When creating Certificate request what settings for POP IMAP

when Creating a request for Certificate POP and IMAP are in the list along with autodiscover etc
default value is Server Host name ie. EXCH2013
what should these be set to ?
I'm configuring remote.mydomain.com - should I set these to remote.mydomain.com ?
JK

it depends... you can set up same name as your SMTP service or if you want different name for pop/IMAP like webmail or smthing else then you can go for that.
I generally use the same as enabling POP/IMAP is very less required on ex so i just enable the service keeping the URL same so that you save or SSL name also
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Similar Messages

  • Error when creating transport request in Charm for Portal

    Hello Guru's,
    I'm configuring ChaRM for our Portal environment using CTS+
    When I create a transport request I get the following error message:
    Parameter EPD not in version of tp configuration.
    Any thoughts????
    Regards,
    David

    Hello David,
    Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
    1107361 - Migration BAdI-Implementation Error Message XT 465
    45548   - Transporting language-dependent objects
    Hope this helps you out!
    Thanks,
    Mark

  • Could not create certificate request

    jdev version: 10.1.2.3.0
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
    PL/SQL Release 10.2.0.4.0 - Production
    TNS for Linux: Version 10.2.0.4.0 - Production
    How can i create a certificate signing request like that:
    CN=EURTRANSBEL
    OU=ICT 4.2 ORACLE
    O=SPF AFFAIRES ETRANGERES
    L=BRUXELLES
    ST=BRABANT FLAMAND
    C=BE
    SN=020100303
    E=[email protected]
    In oracle wallet manager(new signing request, advance and there i put the DN),
    when i create a certificate signing request like that it's said "could not create certificate request...."
    When i try to put a Dn like that:
    CN=EURTRANSBEL, OU=ICT 4.2 ORACLE, O=SPF AFFAIRES ETRANGERES, L=BRUXELLES, ST=BRABANT FLAMAND, C=BE
    it work fine, but when i only add the SN like that:
    CN=EURTRANSBEL, OU=ICT 4.2 ORACLE, O=SPF AFFAIRES ETRANGERES, L=BRUXELLES, ST=BRABANT FLAMAND, C=BE, SN=020100303
    it crash.
    How can i do.
    Thanks in advance
    Edited by: Malebodja on Mar 3, 2010 6:28 AM

    You are making the dn manual? Or you are filling the form?
    Why dont you try to run it in a windows Machine, install the Database client and it includes a Wallet Manager. I never seen a problem like you mentioned I've done this in Linux, Unix and Windows and haven't had any problem unless there is a missconfiguration or bad installation.
    Greetings

  • Why is my mail certificate for POP IMAP rejected?

    I am running 10.6 server with the latest updates and suddenly I noticed that my mail account stopped working. When I investigated the issue it looks like that my SSL certificate in the server admin under mail -> security is gone. there are two fields for enabling SSL, one for SMTP-SSL where my certificate still shows up and is working just fine and the other one for IMAP and POP SSL shows 'no certificate'.
    When I try to chose my certificate from the pulldown menu and click save, it takes a couple of seconds to save the status and then jump back to showing 'no certificate'.
    when disabling ssl the mail server works as intended. changing or adding certificates with the certadmin also failed. maybe someone else has an idea on how to get the server-admin to use a certificate for the imap-pop-ssl again.
    thanks.

    after googling around for quite some time was about to give up but then i stumbled onto some threads with the same problem.
    one suggested to reinstall and set the server up clean from the beginning again, which wasnt really an option but there was one comment to it that helped me to find the solution. the person suggested to point the dovecot.conf file (located at /etc/dovecot/) to the /etc/certificates folder again. that was not quite the solution for me, but maybe it helps someone else.
    what did the trick for me was actually to manually solve a bug from server-admin in the dovecot.conf file at /etc/dovecot. be sure to make a backup of the file first before you do any editing. if you change something in server-admin with your mail server and certificates, the server admin tends to append things to the dovecot.conf rather than replace the old text in there. so what you end up with is a long and messed up dovecot.conf file. in the dovecot.conf file is a section for ssl_ca_file, ssl_key_file and ssl_cert_file where only one term should stand, rather than multiple things. by deleting the unnecessary additions created by server-admin, or deleting everything the equal sign (after ssl_ca_file =) and then pointing the server-admin to the right certificate again, you may get rid of this bug.
    this is the thread that helped me find this out: https://discussions.apple.com/thread/2291114?threadID=2291114
    thanks

  • Error when creating transport request in 000 clinet

    Hi All,
    I am getting the below message when creating a transport request manually in 000 client
    Requests can only be created from ChaRM!
    Message no. 38001
    How can I deactivate charm for short time and then activate it again?
    Please let me know your suggestion.
    Thanks
    Amair

    Hi Sanjai,
    Thanks for the quick response.
    But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
    Thanks again
    Amair

  • Create Service Request to open for the incident number we pass

    I want to call open Service Request form(Form:CSXSRISR) with details of incident number already loaded.
    I am trying to pass parameters like request_id, p_incident_id ,... When the form opens it says no such parameter is there. Is there any way to open a create service request form with the service request loaded for the incident number we pass

    Hi Joaquin,
    Thank you for answering. I already tried: I select the line with the email in the Inbox, I press Interact (the account is automatically recognized and I am asked to confirm it), I confirm the account and then I navigate to "Service Request" workcenter: a new Service Request is displayed, with the employee responsible and the customer automatically filled. However, I can see no data regarding any attached email in any of the Service Request tabs (even if I save or select "End").
    After your answer, I tried the same procedure with the "Service Ticket" and noticed that the email is correctly displayed as an Interaction Record under the Business Content tab for the Service Ticket: since you confirmed that this should work also for Service Request, I guess there's something wrong in my customizing settings and now I will search for errors.
    Thanks for your help.
    Best regards,
    Laura.

  • Stuck on "Select Users" on Target Selection when creating a request

    Hey guys,
    I created a custom request template based off of the "Modify Self Profile" template. When a user tries to create a request based off that template, OIM Self Service asks to "Select Users" on the Target Selection step.
    Unfortunately, No users are available to select. And I really only want to modify the logged in user anyway.
    Any thoughts?
    Thanks.
    Edited by: 951612 on Aug 17, 2012 1:01 PM

    Shira,
    Sorry, just re-read your post. Am I correct in thinking that you want to use the Controllers assigned within SPM to act as the approvers in CUP?
    If so, what support pack version are you on as I believe that this only works in SP08 due to a technical bug. This also impacts the SPM Owners acting as approvers.
    You may also wish to check the connectors and authorisations of the connector IDs as without being able to read the tables, the approvers may not be found.
    Simon
    Edited by: Simon P Persin on Nov 16, 2009 4:37 PM

  • What settings for Blueray ?

    I have a Sony HDR-HC3 and I want to know what settings to export for compatable HD playback for blueray? I plan on getting a PS3.
    Is it H.264 at 1920x1080 ?
    Any help would be great.

    http://www.blu-ray.com/faq/#blurayvideocodecs
    You'll also need some third party software help. MPEG Streamclip (free) to create the MPEG-2 files and Apple's QuickTime MPEG-2 Playback Component ($20).

  • Creating certificate in ms-word for training and event management  sap hr

    hi, everybody, i used ole programming,to create certificate for attendee but i need to save in perticular directory,but all files are opening ,could anybody tell how to save in a perticular directory instead opening every file.

    upgraded SAP Frontend from 4.6c to 4.6d.

  • Error when creating a request Template In OIM

    Hello all,
    I have a very strange issue with OIM, it is when I try to create a request template, and put a restriction in Organization field, it creates the template and everything is fine. Suddenly, when I try to edit this template, the OIM shows a window with the next error:
    ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
    I have found in other posts the "solution", It is to change in the database -> RequestTemplate Table -> Template Data Column, the restriction Organization from "the name of the organization" to "the Id of the organization", and restart the OIM, so after that, I can edit the template.
    Here is the issue that I don't understand,... few hours after, I want to edit the same template, and the OIM again shows the same error:
    ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
    And if I review in the database the table, in the Template Data Column, the restriction of Organization has AGAIN the "Name of the organization".
    And I can again change that to the "Id of the organization", but it's time lost restarting the OIM. Time that I don't have, because Its more than one template.
    Please somebody could help me with this issue.

    Hello,
    I already found the solution to this issue.
    I had to restart the OIM server but also the DataBase and after that, this problem was solved.
    Thanks anyway.

  • Error when creating Travel request

    Hi all,
        I am encountering error "Percentage is too high" when creating a travel request. When i tried to change the cost centre to split into different entries.
    Ex: 1) 10 %   cost centre1
          2) 40%    cost centre2
          3) 50%    cost centre2
    when i try to save the request i encountered error with "Percentage 90% is too high" as the first entry is reverting back to the initial entry before modification(initial entry is 100% with cost centre1) it is reverting back the first entry as 1) 100 %   cost centre1 that means now the entries are becoming
    Ex: 1) 100 %   cost centre1
          2) 40%    cost centre2
          3) 50%    cost centre2
       altogether 190% so throwing an error with "Percentage 90% is too high" as the total percentage is more than 100%.
    Can you please help in resolving this issue.

    hi,
    see this link
    Percentage Overhead Rates are not capture with Transport request
    refer this link to know how to create travel reaquest
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51f0e994b85e40e10000000a11466f/content.htm
    http://help.sap.com/saphelp_45b/helpdata/en/b6/cdaab649e911d189060000e8322f96/frameset.htm
    thanks

  • What settings for .mov

    Hello I've got a 8.7GB .mov video file here and my DVD are only 4.7GBs.
    I've got about 7 videos this size that I need to burn onto DVDs. I'm curious what settings you would choose to complete this task.
    If at all possible I'd like to not have to end up with two files (1 for video and 1 for sound)
    Thanks a bunch!

    Hello RcBro,
    Depends. What are you going to use the file for? Archival? DVD player playback? Web streaming/download?
    One thing I can answer definitively is that you will not end up with elementary stream files of any kind (separate audio/video files), for any of the above destinations anyway.
    You have several options. Since you did not mention a DVD-9, I will spare you those details.
    I am sure the kind people on this board will help you if you provide a little more information, such as:
    -program duration
    -final deliverable/use
    The size description you gave us really tells us nothing. It might be a uncompressed trailer or a highly compressed feature. With more information, we can give you optimal advice.
    Please let us know.
    Mikey M.

  • Changing Mail Server Settings for Other IMAP

    Hello,
             I'm an Admin for a treatment center and one of our psychiatrists has a BB Tour. He asked me the other day if I could set up his email account on our exchange server for him on his phone. Going through the mail setup wizard I selected "Other" account and set it up for IMAP and then it asked me for his email address and password. It took the domain name and then assumed the mail server names were as such. Now in a perfect world, this wouldnt be an issue. I recently took over for a complete moron and this guy has our MX records pointing to a 3rd party company where all of our outside emails go and then the Outlook clients are set up to pop this box in addition to the Exchange setup (I know its totally lame). What Ive done for everyone else is just setup a IMAP account using the server IP address and mail works fine for them. I cannot for the life of me find where I can actually edit the mail server names for the IMAP account I create on his BB Tour. Is this a limitation the phone? Or am I not looking in the right place. Thanks!
    Solved!
    Go to Solution.

    Yup -- refer back to my first reply where I said to use the carrier BIS website...while I didn't say it quite so clearly, I did not say to use the on-device email setup wizards.
    The device interface to BIS (aka email setup wizards) and the carrier website interface to BIS have subtle differences. For what you need to do, you need to use the carrier website from a PC/browser. Here is the link:
    https://bis.na.blackberry.com/html?brand=vzw
    If you have not yet created BIS credentials, you will need to. I find it easier to first create those on the device interface and then use them in the web interface. Afterwards, you will have to use the credentials in the device interface, but there is a "remember me" box so you will only have to enter them once.
    Personally, I rarely use the device interface...a full keyboard, mouse, and monitor are so much simpler for doing things than a tiny BB screen/keyboard. But that's just me.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IBase When Creating a Request for Change in Solution Manager 7.1

    Hello all,
    We recenlty upgraded our sandbox system to Solution Manager 7.1 SP3 and are currently investigating the new ChaRM functionality with the new CRM UI. Our company had configured ChaRM back in 2007 and has been working very well since the initial delivery.
    While I was following the Request for [Change process simulation from RKT|https://websmp208.sap-ag.de/~sapidb/011000358700000478022011E/index.htm] on our sandbox system, I had noticed that the iBase and Component that we have  created in transaction IB52 prior to the upgrade were not showing in our search when we were defining the Change Request Scope section. In the documentation that I have read leading up to the upgrade, there have been no mention of the iBase/Component data becoming invalid post-upgrade nor have I found a conversion process.  I have done a search here on SDN and on SAP Notes to see why the iBase and Components were not showing up.
    Has anybody encountered this issue since the upgrade to 7.1 or is there something I need to do in IB52 in order for the iBase/Component in the new CRM GUI?
    Your assistance in this matter would be greatly appreciated.

    Hi,
    yes in 7.0 it worked for me too, that is because in 7.0 ChaRM searched for projects based on the IBase you selected.
    If there were more than one project where this system is involved you got a pop up where to chose your project.
    In 7.1 you chose the project directly, instead of let the system search for you.
    And depending on what productive-systems are in this project you get your Ibase list.
    If you don't select a project at all you will still get a list of all Ibases in your system.
    Iif you ask the SAP, they will allways tell you that you have to have a productive system in your project, at least as you pointed out with a virtual system.
    I did not read i t though and therfore ca nnot provide any sources.
    This is all based on my experiences.
    Best Regards
    Daniel
    Edited by: Daniel Titze on Nov 23, 2011 6:16 PM

  • Error when creating transport request for transfer rules

    Hi
    When we are creating the transport request it is giving the Warning 1."source system are not transported.
         Error  2." you can't use request BQAK900164
         Error  3."object ISTS Zevkkn_bb could not be saved 
                   to order BQAK900164.
    This is very urgent.
    Please reply soon.
    Thanks in Advance,
    Regards
    Pankaj Angra

    Hi,
    Did you replicate the data source?. That could be the problem or there might be problem you have set up the source system on your BW system
    make sure that the source system names are mapped from your R/3 dev to your R/3 QA. This is done on the BW QA (target system) RSA1 => Tools => mapping of source system names. make sure your entries are there for the logical system names of your dev to qa.
    Then in the BW dev, when selecting the trasnfer rule make sure to select the appropriate source system. (souce system icon in tool bar)
    Do u hav 2 Source sys ?
    -Shreya

Maybe you are looking for