updated ios7 safari? Can bony body help? Thanks.

After you load complete page, just type in adress bar term that you want to find and scroll all the way down. You will see new "section" which is called on this page and number of matched terms in brackets. If you click on one of the word found on page it will lead you to a part of that page and the term will be highlighted.

Similar Messages

  • Crystal Report for VS2010 - The Go To Page function does not work

    When running a report into Crystal(VS2010), the Go To Page function does not work.  Typing in a page number and pressing Enter does not take you to that page.  The report remains on the current page. I'm not sure if there is suppose to be a button like the one in Crystal 8.5(VS2008).

    As long as you are using the CR assemblies for VS .NET, the viewer (Win) should look like this:
    Remember, the ActiveX viewer based on the Report Designer Component (RDC, referencing craxdrt.dll) is not supported in VS 2010.
    - Ludek
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • Is it possible to have the Find My iPhone function on a PC.  I have this app running well on all my OS devices.  Just wondering if I can locate my OS devices from an "app" on my PC.

    Is it possible to have the Find My iPhone function on a PC.  I have this app running well on all my OS devices.  Just wondering if I can locate my OS devices from an "app" on my PC.

    I do not believe there's an app for that on PC. I do recommend getting the iCloud dashboard for PC and to try it there. I would myself if my PC was working.
    PC ***** get a Mac.
    You can always go to iCloud.com to find your phone.

  • My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

    My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Where is the snap back to page function in Safari?

    Is the the "Snap back" to page function gone? I cannot find it anywhere on Safari 4

    Thanks. I can see that it is also useful in the search box but Apple should not have taken it out of the address bar. I use that function a great deal. The "Top Sites" function is nice but it doesn't replace the snap back function in the address bar.
    Sometimes I think the programmers at Apple do not actually use the applications they work on.
    Is there a request page I can ask Apple to put snap back back in?

  • The find in page feature is not working

    typing text into the find bar at the bottom of the firefox 5.0 screen is not finding text on the page. Internet Explorer finds text - the firefox find text on open internet page feature has stopped working. It cannot find text that i know is there

    Make sure that [] "Match case" doesn't have a check-mark on the Find bar (Ctrl+F).

  • InDesign mail merge:  changing the "record per page" function

    I am a new InDesign user and having a problem that I have spent several days trying to correct.  Briefly, we are “attempting” to create our product catalog by importing our QuickBooks data (as a csv or txt file).  
    I think I have isolated the problem to the “records per page” setup. 
    For whatever reason, when I open the .csv or .txt file (Window > Utility >Data Merge),
    From the Data Merge Panel, I am selecting the source file and the “Create Merged Document” box starts. 
    However, ID is defaulting to one record per page.  When I open the Multiple Record Layout tab I get “… optiion disabled because single record is selected…”
    I have spent several days reading every post I could find on this and I am going brain dead.  Can anyone help me here ?
    Thanks in advance for your time and attention.

    Hi Jeffrey,
    Thank you for taking the time to put the video capture together.  Unfortunately, it is hanging up about one-third of the way through...   
    What it does show is opening a clean sheet, opening Pages, and then opening Data Merge....
    As you can see on the two screen shots below, I don't even get the Data Merge option on my Pages dialog...?
    So, I'm wondering if I have a problem with my ID install or have some how corrupted a setup or default file.... Hmmmm
    Thanks again, appreciate your help.
    Message was edited by: Everwood Farm
    I re-installed ID - probably didn't need to do this - and deleted the cache and setup files which was the culprit.  Now works perfectly ....  go figure :-)

  • How to get rid of find on page above keyboard

    I can not get rid of find on page bar above the keyboard on my ipad2.  I tried closing all apps, shutting down the ipad as suggested in other solutions, but it did not work. 

    If you are talking about the Find on Page feature in Safari, you can't get rid of that. It is there for a reason,  and that is so that you can search for something g on a given web page.

  • Is there a way to change 'Find in page' to put the focus back at the bottom of the page? (FF 12.0)

    With the update to Firefox 12, using the 'Find in page' feature now centers results on the page (see https://bugzilla.mozilla.org/show_bug.cgi?id=171237 for specifics). I checked the about:config page and I don't see anything that would change this back to the prior behaviour. I find myself struggling at time to find the highlighted text now, whereas before I knew exactly where to expect it on the page.
    Is there any way to go back to this earlier behaviour without having to revert to an earlier version?

    It's not uncommon for add-on authors to find ways to undo changes to Firefox after a new release. Without an add-on, I ''suspect'' there's no easy way to get at this.

  • 10.6.8 update crashed before it completed and now the Finder won't launch

    This morning I was installing the update on my 25" iMac 2.8 GHz Intel Core 2 Duo (was at 10.6.7) and after almost 15 minutes of the installer claiming to be moving files around, the screen went blank except for being backlit. After few minutes of pondering what to do, I restarted the computer and the "Finder quit unexpectedly." message started and all my iMac wants to do is have me send thousands of reports to Apple. I tried the safe restart and nothing changed expect the process number in the reports restarts in the low hundreds.
    I have LOTS of applications on my dock and while most of the Apple applications (Safari, Disk Utility, etc.) crash upon launching, a few applications don't (Firefox takes a few minutes to crash while Chrome seems okay enough for me to send this report). The "About this Mac" claims that 10.6.8 is installed, so Software Update claims there are no updates, so I can't use that to reinstall the update (I'm not sure I should even if I could).
    Because I cannot do is relaunch the Finder from either the Dock or via the "Force Quit" command I can't reinstall 10.6.8 via the. I can open a terminal window but I'm not sure what to do with that to get me out of this situation. I downloaded the combo update but without the Finder running, I don't know how to launch it via the a terminal window. Any suggestions welcomed.
    TIA.

    I've got my Mac back!
    Even though the Finder wasn't running, because I had populated my Dock with dozens of applications, I was able to launch the Terminal app and open a window. From there I was eventually able to launch the Installer, point it at the 10.6.8 Combo Update (for some reason, fortunately, I had downloaded it rather than letting Software Update do it), and wait at least 30 minutes when the installer claimed that there was less than 1 minute left to complete the install. After it was done and I restarted the Mac, it no longer insisted that I needed to send/ignore thousands of "Finder quit unexpectedly." messages and the Finder was running.
    BTW, towards the end of the installation (or re-installation), the Finder began to function (my desktop icons appeared and I could open folders) and now the only remaining issue is the Menu Bar won't appear unless I click the Finder in the Dock.
    Thanks to those who helped me by providing the instructions needed to use the Terminal window correctly.

  • Is there any way to locate a stolen ipad if I have the Serial number but didn't turn on the Find My Ipad?

    My Ipad (and backpack, laptop, & other stuff) was stolen at the Portland Oregon Airport at 1:30 PM on 2/27/12.
    unfortunately I had not turned on the Find My Ipad function. I do have the serial number and the IMEI number (although I never enabled the 3g function).
    Is there any way to locate or track this?
    Earlier discussions suggest this can't be done, but I have registred the laptop with Apple.

    No.
    Apple are not in the business of tracing your stolen iPad, any more than the manufacturer of your car will trace that if stolen.
    Tell your service provider (now, before the thief spends a few thousand on international calls....), the police and your insurer.

  • HT201365 Find My iPhone no longer works for me to know where my wife and children's phones are. In earlier IOS versions, I added my iCloud account to their devices and only had Find My iPhone function active.  Can't do that now; what do I do?

    Before IOS 7, I created an account on my wife and childrens iPhones, iPads and iPod devices with my iCloud account, only having the Find My iPhone function turned on.  It worked great.  Now, with IOS 7, it is not working and I don't have the option to have the Find My iPhone function on my iCloud account on their devices.  Does anyone know how to make this work?  My family loses their devices frequently and I am concerned I won'e be able to help them find them.  Thanks!!

    They only need their main iCloud account to have Find My iPhone on. If your account is not their main account it won't work. Only one account can enable that function on a device. They don't need to have the app on their devices unless you want them to find you.
    If you can see the devices when you log into their accounts on your Find My iPhone app they are being recognized by the app. But as Winston said if they're not turned on, if they are not on a network, cell or wifi, then they will read as offline. This often happens when I look for my wife's phone when she is at work, her wifi system there does not keep the connection active when the device goes to sleep and in some areas of the building there is poor to no cell connection. And sometimes the service just doesn't pick them up for no obvious reason.
    iOS 7 has several annoying glitches right now that hopefully will be resolved soon and this could be one for you. I would try this again by having all the devices in one location , restart all of them, make certain the function is enabled on all of them and that wifi is connected ( if you have a wifi network available ) or that they are connected to a cell network with a strong signal. Then launch the app on your phone and log in with their accounts, their locations should show up.

  • Acrobat 9 bug? - Print Pages function does not print all bookmarked pages

    We use the Bookmark Print Pages function to allow for easy printing of sections of large PDFs. All of the pages that should be printed are bookmarked. The bookmarked pages print correctly in Adobe 8, but not in Adobe 9.
    I have put together a javascript workaround, but would prefer a solution that does not require distributing a file to all users.
    I would appreciate any suggestions on other possible workarounds.
    Here is the bug report I submitted to Adobe:
    Concise problem statement: The "Print Pages" function for bookmarks does not print all bookmarked pages in Adobe Reader 9.0 and 9.1. The same bookmarks print properly in Adobe Reader, Standard, and Pro 8.
    Steps to reproduce bug:
    1. Open the Adobe Acrobat SDK JavaScript for Acrobat API Reference PDF (Version 8.1, April 2007) in Adobe Reader 9.0 or 9.1.
    2. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
    3. Open the same PDF in Adobe Reader, Standard, or Pro 8. (I used Adobe Professional 8.1.3.)
    4. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
    Results and Expected results: Printing from v8 results in 12 pages. Printing from v9 results in 9 pages. Pages 741, 754, and 769 did not print from v9.

    I'm having the same issues.  Using the latest version 9.3.3.  Is this a bug? I tired calling adobe but their CR sounds like 3rd country only.  Anyone can shed a light on this issue?

  • Find Object.vi function of 3D picture control - when object not found

    I am using Labview 8.2, and this post is regarding the 3D Picture Control.
    I am wanting to make use of the "Find Object" VI to either return a reference to a named object, or otherwise determine that it does not exist yet.  However, if I call it with the name of an object that doesn't exist yet (i.e. just any random string), it returns an error message that arises from the attempt to release a queue (the reference to which gets lost when crossing a zero-iteration For Loop's tunnels), instead of an error message that says "Object not found" which I would find much more useful.  With a simple modification of the "Find Object.vi" function, this behaviour can be changed, by replacing the For Loop's tunnels with shift registers.
    The problem with the current function is that the error is not an intentionally thrown error, rather just the result of the queue's refnum being set to the default 0 as it "exits" the For Loop, since in the situation that an object is not found, the code passes a 0 to the N terminal.
    The attached images show the problematic code and the simple modification
    Attachments:
    Find Object.png ‏2 KB
    Find Object_modified.png ‏2 KB

    pauldavey,
    I agree with you - the current way of handling the case of an object not being found does not appear to be ideal.
    This was reported to R&D (# 43D8GSVQ) for further investigation.
    Thanks for the feedback!
    Regards,
    Simon H
    Applications Engineer
    National Instruments

  • Find User page

    Add a new line in the find user page..
    For example;
    extended attribute is "True/False"
    I can display my extended attribute in the find user page select boxes...
    But i need a easy new line for my admins to just select the value - true / false.
    the find user form is confusing me with those query.conditions...., rowId..clause statements
    sample code would be really appreciating.
    Nsankar

    Add a new line in the find user page..
    For example;
    extended attribute is "True/False"
    I can display my extended attribute in the find user page select boxes...
    But i need a easy new line for my admins to just select the value - true / false.
    the find user form is confusing me with those query.conditions...., rowId..clause statements
    sample code would be really appreciating.
    Nsankar

Maybe you are looking for