When (blue) imessages turn into (green) texts - iphone 5
When I try and send (blue) imessages they often default to (green) texts. That is fine but I am finding out that they are not always received.
So when I am texting and I am in the green I always wonder if they are received. Please advise what is happening and is there a way to correct?
Thank you!
Try a reset when your iPhone is plugged into the charger as you say it does not respond when not plugged in...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
See if it will charge after this.
Similar Messages
-
what are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?
Hi,
What's the worst that I've spent 100 Eur alltogether for GPS map based applications for several sports - golf, bike, ski, etc. These applications use data from iPhone Map application and its disaster after my update onto iOS 6. These are pictures of 2 of my favorit golf resorts:
And here one example from a place where I use to bike:
Very nice, isn't it?
And unfortunately this problem won't disappear even when Google put stand alone map application into iStore.
So I have only way to downgrade to 5.1.1 immediately to not throw away money I already spent.
Ivan -
Server in sap management cosnole does not turn into green
I installed this trial version from http://www.sdn.sap.com. with the download, there is a tutorial explaining all steps for installation. In SAP Management Console when I click on NSP "Start" it should change to green but in my case it stays yellow.
I do not have an access key to the server. When I try to log on to this server it asks me for user and a password so I tried to use nspadm with it's password but it did not accept.
as far as i know that in order to let the server turns to green all I need to do is to right click on it and choose starts but even after doing this it does not turns into green.
I want to create another user in order to user it instead of SAP*
The role that I am giving to this user is u201Csystem administratoru201D but after I save it I get this message on screen: u201CNo update server found for Eu201D
despite of this previous message it creates it. I get this if I create a new user with the previous name I wanted to create previously.
In general I need a way to let me create my own users so I can start developing in ABAP.
I can access every thing in this workbench but if I want to do some changes on classes and packages I create it tells me that I can not using SAP* and if I want to create other users sing SU01 and then logon again using using these new users I get a problem in accessing the system using them.
I need to know what is reason for not turning the server in sap management console into green and i why i can not create users.
Thanks
AmalDear Vincent;
this is what i got from "Developer Trace" for "disp+work.EXE"
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 70
intno 20020600
make multithreaded, Unicode, optimized
profile
amal-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_amal-PC
pid 976
Mon Oct 10 17:01:10 2011
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 976) [dpxxdisp.c 1268]
shared lib "dw_xml.dll" version 70 successfully loaded
shared lib "dw_xtc.dll" version 70 successfully loaded
shared lib "dw_stl.dll" version 70 successfully loaded
shared lib "dw_gui.dll" version 70 successfully loaded
shared lib "dw_mdm.dll" version 70 successfully loaded
shared lib "dw_rndrt.dll" version 70 successfully loaded
shared lib "dw_abp.dll" version 70 successfully loaded
shared lib "dw_sym.dll" version 70 successfully loaded
shared lib "dw_aci.dll" version 70 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Oct 10 17:01:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >amal-PC_NSP_00 <
DpShMCreate: sizeof(wp_adm) 20000 (2000)
DpShMCreate: sizeof(tm_adm) 4323912 (21512)
DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064
DpShMCreate: sizeof(comm_adm) 556064 (1104)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (1792)
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3920
DpShMCreate: SHM_DP_ADM_KEY (addr: 09620040, size: 5055296)
DpShMCreate: allocated sys_adm at 09620048
DpShMCreate: allocated wp_adm_list at 09622F28
DpShMCreate: allocated wp_adm at 09623020
DpShMCreate: allocated tm_adm_list at 09627E48
DpShMCreate: allocated tm_adm at 09627E70
DpShMCreate: allocated wp_ca_adm at 09A478C0
DpShMCreate: allocated appc_ca_adm at 09A4F5C8
DpShMCreate: allocated comm_adm at 09A572D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 09ADEEF8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 09ADEF50
DpShMCreate: allocated j2ee_adm at 09ADEF88
DpShMCreate: allocated ca_info at 09ADFEE0
DpShMCreate: allocated wall_adm at 09ADFEF8
DpCommAttachTable: attached comm table (header=09A572D0/ft=09A572D8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Mon Oct 10 17:01:16 2011
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=159 reserved=47 quota=10%
Mon Oct 10 17:01:17 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654]
Mon Oct 10 17:01:22 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1755]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpAppcBlksLow: max appc blocks in queue is 250 (50 %)
DpWpBlksLow: max wp blocks in queue is 400 (80 %)
Mon Oct 10 17:02:07 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Mon Oct 10 17:02:27 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
this process "disp+work.EXE" is still yellow -
HT204315 How can I have my phone back when I havent turn on find my iphone
I Lost my iphone
how can i get it back when i havent turn on find my iphone
i have already log in icloud and still have account and passwordyusette wrote:
Kilted Tim,
Now I'm confused...
I do not know much about iPhones as you can see. I bought it from somebody in Miami..so I don't have any
proof of purchase of course nor Im a current or former AT&T customer. does that means that I will never get my Iphone back?
Yes. That means you will never be able to get your phone legitimately unlocked.
You purchased a gray market phone. You do not meet AT&T's requirements to have it legitimately unlocked.
It had to be hacked or jailbroken when you bought it since you were able to use it on another network.
Updating it has re-locked it to AT&T or bricked it. Either way, you can not use it. -
When did Apple turn into piece of ****? It prompted me to update itunes and install icloud. I did. It crashed saying it was not properly installed and reinstall it. Since then I have been trying. I worry if my thousands of dollars worth of music is lost
I had a very similar problem, error 4251. (look in your log you will see that error) Since I finally fixed my problem, I thought I would see if I can help someone else.
What I found is that I lost burn ability in both iTunes AND Windows. Like you did. I did some digging and found that this wasn't hardware related at all. In fact, this boils down to a registry key getting messed up. (sigh) Yeah. It causes the system to get a bad 'handle'.
OK, here's what to try. Go to this Microsoft KB article. Scroll down and find the *manual* instructions for Vista. Delete the registry key that it specifies. Reboot. Now verify that you can burn in Windows. (If you have a RW disc, do a disc erase, or just try and burn from Windows Media Player.) If that is working now, you're on the right track.
Now the issue is that iTunes will still be broken. Go and install the latest Gear driver. (I know you may have done it, but do it again.) Now follow the intructions in this Apple KB article to verify the "GEARAspiWDM" info is back there in the registry. Now reboot. Try and burn in iTunes.
I hope this helps. -
I Lost my iphone how can i get it back when i havent turn on find my iphone i have already log in icloud and still have account and password
Contact your carrier and the police. If it was lost in a specific building, ask the people running it.
(124410) -
When I bought the program asks enter Albasword and when enter Albasword turned into questions , and I do not remember the questions is the best teacher
Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
(88705) -
My iMessaging keeps turning into regular text messaging
My iMessaging always stops working, it works for a while then doesnt. It turns my messages into regular text messages, and i want it to stay on imessaging.
http://■On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can adjust this behavior in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage appear in a light blue bubble, while messages sent using SMS or MMS appear in a green bubble.
-
Spaces removed when inserting a value into a text item
Dear members,
(Forms 6i c/s)
I have a databased function returning a string of characters (varchar2). This value can have spaces at its end.
When I put this value into a text item in Forms, the spaces at the end are removed.
How can I avoid that ?
Thanks for your help.Hi,
There is no elegant solution for this. Metalink has a discussion of the topic in note nr 247715.1
/Michael -
pics took by rear cam all turn to green but front cam normal, please advise?
You can't do anything to get service in your country by Apple, the warranty is only valid in the country where the phone has been bought.
If you can't bring it back to the USA, you'll have to get it checked by an experienced 3rd party repair shop, but this will void the warranty, and Apple will not service the device anymore, even if you want to pay for it. -
My friend recently got an iPhone today. Before our conversations were with the green bubble, because I had an iPhone and she didn't. Now that she got her iPhone, she texted me and I received it as an iMessage, but when I would reply it would send as a text message. I have made sure that my iMessage setting are set up properly, and that he phone I marked as an I phone in the contact but it's not working
When other users with the same 5s as I have, text her, it's iMessage as well and they're not having the same issue. I don't know why this is happening. I've tried deleting the contact and restarting my phone but nothing works
-
I cannot receive or send texts, when my or someone elses imessage is not turned on. Why is this and how do i fix it?
This is very unusual try pressing the Home and the Sleep/Wake button untill the apple logo appears, this will perform a restart and may fix the problem
Hope this helps -
file:///var/folders/w6/qj__6rbs7hscmcdq8zg397jw0000gn/T/com.apple.iChat/Messages /Transfers/10277484_10101083982197987_5693627767441707966_n.jpg
Sorry. Your image did not post correctly. No idea what you're talking about.
-
Please help!
If you have an older MBP with a removable battery, you might experiment with removing the battery, plugging it in, replacing the battery, etc.
You might experiment with a different charger, if you have access to one.
Otherwise, you can try Resetting the System Management Controller .
Having said all that, it is most likely you will have to take the computer in to a service place for testing/repair. -
I don't receive iMessages on my iPad and iPod touch when a person sends me an iMessage using my phone number. Is this how it is?
@Tommyvercetti, iPod Touch and iPad don't need to have that option, since by default they can only use an email address to send/receive. iPhone needs that option since by default it uses the phone number, so to sync across devices you must change the caller ID to be the email.
When you say "nothing happened", are you saying that messages are not syncing for you?
Maybe you are looking for
-
This has given me a headache…. 11 Months ago I cancelled my bt vision service due to my Freeview signal not been good enough... I received a pre-paid package from BT to send it back, which I did. Fast forward 6 months, I realised I was still being ch
-
Exchange User IP - Get Object Returns Body of E-Mail As HTML
All, Using Orchestrator to monitor a mailbox and create System Center Service Manager incident from it. I am utilizing the Activity Directory User IP to monitor to the mailbox, pull the subject/body/send from the e-mail, and create an incident. Every
-
Forgot answers of security questions
Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and still didn'
-
Why N95-1(0534832) still do not have V30 FW
Last month,i know that most N95 can be upgrade the firmware to V30 .Right now there is some people who live in Taiwan that they can upgrade their cell phone to v30.But the users who live in Hong Kong they can't. Anyone can tell me that how long do al
-
Hi together, I have got a question. I want to set up my own BW system for personal training and testing. Is this possible at all? What minimum hardware requirements are there? Does SAP gives out training licenses for personal use? Or do I have to buy