When I add a new contact number to my iphone 5c and I try to select the iphone choice is not showing up; and it was working fine the day before. ?
when I add a new contact number to my iphone 5c and I try to select the iphone choice is not showing up; and it was working fine the day before. ?Also when I try to send an imessage is not going trough as an imessage, it makes me send it as a message.
You're using Exchange Active Sync to synchronize contacts and calendars with your company Exchange Server. If the default calendar/address books are set to the Exchange account, it will sync automatically. This is normal.
Go to Settings>Mail, Contacts, Calendars to change the default address book and calendars to a something else, iCloud or something synced from your home computer instead.
Similar Messages
-
when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
How many contacts can i stored in iphone4s?because I lost old contacts when I add in new contact.
How many contacts can i stored in iphone4s?because I lost old contacts when I add in new contact.
This do not solve my problem of Why I lost old contacts when I add in new contacts?
-
Iphone4s keyboard doesn't appear when I add a new contact after receiving a call
iphone4s keyboard doesn't appear when I add a new contact after receiving a call
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Keyboard doesn't show up when I want 2 add a new contacts name on my iPhone 4S
Keyboard doesn't show up when I want 2 add a new contacts name on my iPhone 4S
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Hi,
I just got familiar with my address book on my YouTube channel. I was adding contacts and everything was working fine then out of nowhere I got a Stop Script pop up notice. I am using Firefox. Now when I go to my address book on YouTube it freezes and I often have to use CTL + ALT + DLT to stop it and start over.
Is this a Firefox or YouTube problem? I tried looking at this page on IE and the same thing happens.You are telling us by yourself that is a Youtube problem, because it happens also on IE.
Anyway that may be an issue with your e-mail account. Maybe you have too many e-mails and YouTube gets so busy trying to add all of them. If you hadn't added them already, you could export that directions to CSV and divide the CSV in parts so YouTube wouldn't have so much work. How many directions you wanted to add? -
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution
No it's not true. It's one big practical joke being played on you by Apple.
-
My ipad will not swith on. It was working fine an hour earlier but when I press the power on button nothing happens. I have had it on charge just to be safe but no joy. This is a basic first version ipad. What options do I have?
Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
-
When syncing my Outlook calender with my iphone calender, only items from Outlook synced. Events I added to my iphone calender did NOT show up on my Outlook calender. Is this the way it works, only one way?
Go to Settings>Mail,Contacts,Calendars>Default Calendar and just confirm that you haven't selected a calendar such as the one listed under On My iPhone (if that's listed), and that your have selected your Outlook calendar here as your default. Assuming you have, if you are syncing your calendar using iTunes (rather than iCloud), you may need to reset your sync history in iTunes. Follow the troubleshooting steps here: http://support.apple.com/kb/HT1692.
-
Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??
Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
To solve this i have tried many things said in the forum like changing network.http.keep-alive.timeout to 0, removing and reinstalling firefox but nothing seems to work out. Though chrome is working fine. few days back post installation of firefox 25, i scanned my computer with spyhunter and regcure pro and i dont know why, it seems to have worsen the case. Please help
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
It doesn't start when I want it to and I have to use Chrome. Is it a problem with my computer or Firefox?
So you did a force quit and now you are trying to start it again right?
If so and the "beachball of death" is still spinning, deny the machine it's power source, remove the power cord and the battery and any periphials you have plugged in ie: extra drives etc. Let it rest for a minute plug it all back in then try re-starting in safe mode. If all is well shut down and restart normally.
If you get this far repair the disk and permissions using Disk utility.
Hope this helps
here is a link for the safe mode start-up: http://support.apple.com/kb/ht1455 -
The screen is just on, a dark blue or light black. I can hear siri. And when I receive emails but the screen stays dark blue when its on.
Take it back to whoever replaced the screen.
-
i was listening to my ipod touch 4th g all day i stopped to do something and took the earphones out for half an hour and when i went to plug them back in they kept springing back out of the jack and when i finnaly got it in the noise was very crackely
Get another good pair of headphones and compare the plugs. Look for damage or differences. Maybe the end had broken off causing your problem. The try the other set in the iPod.
Maybe you are looking for
-
Error in adding KE30-PA report created to new user.
Please help me with my problem. I have created a report for KE30-profitability analysis report which I will add to a new user name in sap. I have created the role which is zabc then I added the profitability analysis report which I created. A YXxxxxx
-
Hello, I have an Oracle 11gR2 RAC on two Oracle Linux 5 nodes. For storage I use a couple of OCFS2 partitions. I have deleted a database using dbca and also have deleted the remaining files from shared partitions. When I consulted the free space with
-
hi I M FACING STRANGE PROBLEM. WHEN I GIVE SIMPLE "SELECT * FROM TABLE@DBLINK" COMMAND IT GIVES NOT ERROR. ALSO ON THE MOTHER SCHEMA IT RUNS FINE. BUT WHEN I USE THIS COMMAND OVER OTHER DATABASE WITH DBLINK LIKE I MENTIONED HERE BELOW, A VERY STRANGE
-
Table class interface to replace Not assigned with blank
Hi, I have some of the values for characterstic as Not assigned I wan to replace it with blank in my webreport when I want to replace #with blank I have written the following code In method CHARACTERISTIC_CELL I have written th following code IF I
-
Hi, I am tying to achieve a balance in Assets and Liabilities plus equity by placing a balancing figure through a rule that calculates difference and places it in either Assets or Liabilities depending on which side is lower. The problem arises when