When I attempt to connect my new MacBook Air to my home network I receive a dialogue that says " Could not join name of network . A connection timeout has occurred. Any ideas on how to deal with this?
When I attempt to connect my new MacBook Air to my home network I receive a dialogue that says " Could not join <name of network>. A connection timeout has occurred. Any ideas on how to deal with this?
Please review the following Apple Support article for assistance with troubleshooting wireless connections.
You may also find this OSXDaily article helpful as well.
Similar Messages
-
When i try to connect my iphone to itunes it comes up with a message saying "itunes could not connect to this iphone, an unknown error has occured (0xE8000012)
i have recently bought new laptop and downloaded/installed the newest itunes and this has happened.. any ideas?read
Error -50
Delete Storm Video, QuickTime, iTunes, then reinstall iTunes. See also KB TS1583for error -50 -
I have recently purchased a used iPhone 4, when I pulg it into my pc a skull icon appears instead of the apple. The pc also does not recognise the iPhone. The phone was originally purchased in March of this year, so it is under 12 months old. Has anybody encountered this problem and or know how I can fix the phone? Thanks
You have apparently purchased a jailbroken phone. You can try to get it into recovery mode, then restore as new, but no guarantee it will work.
http://support.apple.com/kb/ht1808 -
I have an IPod Classic loaded with software version 1.1.2. I tried to add some music to it from my ITunes library and got a message that the IPod could not be sybced because it cannot be read from or written to. Please tell me how I can fix this issue. Thank you in advance for any assistance you can can give me.
Click here and follow the instructions.
(126846) -
when I try to load a new version of itunes on my windows XP pc I get a message that file MSVCR80.dll is missing as well as a windows error 126 message.
any idea what to do?Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
HT1923 Apple Mobile Device Support will not uninstal. Any advice on how to deal with this?
Apple Mobile device will not uninstall. Other components uninstal ok. Cannot uninstal and reinstall iTubes. Any advice?
Hey AJKP,
Thanks for the question. I understand that you are experiencing issues uninstalling Apple Mobile Device Support. The following article provides a solution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
since I updated my software to the IOS 7.0.4
I am unable to use any WIFI network
i cannot connect to my home wifi network I am unable to do any backups. I have backed up my phone onto my Itunes account on my computer and I reset my phone...this did nothing but lose some of my pictures.. PLEASE HELP!I read the article thanks. I tried the settings-general-reset-reset network settings-reboot system-go to wifi settings-select wireless connection-select the ">"-symbol-select auto for http proxy. I was optimistic about that because I thought I changed some setting somehow to cause this problem, but it didn't work. More specifically, I did connect successfully and browsed the Internet for a good while, but then I put down the phone for a minute, the phone went into sleep/power save mode, and when I picked it back up a moment later it was no longer connected. Dang. Had to select the connection and use my password yet again.
Another valuable bit of info for you. The only network with which I have this problem is my home. I use all kinds of devices at home and no other devices have this problem. Also, I use this iPhone all over with various wifi networks at hotels and starbucks and family's homes with no issues whatsoever. It remembers and automatically reconnects with every wireless network except the one in my own house. -
I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?
Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath -
I am trying to activate iMessage. I receive a message that says "Could not sign in. Please check your network connection and try again." I connection is strong. I can browse the internet but cannot connect to iMessages. I don't understand. Any ideas.
Turn iMessage off and then on again, wait a few minutes.
Turn Airplane mode on and then off again, turn iMessage off and then on again, wait a few minutes.
Make sure your iPad is on Wi-Fi, reboot your iPad, turn iMessage off and then on again, wait a few minutes.
Wait and try again later -- Apple's servers can get overwhelmed or experience outages just like anyone else's. -
When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?
Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics -
How to deal with this problem while Flex Integration SSH
Error creating bean with name '_messageBroker': Instantiation of bean failed; nested exception is java.lang.NoClassDefFoundError: flex/messaging/AbstractFlexSessionProvider……
Caused by: java.lang.ClassNotFoundException: flex.messaging.AbstractFlexSessionProvider
I have exist project used SSH ,and now need flex to be use in some new unint.
I hava follow these step to write my code , please help me to pickup the misstake i had token.
(flex4.0 spring 3.6 strust2.2 **)
1. download the Blazeds file and spring-flex-core-1.5.2.RELEASE.jar
(org.springframework.integration-1.0.3.RELEASE.jar also include)
2. unpack the Blazeds copy the flex folder to WEB-INF
3.add the lib/* to my project lib folder
4.add some declaration in the web.xml
5.new a flex-application-config.xml
^^^^ and so on. I don't know how to deal with this problem!!!
Waitting for help!The information you provided is totally useless for determining the problem.
If it helps, I think the message you are getting is related to BlazeDS not being able to find the service class you are calling. You either have a typo somewhere, or you didn't set up a secure channel in your service config (I am assuming you meant SSL and not SSH). -
Move of mailbox with over 30K of folders fails, how to deal with this.
Hello all,
I'm in the process of moving all Exchange 2010 mailboxes to newly created databases located on new storage.
Every mailbox except one moved successfully, the "problem" mailbox keeps failing and I need some advise on how to deal with this.
The mailbox that keeps failing is only 4 GB but has over 30K of folders that the users created manually over the years.
They are unable to easelly delete folders as they have created many sub folders within the folders.
I posted a part of the failed move request log below.
Can anyone advise on how to solve this?
Thanks in advance.
21-2-2015 18:15:13 [EXHUB1] Fatal error MapiExceptionMaxSubmissionExceeded has occurred.
Error details: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005, ec=1242)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=7574]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=360][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropWriteStream [45]
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropSaveChangesMessage [12]
Lid: 17082 ROP Error: 0x4DA
Lid: 18273
Lid: 21921 StoreEc: 0x4DA
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSaveChangesMessage [12]
Lid: 27420 dwParam: 0xE1F000B
Lid: 36537 dwParam: 0xE1F000B
Lid: 5587 StoreEc: 0x8004010F PropTag: 0xE1F000B
Lid: 33375 StoreEc: 0x8004010F
Lid: 27420 dwParam: 0x806684B0
Lid: 36537 dwParam: 0x806684B0
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x806684B0
Lid: 64931 StoreEc: 0x8004010F
Lid: 46509
Lid: 40193 StoreEc: 0x8004010F
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x30130102
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 64319 dwParam: 0x5000
Lid: 39743 dwParam: 0x6730
Lid: 45016 StoreEc: 0x4DA
Lid: 57304
Lid: 5041 StoreEc: 0x4DA
Lid: 4465 StoreEc: 0x4DA
Lid: 6926 StoreEc: 0x4DA
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 21457
Lid: 19665 StoreEc: 0x4DA
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj, GetAdditionalProperties getAdditionalPropertiesCallback)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveState(SaveStateFlags flags, UpdateRequestDelegate updateRequestDel)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.SortMessages(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (a4966c13-778a-4d70-9087-f077e2523f66)
Key: FEF1D04E070AB74A99B809B7797674AE000000000000000000000000000000009B5540B45B37774CAB84806C1964B598
SyncStateLength: 27050362
21-2-2015 18:15:13 [EXHUB1] Relinquishing job.Hi,
Based on the description, please run the following commands to check if there are any message limit size. Try to increase the limit size then move this mailbox.
Get-mailbox –identity “user name” | fl MaxSendSize,MaxReceiveSize
Get-transportconfig | fl MaxSendSize,MaxReceiveSize
Get-transportrule | fl MessageSizeOver
Get-sendconnector | fl MaxMessageSize
Get-receiveconnector | fl MaxMessageSize
Note: Once we increased the value we need to wait for the AD replication and cache to be cleared and then test the move mailbox.
If this doesn’t work, please try to move mailbox with the skip corrupted items. This will skip the corrupted items and move only the good items to the target mailbox.
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/5383a826-4383-4b26-a503-2c3bb635f9d2/mailbox-move-to-exchange-2010-fails-for-mailboxes-over-23-gb?forum=exchangesvrdeploylegacy
Best Regards. -
How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.
You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.
-
How should i connect my new macbook air to lcd projector for presentations?
how should i connect my new macbook air to lcd projector for presentations?
One of these should work, depending on the projector. Just note both will not allow you to play protected movies on the projector.
VGA
http://store.apple.com/us/product/MB572Z/A?mco=MTY3ODQ5OTY
DVI
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY -
How to deal with this problem?
How to deal with this problem?
We plan to use Oracle Coherence (In Memory Data Grid) for a large-scale application. In order to keep the database table data in Coherence caches, we will create all the corresplonding Java objects (entities) and construct the persistence system using JPA/EclipseLink+JDBC. In this way, any in-memory object update will be persisted to the corresponding database tables.
The problem is that some existing application codes are updating these database tables directly now. If the direct-database-table update is not permmited in the persistence environment, we have to discard most of the existing application scripts.
I want to know, in this situation, should I discard most of the existing scripts?
Are there any other solutions?Allowing writes from both cache & DB is possible with its own set of issues.
The main issue to consider is conflicts from updates on same record via both cache and DB. If your caches are write-through the conflict decreases - but then cache writes become slower. If your caches are write-behind potentially the older cache update will overwrite the latest DB update. Now you are back to Database 101 -- timestamps, versions, etc...
If you use a DB trigger to initiate the resync request you might want to distinguish whether the update has come from the cache-store (in which case, you may choose to do nothing), or if the update was from the 'existing apps', etc...
If you choose to inject the resync logic at the application code level - you have the usual sourcecode issues - can you modify the code, is all the DB code localized, what options do you have to link with Coherence functionality (DLL, external proc, webservice, etc), etc... Naturally though, if you have to make substantial changes to signal a resync....you might consider taking the extra step and change the code to write to the cache.
Maybe you are looking for
-
Having issues trying to set up email. Keeps saying the username or passwrod is incorrect..
-
Covnert Complex XML to Simple XML tags using Adapter Module
Hi <buyer> <fnParty:partyIdentifier partyIdentifier="GER" partyIdentifierQualifierCode="SenderAssigned"/> </buyer> I want to convert above complex xml into following simple xml document <buyer>GER</buyer> I am writing adapter module. Could any one pl
-
Is it possible to add text to a photo in Lightroom 4?
-
B8850 Printer with Windows 7 Bit OS Would like to know if HP website has a download page(s) for ICC paper profiles. I have found "http://h10088.www1.hp.com/cda/gap/display/main/index.jsp?zn=gap&cp=20000-13698-16022-14355^81765_404... which gives IC
-
Hello, I live in Mauritius and want to be able to download iPod Touch applications as well as the 2.0 update, but to do so, I have to register but the problem is that Mauritius is not among the countries where the billing address is available. What s