When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this??  Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there?   Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

Similar Messages

  • My mac book pro just stopped allowing sound and when i restarted it, it does not let me use any of the icons on the desktop, then allows me to use them after 3 minutes,and then still NO SOUND! What do i do? PLEASE help.

    I have an issue with my computer.  the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011.  so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out.  When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT  it is a light gray color and it does not let me check the setting off.  please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
    *******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************

    That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
    Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
    Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
    Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

  • When exporting project, result file does not work 100%

    My version: CS4 Premiere Pro
    My set up: Vista Ultimate 32bit, 8GBRAM, NVidia Quadro FX 5600 Driver v: 191.78
    My issue:
    I have a footage of about 2.5 hours. It is a seminar I recorded. It was recorded on a Sony Handycam CX-100 HD camera. I want to export my project to H.264 format so the client can take a look at the footage and provide cue points for editing.
    The only thing I added to the video was timecode for the client set cue points. When I export project I select H.264 and save it as Hight DV quality 720x480.
    My problem is that when Encore finish processign the video, I open it to check if it is working and I find that after minute 40 the video frezees and I can only hear audio.
    What is wrong? Am I forgetting a setting before saving the video? If I save the video on a Windows format, it plays ok.
    Can anyone provide help.
    Much appreciated. Thx

    Is there anyone who may be able to help me?
    Please. Thx.

  • When I place photos on the cloud to share with friends, the photo IDinformation I have entered with the photo does not transfer.  Is there a way to have the text follow the photo in the cloud?

    When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo.  Is there a setting I am missing that would allow the text to go along with the photograph?

    The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.

  • One of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

    one of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

    If you are a resident of the U.S, have iTunes 10.3, iOS 4.3.3, you can re download apps for free directly on the iPad.
    Tap the App Store icon, find the app: download
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • FormCentral PDF export: Drop-Down Menu does not print when no choice is made

    FormCentral PDF export: Drop-Down Menu does not print when no choice is made
    I want to be able to print a blank form for the older clients who cannot use a computer. Form has a few drop-down menus and they only appear on the print out if an option is selected. The form was created on FormCentral. Can anybody help?
    Sorry if i'm a noob, not much experience in creating PDF forms yet.
    Thanks for your help,
    Yon

    Hi Perry
    I am using the trial version of Adobe Acrobat and am using the provided FormCentral software to create the form. I find it very limited, but easier to learn. I am creating a financial needs analyser.
    The section of the drop down menu is a selection from 1-5 (rating of importance for financial goals). I want to print out the questions and the empty boxes for people to fill them in by hand (e.g write 1, 2, 3, 4, or 5). When I leave a blank choice, no box is printed out. I write the questions in formatted text and leave the text/caption for the drop-down as blank, as it is difficult to set the margins correctly so various elements align (I pretty much have to estimate).
    As said before, I may have been missing a massive part of the software, but I haven't used any training - just going by instinct so far.
    Do you know if I can do anything about it?
    Thanks,
    Yon

  • When I transfer a playlist which I modified song ending times, it does not transfer to idvd project. Any suggestions?

    When I transfer a playlist, where I modified the songs ending times, it does not transfer as edited to my idvd slide show project. It reverts back to original song times. I am trying to edit songs to match slide show segments.
    Any suggestions?

    Use Garageband to edit the songs. Save them as new files for use with your slide show.  The modifications made in iTunes do not modify the song files, they only tell iTunes how to play the songs.

  • The information on my sim card does not transfer when i run isync

    macbook   Mac OS X (10.4.9)   The information on my sim card does not transfer when i run isync everthig else works fine . i have a nokia 6103

    Welcome to Apple Discussions.
    There's nothing unusual about that, as the SIM standard is not written to support external data exchanges. In order to synchronize your SIM-stored data, you must first copy or move each contact record into the memory location on your device reserved for contact records not stored on the SIM.

  • When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

    When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

    Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
    http://support.apple.com/kb/HT1808
    Hope this helps
    - Greg

  • When I download a video, the sound does not transfer with video. I use elements 12

    I've been using elements 8 for several years and have just downloaded 12. When I download a video, the sound does not transfer. What am I doing wrong. Dan Broughton

    This is the Photoshop Elements forum.  Did you mean to post in the Premiere Elements forum?
    http://forums.adobe.com/community/premiere_elements

  • I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success.

    I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success. Do I have to use iCloud for 800 vacation photos or re-enter all the data after transfer? 

    There is no support for mirroring or syncing iPhoto libraries or Aperture libraries.  You can however export partial Aperture libraries on one mac and merge them into other libraries on a second Mac.
    To transfer your edited photos open your photolibrary in Aperture and and collect the edited photos in an album. Then select the album and use the command "File export > Album as new library". This will export all edited photos as a new Aperture library. Copy this library to your other Mac and import it with "File < Import > Library to your other photolibrary on that computer (assuming you are having the same Aperture version on both macs). When merging the new library into your Aperture library, opt to keep the newer versions from the imported library.  iPhoto 9.5.1 will be able to open these merged Aperture 3.5.1 libraries.

  • Song purchased from itunes wifi does not transfer back to pc in manual mode

    Hi one and all....heres a little poser. brought a song from itunes (wifi) but it does not transfer to itunes on the pc when I hook up my ipod touch. I have to manually fill my pod as I have to much groovy music. When I check the music on the pod its there but it does not show when I link it up to itunes...so I cannot even drag it into my music folder..I expect it would work if I was in full sycn mode but too much music . Any ideas??
    cheers
    mark

    I purchased songs on two different iTouches at different times. Both iTouches had the same device name. Now I have two Purchased on folders with the same name, each with their respective songs purchased on the seperate iTouches. It looks a little weird.

  • Podcast image does not transfer to iPod

    I publish a podcast, hosted by Podbean, and when I publish an episode, the image is displayed only in the iTunes player. It does not display with the Podcast in the Podcast Library in iTunes on my PC, nor does it transfer to my iPod. Evidently the image IS "transferred" to iTunes when iTunes picks up the new episode, but it does NOT "transfer" from iTunes to the downloader's machine or iPod. Any ideas of a setting I may be missing, or anything I may be doing wrong?
    If it would help to look at the podcasts, they are (1) Alien Nation Student Ministries with Pastor Rob Deveney and (2)NUnity Church of God with Pastor George Moxley.
    Thanks for any help!

    New info: the artwork IS there when I download directly to my iPod. My issue is obviously with iTunes on my PC. That's better; I was worreid no one who downloaded the podcasts would have the images, but evidently they will if they download direct to iPod. Meanwhile, I'd still like to know what's up with transfers from iTunes to iPod.

  • PDP - BBP_EXTREQ_TRANSFER does not transfer PRs

    Dear SRM Gurus,
    we are trying to move R/3 requisitions up to SRM (4.0, Classic). PRs are getting into the transfer table, but the report BBP_EXTREQ_TRANSFER does not transfer the PRs.
    Does anyone of you have insights into this report and how it should work?
    Thanks,
    Claudia

    Thanks for your replies!
    The settings are done like described. The RFC User is maintained in the Org Model as well as the user for "Entry Channel". I am not sure, if I am missing something there.
    I have a PR in the table and now I want to move the PR to SRM. Running the report manually does not move anything. When the job is scheduled using the RFC User, the job is stuck in Outbound Queue giving error "No authorization to log into target system". Any idea?
    I also do not know where the PR is technically moved into SRM?
    Looking forward to you insights!
    Thanks,
    Claudia

  • I am trying to transfer my itunes library from my old Mac to my new Mac; however, all that transfers is the music I downloaded from itunes.  It does not transfer the music I downloaded from my cd's.

    How do I transfer my itunes library from my old Mac to my new Mac?  When I try all that transfers is what I downloaded from Itunes.  It does not transfer the music I downloaded from my cd's/.

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the iTunes Library.itl file in the moved iTunes folder.
    For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168 
    Windows users see tip at: https://discussions.apple.com/message/18879381
    2011 Transferring your iTunes library - http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/  - An article with good background information, particularly if you are not sure your media files are all grouped for quick  solution above. Unfortunately it uses the single term "transferring library" for two very different moves; relocating just your media (not recommended unless you really need this configuration) and relocating media+database (really your whole "library").  Make sure you understand the difference before electing to move only media.
    If you put it in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

Maybe you are looking for