When Burning a movie, it keeps asking for more disks
I have finally gotten around to trying to burn a movie and after I have everything set to go. I click on burn once then the second time to start burning. It asks for the disk, which I insert. Goes through I believe stage 3, then spits out the disk and asks for a new one. I did this even though I thought it was strange because I obvioulsy can only use one disk to view the movie. So I put the new disk in and let it go a while later it asked for another disk. At this point, I cancelled the burn. Help what am I doing wrong. I have looked through all the help topics and the burning section is very vague.
Hi Theresa:
A bit more on the subject from Apple:
http://docs.info.apple.com/article.html?artnum=93629
And be sure to do everything he mentions here:
What are some common reasons for problems when creating a DVD?
http://www.kentidwell.com/idvd4/#faq_20
Sue
iMac ppcG5 1.8 GHz 20FP & iMac G4 800MB 17FP Mac OS X (10.3.9) Superdrives & 1 G RAM all around
Similar Messages
-
ITunes keeps asking for a disk while I am trying to uninstall
I am trying to uninstall iTunes so that I can reinstall it. However, it keeps asking for a disk. Also I have tried to use Windows Cleanup Utility 7.2, but get an error when I attempt to run it. I think I may have started uninstalling the components in the wrong order. Any help is appreciated. I am using Windows 8.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
If you cannot get a component to uninstall properly move on to the next one, then delete the named folder. The reinstall should be successful.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I have photoshop 7 on my pc but have lost my original disk.... I went to update it and the update is not seeing the file on my pc... and it keeps asking for my disk.. but i can't find it...
How can i update it...Ah, you had Photoshop 7.0 working, and now it's not. I see that as a separate issue to updating it. I'm not sure why it would ask you to update it.
Do you know whether you have 7.0 or 7.0.1 at this point? You might be able to do a Properties function on Photoshp.exe and see that info.
You could make an attempt to reset Photoshop's preferences to defaults. Press and hold Control - Shift - Alt simultaneously immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
Only other thing that comes to mind is to use Windows System Restore to restore back to a restore point where Photoshop was working, or restore from a backup (you do make backups I hope).
If that fails, and you need to do a fresh install but no longer have the original disk and serial number I'm afraid you may be out of luck. There's no place I know of from which to download a fresh full copy of Photoshop 7.0.
-Noel -
I have been trying to get elements 13 working for a couple of weeks, after many hours of chat with support and them using remote access, it has still not worked. However, having been on several websites I have made progress and it is now running as the trial version.
The organiser works fine but every time I open the editor, it asks me to sign in and requests the serial number followed by the message "verifying serial number" which disappears after a few seconds. The same thing happens every time I open it as if my serial number is not being accepted
Please helpInDesign CS2 will not be able to open PM files on XP SP3, Vista, or Win 7.
Bob -
Studio 8 keeps asking for install disk
Hi-
PC, Win XP SP2, Compaq R4012 laptop. I had Studio MX 2004
installed and downloaded the Dreamweaver 8 and Fireworks 8 demos to
try out. I installed them and used them for a couple of weeks
(Studio MX 2004 was still on my machine at this time--it was my
understanding that I could leave it in place while I demoed DW 8/FW
8). I purchased Studio 8, uninstalled the demo software,
uninstalled Studio MX 2004, rebooted and installed Studio 8. Now
about every third time I start one of the Studio 8 programs I am
prompted to either reenter the Studio 8 registration number or am
asked to insert the installation disks-- a "The feature you are
looking for is located on your installation disk." (or something
like that) window pops up and I have to put in the installation
disk, let it run for several minutes and then, Dreamweaver 8 in
this case, will start just fine. Also, in DW 8 I had associated
StyleMaster with .css files but decided to remove that association
and just use the CSS editor in DW8. However, every once in a while
DW 8 will "revert" its preferences back to using StyleMaster as the
CSS editor. Honestly, I've never had anything like this happen
before. Did the demo possibly mess things up (I've heard of Adobe
demos later causing problems with full installs)? Should I
uninstall and reinstall Studio 8? If so, how can I get a full
"clean" install so that any bits of MX 2004 and/or demo software
are completely removed?
Any help would be greatly appreciated.
-=SBSee if this helps;
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=a3f38dcf#cd_prompt
Nadia
Adobe® Community Expert : Dreamweaver
http://www.DreamweaverResources.com
|Tutorials|SEO |CSS Templates
http://www.csstemplates.com.au
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver
"nuie" <[email protected]> wrote in message
news:efb0rk$398$[email protected]..
: Hi-
: PC, Win XP SP2, Compaq R4012 laptop. I had Studio MX 2004
installed and
: downloaded the DW8 and Fireworks 8 demos to try. I
installed them and
used
: them for a couple of weeks (Studio MX 2004 was still on my
machine at this
: time--it was my understanding that I sould leave it in
place while I
demoed DW
: 8/FW 8). I purshased Studio 8, uninstalled the demo
software, uninstalled
: Studio MX 2004, rebooted and installed Studio 8. Now about
every third
time I
: start one of the Studio 8 programs I am prompted to either
reenter the
Studio 8
: registration number or am asked to insert the installation
disks-- a "The
: feature you are looking for is located on your installation
disk." or
something
: like that pops up and I have to put in the installation
disk, let it run
for
: several minutes and then, Dreamweaver 8 in this case, will
start just
fine.
: Also, in DW 8 I had associated StyleMaster with .css files
but decided to
: remove that association and just use the CSS editor in DW8.
However, every
once
: in a while DW 8 will "revert" its preferences back to using
StyleMaster as
the
: CSS editor. Honestly, I've never had anything like this
happen before.
Did the
: demo possibly mess things up (I've heard of Adobe demos
later causing
problems
: with full installs)? Should I uninstall and reinstall
Studio 8? If so, how
can
: I get a full "clean" install so that any bits of MX 2004
and/or demo
software
: is completely removed?
: Any help would be greatly appreciated.
: -=SB -
My g5 keeps asking for scratch disk...
when i try to open fce, my g5 askes me for my scratch disk, i have the option to reset it or find it. if i pick reset and set up new scratch disk, it goes back to the same window. I cant get it to open fce?
what do i do?It should be Mac OS Extended, Juornaling can be either on or off. Most hard drives are formatted for windows use and won't work right on a Mac.
Go to Applications>Utilities>Disc Utility. Select the external in the left payne of the window, choose the one slightly offset to the right (there are two disc names). Then in the ERASE section of the main window click the ERASE button (the one next to First Aid. In the Volume Format there are options, choose Mac OS Extended, give the external a NAME and hit ERASE (the one next to Security Options). The drive will be ready for use.
I hope this is a brand new drive?
If you already have some files on this drive you should back them up before this operation or they will be gone.
Al -
It keeps asking for security questions i dont remmber and i cant reach apple
I just bought 10 $i tunes gift card .. But when i make abuy it keep asking for security questions . Icreated my id 3 years ago and i really dont remmber the answers I tried to reach apple support but its only available for us phone numper What should i do now ?? Ineed help
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
Why does iTunes keep asking for my password when I want to listen to my music on my iPhone?
When I want to listen to music on my iPhone, iTunes keeps asking for my password. I am not purchasing anything. It started today. Why is that?
I've been having the same problem on my iPad and iPhone. I talked to Apple customer service this morning. They had me do the following on both devices in the Settings:
* Sign out of iTunes & App Store
* Sign out of FaceTime
* Sign out of Game Center
* Delete iCloud account
They also had me restore my iPad due to some glitchy behavior in the Music app.
Things seemed to me fixed for a few hours until I went into the iTunes Store app on my iPad and added a movie to my Wish List. When I went back to the Music app, the dreaded "Sign In to iTunes Store" popup started showing up again on both devices. Suspicious!
So, I cleared out my Wish List in both the iTunes Store and App Store. I've been poking at the Music app on both my iPhone and iPad since then I haven't seen that popup once since then. I'm not going to declare victory yet since it's only been an hour or two, but I thought that this was worth mentioning. -
I am trying to put my ipad back to factory settings and it keeps asking for my original Id which is the reason I am needing to reset it. When I try to do this via password prompts it asks for my date of birth which I enter correctly and it tells me it is incorrect and then trying the email route this does not send any emails to the registered accounts I set up originally - help!!
My guess is all the issues are probably related and fall back to malware.
AVG is probably correct in identifying malware. So I suggest you try some cleaning tools other than Emsisoft .
ones I use (all of them one after the other until I find one that can cope) are;
Roguekiller http://www.adlice.com/softwares/roguekiller/
Malwarebytes anti malware Free http://www.malwarebytes.org/mwb-download/var2/confirm/
ESET online scanner http://www.eset.com/int/home/products/online-scanner/
So first create a clean boot in Windows using Microsoft's instructions https://support.microsoft.com/kb/929135?wa=wsignin1.0 and then run the anti malware applications.
My outside looking in guess is that malware has set itself up as an internet proxy and is is downloading copies of itself and other malware, blocking some mail port as times as downloading more malware is more important, and probably breaking your tivo as well..
Try the malware programs first. If that does not work I will try and talk you through some logging to see what is happening. -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
This is so frustrating! I have an itunes store account, etc. I lost all my info when I had to "restore" my iphone.
I wasn't able to do the "restore" until recently, gosh it was about 6mos or more ago when my iphone died...
So, as I get older I am having memory problems and haven't been able to access my itunes account.
Obviously when I did the "restore" on my iphone I lost all my info with it... So, wanting to use my iphone for
music, games, etc. I had to create a new apple id, fine, but when I wanted to download a "free" app it says
my apple id hasn't been used with itunes so it keeps asking for credit card info.
I do not remember ever having to have a credit card before!
I am so frustrated... First it was not being able to access my account then having to create a new one, fine!
But now I can't download "free" content without credit card information!?!?!?!?!?!?!?!?! UGH!!!!!!!
Please, can anyone help...?!?
Sincerely,
"Distressed"If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534 -
Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either. So I can't update my apps, download songs or games now as it will charge my friend
Hello, 34sandy.
Thank you for the question. This behavior is normal if updated on another Apple ID account holders computer. To change the Apple ID on your device, follow the steps in the article below.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H. -
I have changed my family sharing organizer payment method but when asked to add members it keeps asking for information for a card I no longer have so I do not have the security code. My current shows in all the correct places but when asked to verify, the old card is referenced. I changed the card in itunes and on my phone and ipad.
I have changed my family sharing organizer payment method but when asked to add members it keeps asking for information for a card I no longer have so I do not have the security code. My current shows in all the correct places but when asked to verify, the old card is referenced. I changed the card in itunes and on my phone and ipad.
-
My battery was not working properly (kept running out over a few hours.) I was advised at the apple store to restore my iphone which i did. When i try to restore it to my back up it keeps asking for a password but i have no idea what this password is? could anyone help?
If your backup is encrypted, you cannot restore without the password.
You can continue to backup but you cannot restore without password.
There's no way to retrieve the password.
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
From: http://support.apple.com/kb/HT4946 -
I am not able to connect to my Wifi. It keeps asking for a password and when i enter the password it either says Unable To Connect or Incorrect Password.
This occurred only after installing a new Wifi router from Qtel (service provider). any assisyance is greatly appreciated.You should call Qtel technical support and ask for help.
Where did you get the password that you are trying? What does it look like? (Length, type of characters)
Do you know what type of security is being used? WEP, WPA, WPA2
Maybe you are looking for
-
Error In Posting Travel Costs to FICO
Hi Friends , I am working on a Business scenario on "Project with Resource Related Intercompany Billing". As a part of this scenario, one has to do time booking & travel expenses booking ( in CAT2) of a cross company employee. Then the time is transf
-
Could not deploy an JAR archive because JNDI name is already in use.
Hi, I have a problem. When the WebLogic server starts, it cannot deploy an EJB application because a JDNI name is already in use. What can I do to unregister this name ? If it is possible a better description is step by step. The WebLogic server, whe
-
Hello, I'm trying to take the first 33 seconds of a classical song and loop it 3 or 4 times. Then I need to add it to a play list on my ipod. Can I do this in itunes? Do I need to use garage band? Is there a way to fade the last few seconds of the se
-
Server got hang while doing FI posting
Hi experts While POSTING THE PAYROLL DOCUMENT (scheduled as a background job in SAP PRDN server), the server got hanged due to some hardware issue and had to switch off. Now in PCP0, the run status of the document is shown as "Documents posted", but
-
Ipod touch didnt download new software
+*after i bought the new software for my ipod it didnt download on to my ipod, and now itunes isnt picking it up because it doesnt have any software.*+ +*my ipod has no software on it and im unable to use it now :/*+ +*help someone please*+