When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground?

When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground? I have two signals and I want to show one overlayed on top of the other. Right now Diadem will only graph it the other way around. I have tried deleting the curves and re-adding them in differnt orders, changin the order they are in the curve list, changing their order inthe data portal, right clicking on the curve and selecting "move to forground" (this only moves the entire 2-d graph object to the foreground). Im using Diadem 12.0 Basic.
Solved!
Go to Solution.

Hello Joe,
I figured out what causes your curves to draw in the wrong "order".
You are using two Y-axes, and DIAdem always draws the data for Y1 before Y2, no matter what the order of the curves is in the "Curve and Axis Definition" dialog.
I am attaching your layout with a small modification, I changed the Y1 and Y2 axis order (I swapped which Y-axis the data is displayed on), and I get the following result:
Once I looked at your layout it became clear why the order of the curves didn't reflect the order in which the curves were drawn. I didn't know this - so I just learned something new here as well.
I hope this answers your question, feel free to ask if there is anything else I can help you with.
      Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Modified Report Layout.TDR ‏146 KB

Similar Messages

  • Display multiple spreadsheet on one XY Graph

    Hello 
    How can i display multiple spreadseet on one XY Graph ?
    i'm using this method for single file :

    This is what i have done 
    it's really intresting that The color of the plots automatically got changed 
    as you see here address is constant and number of file too.
    now i'm working on user just select the folder and the code automatically display all file in the folder .
     

  • The sort field is not used when ordering multiple cds in one alumn folder, how do I correct this?

    It is using the track number and not the sort order field.  The reason I have multiple cds in one alumn is because they are books on cd.

    Sorry for the typo my "b" key was not working correctly.
    The sort field is not used when ordering multiple cds in one albumn folder, how do I correct this?  It is using the track number and not the sort order field.  The reason I have multiple cds in one albumn is because they are books on cd.

  • How do you isolate an album or artist in the new iTunes? (12.0) It is really frustrating when trying to listen to one album and I get the album in the list with all 1,025 other albums in my library.

    How do you isolate an album or artist in the new iTunes? (12.0) It is really frustrating when trying to listen to one album and I get the album in the list with all 1,025 other albums in my library. Same with the artist.

    Welcome to the  Discussion Forums
    ... I assumed that if I played the 1st track, it would continue to play the rest of the album (as iTunes does on my Macs and PCs),...
    You assumed correctly, and it should continue to play the rest of the album in order. Does this happen to all your albums. Have you tried restarting the tv.

  • I have two different accounts on my iMac 2011 OSX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

    I have two different accounts on my iMac 2011 OCX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

    I have 2 users on the imac. when entering text in the first account it is duplicated in the second

  • I have 3 i phones.  Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

    I have 3 i phones.  Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

    My daughter and I both have iphones. I created an account (not separate itunes) for her on my computer so she could sync her phone/itunes but not have it interfere with mine since we have WAY different taste in music. Creating a different computer profile should work if you have separate itunes accounts, too.
    If you all use the same itunes account, you can turn on Home Sharing. That way you can all download the same content without having to pay for it again. Not sure how or if that works with separate itunes accounts.
    Hope that helps!

  • I have 2 iPads. When downloading an app on one, it also appears on the other. I don't want to create a second iTunes account. How do I stop this?

    I have 2 iPads. When downloading an app on one, it also appears on the other. I don't want to create a second iTunes account. How do I stop this?

    On the device you do not want the auto downloads to be installed on: Settings/iTunes & App Store. Deselect what you do not want to be automatically downloaded.

  • I had bookmarks on an older computer. When I got my new one my husband took over the old one and deleted firefox before I had a chance to get my bookmarks. Is there anyway to find all those bookmarks I had?

    I had bookmarks on an older computer. When I got my new one my husband took over the old one and deleted firefox before I had a chance to get my bookmarks. Is there anyway to find all those bookmarks I had?

    Hopefully he didn't delete the Firefox Profile folder. <br />
    http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Is it normal for a waveform graph to truncate arrays of values that are longer than others when displaying multiple waveforms on the same graph?

    I am reading back values of several waveforms that were saved to disk using the write to spreadsheet vi. Some of the data sets are longer than others eg. 35 seconds vs 45 seconds. All have the same sample rate.
    See the code segment below. If I select the larger files first then all the data will show. If I select a smaller file first the larger ones will be truncated to the size of the small file. I am using LV 7.0.
    Attachments:
    codesnippet.vi ‏41 KB

    I needed to make some grammatical/ nomelclature changes, But, Could not edit the previous post.
    so posting again
    "Thats because you are inserting into an array of a predefined size.
    For ex,
    When you try inseting a 1D array 'A' of 50 elements as row 1 of a  2 D array of 40 elements(in row 0 ), only only the first 40 elements will get insetred into 2 D array. You lose the last 10 elements of array 'A'
    To avoid this, I suggest you use XY graph( of course you have to create an x axis with the index of each element in the inserted array and plot on xy graph).
    Any doubts, do get back"
    regards
    Dev

  • How do I turn off automatic bookmark creation when combining multiple PDFs into one?

    When I combine multiple PDFs into one, I need Adobe to use the CUSTOM bookmarks I created in the original PDFs. I do NOT want the additional PDF name as a bookmark in this instance. Is there a way to turn this option OFF in Acrobat Professional? I have version 9.

    You can not automatically turn off this action nor can you remove the 'file_name.pdf' heading, but you could add a button or menuitem to remove the 'file_name.pdf' from the bookamarks. Yes, it is one more step to perform when combining PDFs, but is you want until you have all of the PDFs combined you only need do it once.
    Removing filename bookmarks created by Acrobat by Sean Stewart
    From the above article:
    "With the release of Acrobat 6 came the ability to create a composite (binder) document from multiple files, (i.e. File > Create PDF > From Multiple Files.) When this is done, Acrobat automatically inserts a new top level bookmark at the start of each new file. The bookmark title will correspond to the source filename of the source file. While this level of separation can be helpful, it is counterproductive when the user wants the bookmark tree in the merged document to be continuous.
    "Here's a sample JavaScript to remove the top level bookmarks from the bookmark tree. This script will look for a ".pdf" extension to decide whether to remove the bookmark."
    With some additional coding you can add menu item or toolbar button.

  • Reducing margins when printing multiple pages on one sheet

    When I print a pdf document from Preview, a document from Pages, or from any other application and select the Layout-> Pages Per Sheet as 2, 4, or more, very large margins are put around each sheet and between the pages on the sheet. If these margins could be reduced, the print size would be bigger. Is there any way to reduce these margins (say down to 1cm or so)?

    I figured out a way to reduce the margins. You can do it quickly by choosing Scale to Fit-> Fill Entire Paper, from the Preview settings in the print dialog box. You can also increase the scaling to make the writing fill up more of the page manually by choosing Scale -> and putting a higher percent. The preview window is helpful in showing what it will look like.

  • I am having trouble with my bookmark bar changing order between my devices. I have them organized for convenience, but when I arrange them on one device they change on the others to a different order. how can I fix this?

    I have 2 desktops and a laptops connected by Firefox sync which I set up at some time during the beta. I have several folders, dividers, and bookmarks on the toolbar which I try to keep organized based on their use (web design, hardware/tech support sites, personal, etc) but when I arrange them on one computer it screws them up on the others. I would like for it either to keep them in the same order on all machines, or at least have to arrange them on each machine separately without them affecting the other so they stay where I put them. Does anyone know how I can accomplish this?

    This is what I'd suggest get your machines matched. Sync your machines so all data is on both. Then pick one to get all of your organizing as you want it. (or do this before you even setup sync) Then, when you do your initial sync from that organized machine, select: replace all other devices with this computers data. (you can also do that as Manage Account > reset sync.
    After that, changes in order on one machine should be reflected on the other. Remember though Sync '''merges ''' the data from your machines. If you work on two machines side by side and make order changes on both without syncing either, once you do sync, Sync will have to again figure out how to merge the incongruities, which may not be what you expect.. Be careful, if order is important to you.

  • When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

    while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

    I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
    "How do I text message multiple people at once?"
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html
    Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
    (If this has answered your question, please mark your original post as answered)

  • When selecting multiple images in LR 5.2 on Mac, how do I delete all selected photos?

    Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
    Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
    When selecting multiple images in LR 5.2 RC on my Mac, using the Filmstrip view, how do I delete all selected files using a shortcut (as opposed to the right-click context-menu > remove selected photos)? Details: Using backspace asks me if I want to delete it, I choose from disk, but it just deletes individual photos, so if I have 3 selected, I need to do this 3 times.

    Many users (including me) will thank you for saving us the trouble of looking for this description in the manual. Seriously!
    However, if something performs unexpectedly, if it's not a bug, it's at least a user-inconvenience.
    When an unexpected result like this occurs in a product, often the documentation writer is given the task of writing the workaround into the docs. That's not a great way to fix bugs permanently, even if it does help in the short term. So, it's probably a good idea to point to where in the documentation it seems that the product-performance problem is smoothed over, when filing the report/request.
    Feature enhancement requests and bugs are filed the same way. And, developers do listen to requests. Many features in many Adobe products originated in feature requests. However, product managers and, financial-management folks above them, who have some power to decide where to expend resources, set the priorities. Adobe's new subscription model is supposed to release some of the pressure on developers to meet a new release deadline every-so-often, where a whole bunch of product improvements is revealed, and instead, under the idea of making constant improvements available through more-frequent updates, users will get results sooner.
    dj_paige wrote:
    peter at knowhowpro wrote:
    Have you considered filing a bug report or feature enhanacement request (depends if the develoopers think it's a bug or "as designed") here: LR-WISHFORM
    As far as I know, this is not a bug, this is a feature of Lightroom (although I can't explain why anyone would want Lightroom to operate this way). You can find text in the Lightroom Manual that clearly explains tha operations performed on selection of photos in the Filmstrip is different than the same operation performed on photos selected in the Grid.

  • "Reader" will only display a PDF for one second, then suts down the PDF.

    I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF.  This happens to all PDFs no matter what the scource.  I am running Windows 7.  What do I need to do to correct the situation.  (Yes -- I deleted "Reader" from my computer, the re-installed it.  Didn't help.)

    Go to C/Programs/Adobe/Reader 11/Reader.
    Look for a file named eula.exe (or just eula).
    Double click it.
    Accept the license agreement.
    Reader should work fine from there.

Maybe you are looking for

  • Very Urgent: how to define field symbols in class using se24 Points assured

    hi all I am new to abap oo programming. I am using se24 to build a class where some methods have code which involves working with field sybmols but i am not able to figure out way for how to define field symbols in the attributes section. I tried def

  • Idvd 08 encoding

    My idvd only lets me encode files as best performance instead of professional quality which takes up less space. Usually i wouldn't mind except i now have to buy more expensive dvd's that hold more capacity and ideas on how to burn at high or profess

  • How to find out where movie clips are used?

    When I look at FLA project tree, I see Use Count column next to a movie clip. How do I find where this movie clip is used?

  • Code Inspector Error Code MESSAGEG_H

    Hello Guys, I'm running code inspector and in Syntax check/Generation and subdivision suspect conversions, am getting an error called "Truncation in the Conversion from ABAP type 'C'(length 64 ->20). While I understand what the error is about...i don

  • Filter mapping problems

    Hi everyone, I'm writing some servlet filters. I've written a test filter, but am having trouble getting it to map correctly. I'm using Tomcat 4.0.4 on Windows 2000. I can get it to map to any JSP file like this (in web.xml): <filter-mapping>   <filt


HashFlare