When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images.
When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images. Have tried new card and card-reader to no avail. Have done this many times on other macs with no problems.
Can edit files off the card, in CameraRaw, prior to 'copying' them, ie can 'save as' to the hard drive, so files seem okay on card, before I try to copy them using copy and paste.
Running OS 10.8.3 on a new macbook pro.
Rita,
The process for determining what is causing the files to be corrupt can be a tedious one depending on the following:
1. Can you review the images on your camera's LCD screen without problems? If not then the problem is most probably either a corrupted/faulty memory card or a faulty camera. If this is the case then your best bet at recovery (of sorts) is to use a program such as BrezzeBrowser from BreezeSys to extract the embedded jpeg versions of the corrupted RAW files from within each RAW file. Chances are, you won't manage to actually repair the corrupted RAW file but the jpegs are better than nothing.
2. If the images review ok on your camera but are corrupted when viewing on your computer and there seems to be no other problem with other files on your computer then it may be either a faulty card reader or usb/firewire cable between the card reader and the computer that is the culprit. Try the card reader with a different cable and also try a different card reader to determine the cause of the corruption.
3. If your symptoms are that you get different files corrupting over time when viewing them on your computer then the problem may be any one of either failing RAM memory, hard disk, hard disk controller or IDE/SATA hard disk cables. This is where the troubleshooting can be pretty tedious testing then eliminating each item from the list of suspicious pieces of hardware. Try the card and card reader on an altogether different computer to see if the files transfer correctly to that computer. If so then the problem lies with your computer hardware. If you haven't already done so at this stage, backup all your important data immediately (hopefully you keep backs anyway).
Hope this helps.
Similar Messages
-
when listening to music with my apple tv, I lose signal for a few seconds, then its okay and then I lose it again... any solutions ?
Hi there Iphone4fn,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
Hi, i have an Air but want to upgrade to the new model. How do i wipe the memory clean of my existing Air so i can sell it, and ensure when i get my new PC it automatically assumes the existing settings? Any help appreciated...
First of all, as a rule you should have two backups before you do anything else. (most don't, and it's up to you).
I would have one backup done as a Time Machine backup on an external disk, which you will use to import all settings, data and apps to your new MBA via Setup Assistant on your very first boot of the new machine.
Second, I would have prepared, a bootable backup done via Carbon Copy Cloner or Super Duper on a second external disk. This you can use for unforseen problems that might be evident on the Time Machine backup (hey it happens).
After you have these two items in preparation, then use the original system disk or flash drive to reformat and reinstall the original operating system to the old machine, cleanly. After that, it is ready for sale. If the unit is not an SSD equipped MBA, you can perform a secure wiping of the disk when you perform the reformatting.
To reiterate.... You need a good Time Machine Backup as a source for you setting up the new Mac with Setup Assistant. -
WHen I try to launch Firefox, a window appears saying it's can't establish a connection to the server at any of the web pages I request. Firefox recently upgraded and since then this has been happening. I have an internet connection with another browser, so it's not my internet service. I downloaded another copy of Firefox and it still does not work.
I have this problem too.
-
I bought an iphone 5 in Sept at Best Buy, after a few hours it lost power, so I returned it. Even the new one lost power after a few hours if left on. I do not have bluetooth on. I must always have it shut off now until I go to use it. Any suggestions? Is this normal?
Perhaps these suggestions will help:
http://www.apple.com/batteries/iphone.html
also
http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
One final unconfirmed possibility:
http://ipadnerds.com/fix-battery-drain-issue-ios-7/
Regards. -
I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdrisHave you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie -
HP LaserJet MFP M476dw paper size mismatch when copying or scanning from ADF
We have HP Color LaserJet MFP M476dw that has an issue when copying or scanning from the ADF.
Put a single A4 sheet in the ADF and choose copy, with all settings correct & no resizing, and the output copy is moved down the page (increased top marging by a couple of inches).
My initial thoughts were a paper size issue (e.g. treating A4 as Letter or vice versa) but all settings look correct. I have even done a reset and started over and the problem remains.
If I take the original and place it on the flatbed and copy from there with all the same settings then it works fine.
There is a similar issue when scanning from the ADF. Again, scanning from the flatbed works fine.
I've tried all I can think of. Does anyone have any further suggestions? Could it be a fault in the ADF?
Here's the full device settings info:
Device Configuration
[Shop for Supplies][Support]
Product Information
Product Name:
HP Color LaserJet MFP M476dw
Formatter Number:
YF10C9X
Serial Number:
CNB7G2H6T9
Service ID:
24113
Firmware Datecode:
20131122
Disable Fax:
No
Telecom Version:
05-031-001
Location:
UK
ADF Installed:
Yes
Max Monochrome Print Quality:
600x8
Max Color Print Quality:
ImageREt 3600
Controller Number:
72
Duplexer Version:
0
Device Description:
HP Color LaserJet MFP M476dw
Language:
English
Default Settings:
Self-managed
Asset Number:
Your Company Name:
Contact Person:
Device Location:
Geo Location:
Product Security:
Off
Wired HW Address:
fc:15:b4:78:28:46
Wireless HW Address:
54:35:30:2f:d7:fc
Network In Use:
Wired
Host Name:
NPI782846
IPv4 Address:
192.168.9.18
IPv6 Address:
FE80::FE15:B4FF:FE78:2846
Total Memory:
256 MBytes
Available Memory:
117.7 MBytes
Installed Personalities and Options
PCL6
(20040201)
AirPrint
PCL
(20040201)
PDF
(20040201)
PS
(20040201)
USB Flash Drive:
Empty
Impressions
Total Impressions:
10684
Monochrome Impressions:
4799
Color Impressions:
5885
Total Equivalent Impressions (A4/Letter):
10684.0
Monochrome Equivalent Impressions (A4/Letter):
4799.0
Color Equivalent Impressions (A4/Letter):
5885.0
Duplex Sheets:
1223
Jam Events:
0
Mispick Events:
4
Photo Color Impressions:
0
Photo Monochrome Impressions:
0
USB Flash Drive Insertions:
0
Images Scanned to USB Flash Drive:
0
Copy Flatbed Images Scanned:
373
Copy ADF Images Scanned:
409
Copy Monochrome Impressions:
1122
Copy Color Impressions:
102
ADF Images Scanned to Host:
0
Flatbed Images Scanned to Host:
0
Images Scanned to E-mail:
0
Images Scanned to Network Folder:
0
Fax ADF Images Scanned:
23
Fax Flatbed Images Scanned:
1
Fax Impressions:
18
Images Sent from PC:
0
ADF Images Scanned:
1149
Flatbed Images Scanned:
779
Scanner Jam Events:
8
Paper Settings
Default Paper Size:
A4
Default Paper Type:
Plain
Tray 1 Size:
A4
Tray 1 Type:
Letterhead
Tray 2 Size:
A4
Tray 2 Type:
Plain
Paper Out Action:
Wait Forever
Manual Feed:
Off
Duplex:
Off
Bind:
Long Edge
Print
Auto Continue:
Off
Number of Copies:
1
Courier Font:
Regular
Orientation:
Portrait
Monochrome RET:
On
Wide A4:
No
Monochrome Resolution:
600
Monochrome Bits per Pixel:
8
Color Resolution:
600
Color Bits per Pixel:
32
IO Timeout:
120 Seconds
Jam Recovery:
Auto
Personality:
Auto
Print PS Errors:
Off
USB Flash Drive
Print Documents:
Number of Copies:
1
Paper Size:
A4
Paper Type:
Plain
Fit to Page:
On
Collation:
Off
Output Color:
Color
Print Photos:
Image Size:
10 x 15 cm
Paper Size:
A4
Paper Type:
Plain
Lighter/Darker:
<-----*----->
Number of Copies:
1
Output Color:
Color
Scan Settings:
Scan Resolution:
150
Scan File Type:
PDF
Scan Paper Size:
A4
Flatbed Scanner:
Single Page
Document Feeder:
1-Sided
File Name Prefix:
scan
Output Color:
Color
Copy
Optimize:
Auto Select
Lighter/Darker:
<-----*----->
Paper Size:
A4
Paper Type:
Plain
Collation:
On
Number of Copies:
1
Reduce/Enlarge:
Original=100%
Draft Mode:
Off
Tray Select:
Auto Select
Two-Sided:
1-Sided to 1-Sided
Multi-Page Copy:
Off
Fax
Your Company Name:
HP Fax
Answer Mode:
Automatic
Rings to Answer:
2
Distinctive Ring:
All Rings
Dial Prefix:
Off
Fax Resolution:
Fine
Lighter/Darker:
<-----*----->
Fit to Page:
On
Glass Size:
A4
Dialing Mode:
Tone
Redial if Busy:
On
Redial if No Answer:
Off
Redial if Comm. Error:
On
Detect Dial Tone:
Off
Billing Codes:
Off
Extension Phone:
On
Stamp Faxes:
Off
Private Receive:
Off
Confirm Fax Number:
Off
Allow Fax Reprint:
Yes
Print Duplex:
Off
Fax/Tel Ring Time:
20
Fax Speed:
Fast (V.34)
Error Correction:
On
Forward Fax:
Off
Block Junk Faxes:
Off
Phone Line Volume:
Medium
Alarm Volume:
Medium
Ring Volume:
Medium
Key-Press Volume:
Medium
Fax Confirmation:
Never
Fax Error Report:
Never
Include First Page:
On
Auto Log Print:
On
Print T.30 Trace:
Never
Paper Types
Plain:
Normal
HP Matte 90g:
Normal2
HP Matte 105g:
Heavy
HP Matte 120g:
Card stock
HP Matte 150g:
Extra Heavy
HP Matte 200g:
Extra Heavy
HP Glossy 120g:
Glossy
HP Glossy 150g:
Glossy
HP Tri Glossy 150g:
Glossy
HP Glossy 200g:
Heavy Glossy
Light 60-74g:
Light
HP EcoSMART Lite:
Extra Light
Intermediate:
Normal2
Mid-Weight 96-110g:
Heavy
Heavy 111-130g:
Card stock
Extra Heavy 131-175g:
Extra Heavy
Hvy Glossy 111-130g:
Light Glossy
X-Hvy Glossy 131-175g:
Glossy
Card Glossy 176-220g:
Heavy Glossy
Color Transparency:
Transparency
Labels:
Label
Letterhead:
Normal
Envelope:
Envelope
Heavy Envelope:
Heavy Envelope
Preprinted:
Normal
Prepunched:
Normal
Colored:
Normal
Bond:
Heavy
Recycled:
Normal
Rough:
Heavy
Heavy Rough:
Heavy
HP Tough Paper:
Tough Paper
Opaque Film:
Tough Paper
Energy Settings
Sleep/Auto Off After:
30 Minutes
Wake on These Events
USB Job
Yes
LAN Job
Yes
Wireless Job
Yes
Control Panel
Yes
Fax Ring
Yes
Shut Down After:
Never
LaserJet Updates Settings
Check Automatically
Yes
Prompt Before Install
Yes
Allow Downgrade
Yes
Allow Updates
Yes
Miscellaneous
Extended print modes modified:
No
Very Low Setting (Black Cartridge):
Prompt
Very Low Setting (Color Cartridges):
Prompt
Low Threshold (Black Cartridge):
5%
Low Threshold (Cyan Cartridge):
3%
Low Threshold (Magenta Cartridge):
3%
Low Threshold (Yellow Cartridge):
3%
Store Usage Data:
On Supplies
USB Connection:
No
Font Source:
I (Internal)
Font Number:
23
Font Pitch:
10.00
Font Point Size:
12.00
Symbol Set:
PC-8
Form Length:
64 Lines
Append CR to LF:
NoTo get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)
Hi
As per the information and details provided by you, when you copy & paste a data from server to Outlook, word, notepad, then you do not receive the Chinese text.
For Outlook, please follow these steps: -
Close and reopen Outlook in your western locale (or switch the windows system to your Western locale if you changed that),
Manually change the message from Western to Chinese encoding, which you can do in all versions up to Outlook 2007.
If you want to stay in your Chinese locale in Outlook 2007, then:
After you hit reply, go to the Option tab > More Options.
In the Encoding drop-down menu, select the Chinese encoding you are working in (Not the encoding used by the person who will receive the message)
Note:
To set the Chinese locale in all versions up to 2007 the controls are under.
Tools > Options. In Outlook 2010 File tab > Options > Advanced > International options.
Unicode (UTF-8)
is a good setting for multilingual users.
Check the
Auto select 2007)/ Automatically select (2010) encoding box.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD
To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao. -
how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.
More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT. -
I recently replaced iPhoto with Aperture. When I download pics into Aperture they are place in a file that's called "Untitled Project." When I downloaded pics from my camera to iPhoto they were put in a file that was named with the download date (YYYY MM DD). Can I do that with Aperture (as the download default)?
My apologies.
When I import I have an Applescript that stores the images in a year month day folder-project structure so I haven;t used the default Aperture behavior in some time. When I tested it out to reply to you I was doing it from the file system and it picked up the date from the folder. mea culpa.
Anyway the closest you can get is to have Aperture split the images by date. IN the Aperture preferences set the project split granularity
Autosplit into Projects
and then in the import window set
Automatically split projects.
This will give projects named Month Day, Year (ie: Mar 13, 2012) there is no way to change this
As I said I have a script that runs on import and sets up a structure like:
Of course many here will say not to name projects this way, that Aperture has the ability to sort by date and you're better off naming projects something more meaningful. For them that is true and it might be for you also. For me I like to store my masters this way, it works for the way I shoot.
regards -
When I download videos (from an external hard drive), they appear to be downloaded (file sizes look correct) but they all stop playing a few minutes in!
Try the following in the terminal
ls -alh filename
du -chs filename
And what happens if you play the files directly of the external drive? -
When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?
This is typical of the default NEF RAW conversion of Aperture and the best thing you can do is set up a few presets to apply to all of your RAW images to get a tone curve and colors that is pleasing to you as a default. The in camera JPEGs / embedded JPEGs (that you first see during import) are treated to the Nikon "Picture Control" settings that are set on the camera - the RAW's as interpreted by Aperture are not.
I have written extensively and even have a few downloadable presets on my site - look for NEF...
http://photo.rwboyer.com/
RB -
hi i have just completed an imovie project and tried to save a hard copy on the desktop so i dragged the project file from the home page then movies folder and now the prioject seems to be lost , how can i get it back ?
It's a Finder feature, related to Quick Look. You can hit the space bar in the file list to get a preview.
If that doesn't work, you may have an issue witha preference file or similar. I find rebuilding the launch databse works quite well resilving tis kind of thing, as does trashing Finder preferences -
I am using a macbook air laptop, i trying to transfer my photoshop files from my macbook desktop to my laptop but it comes up with Error: 1 and advises me to contact adobe support for help.
Are you referencing your Photoshop image files, or Photoshop application files?
If the latter, cease and desist at once!
Always install Photoshop from scratch, from the original media: CD/DVD or download.
If the former, please provide details:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
firefox 9 wasn't this slow when i first got it but nothing seems to help. i have uninstalled an reinstalled many times but it hasn't helped when i try to go to another site my activity icon just spins for minutes and sometimes it never loads. i wish
-
How to create user groups in SAP
Hello Gurus, Can anyone let me know how to create user groups in SAP-HR Module and who will be creating the user groups. plz provide me the steps.
-
Is there a plug-in to correct converging verticals?
I sometimes need to correct converging vertical lines in images (buildings, for example). I use Photoshop Elements but I would like to be able to do this in Aperture. Is there a plug-in application out there that can do this, please? There are plug-i
-
We want to make some changes in screen layout for goods receipt for purchase order as well as outbound delivery using MIGO transaction. we want to keep material code just beside the material description. Plz suggest the process flow and transaction c
-
How to clear my USA i tunes balance now I live in the UK?
I am struggling to clear a debt of $20 from my USA i-tunes account as I now live in the UK and have no USA credit cards and my old USA Pay Pal account is closed. I have a new Pay Pal account in the UK, which i-tunes wont accept. I cannot change the c