When I Burn to DVD I get poor video quality.

I need help with all the steps to ensure I'm doing this the right way when burning my videos to DVD. Here is a list of all my equipment and software:
OS -Windows 8
Program - Adobe Premiere Elements 11
System-
Processor- Intel(R) Core(TM) i5-4430 CPU @3.00GHz 3.00 GHz
Installed memory (RAM)- 12.0 GB
System Type- 64-bit Operating Sytem, x64- based processor
Video Card- GEFORCE GTX 760 2GB GDDR5
Video Camera- Sony HDR-FX1
Product Type Camcorder- 1080i
Progressive scan- Yes
Camcorder Media Type- Mini DV (HDV)
Digital Video Format- MPEG-2
Image Recording Format- JPEG
I did a sample 10 minute video (with no editing) burned it to DVD and the quality is almost VHS looking when I watch it on a DVD. I've tried many different options and still get the same results. I tried  up-ing the DVD space by purchasing a Dual Layer Double Couche DVD+R but came out the same results. I put the settings ( when burning to DVD anywhere from NTSC_Widescreen_Dolby DVD to Just NTSC_Dolby DVD. I have put the Quality to 'Fit Contents to available space' and Highest Quality with no difference to the burned DVD. I've gone to File/New/Project and changed the settings to NTSC-AVCHD-Full HD 1080i 30 and regular HDV 1080i 30 with no change. There are like 15 different options and really don't know what I'm doing wrong. Please HELP me before I go Crazy!
Any help would be very much appreciated.
Thanks
Chris

Chris
For your consideration...
1. HDV data capture firewire into Premiere Elements 11 Capture Window.
a. Beforehand, set the project preset manually to NTSC HDV HDV 1080i30 via File Menu/New/Project. Before exiting the new project dialog, make sure you have a check mark after Force Selected Project Settings on This Project. Then go back to the Premiere Elements 11 Expert workspace and Add Media/HDV Camcorder.
or
b. Do your DVD Data capture, let the program set the project preset. Then verify the project preset via Edit Menu/Project Settings/General. Editing Mode should be HDV 1080i, Timebase should be 29.97 frames per second, and frame size should be 1440 x 1080. The pixel aspect ratio (grayed out) should be HD Anamorphic (1.333). Field Order should be shown as Upper Field First. If that is not the case, then start over and set the project preset yourself manually as described above in "1a".
Once you get the MPEG2.mpg on the Timeline, we are going to look at two different situations
a. the DVD-VIDEO results with Right click the video on the Timeline, select Field Options, followed by Reverse Field Dominance.
and
b. the DVD-VIDEO results with Moving forward not doing anything with the Field Options.
Since your source is 16:9, the you want to stay with the DVD-VIDEO widescreen (NTSC_Widescreen Dolby DVD preset in the burn dialog...Publish+Share/Disc/DVD disc)
If you select Publish+Share/Disc/DVD disc you will be viewing DVD-VIDEO widescreen format on DVD disc. The frame size is 720 x 480 and is stretched for display after encoding. As I said no where near 1920 x 1080.  My recollection is that it is about 856 x 480. This can be played on the DVD player. Maybe some Blu-ray players if the players specifications provide for that.
If you select Publish+Share/Disc/AVCHD disc, you will be viewing AVCHD format on a DVD disc. You can set the preset for 1920 x 1080 and thus be viewing 1920 x 1080 on that DVD disc. BUT, AVCHD DVD cannot be played on a DVD player. It needs a Blu-ray player. And even all of Blu-ray players may not play it. It also can be played on the computer if you find a computer player to play it.
You mention your end results being pixelated. I am wondering if your pixelation is really an interlaced problem.
Your source is interlaced video with a field order = Upper Field First. The DVD-VIDEO standard calls for field order = Lower Field First. My suggestion above to look at Field Option Reverse Field Dominance goes to that point, reversing the field order. More on that later.
Let us see the results and then decide what next.
If you think you want to go Blu-ray, then we can talk about that too. Do you have any Blu-ray equipment now? For the time being, to get the flavor of the higher resolutions on disc, you could make the comparison of your DVD-VIDEO widescreen on DVD disc versus AVCHD on DVD disc.
Looking forward to your follow up.
ATR
Add On...After all of the above, I forgot to mention. Do your DVD work with a check mark next to "Fit Content to Available Space". The only time you want to leave "Fit Content to Available Space" uncheck is when and if you get a Data Rate error message where you have to lower the bitrate to be able to continue.

Similar Messages

  • When I burn a dvd, it's really bad quality in black & white

    When I burn a dvd, it's really bad quality in black & white.

    What program are you using to burn the DVD? What is the original DVD content (another DVD disk or movie files -- what's their format?)?

  • When I burn a dvd I get wave on items that have lines in the pictures

    When I burn a dvd in imovie any stills I have that have lines on things like a shirt start to wave.

    that's because the Ken Burns effect (zoom in/out) will play havoc on some colors, stripes, or other designs. You can minimize it by minimizing the effect, but unless you were to invest in professional software, I don't believe you can get rid of it altogether. It can even happen on TV - a reporter wears something that will not show well especially if he moves around and you will get some strange effects.

  • SonyAVCHD video looks great in iMovie11 or iDVD7.1.2. When I burn a DVD it's terrible. If I freeze frame I see squares. The picture has poor contrast. I've viewed DVD on my 6-year-old, 24 in. intel 2.16 GHz iMac, and on TV. Help!

    I just bought a very good quality Sony AVCHD camcorder. I also just upgraded my computer from Tiger to Snow Leapord. My iMac is a 6-year-old, 2.16GHz Intel 2 Duo, with a 24 inch screen and 3GB Ram.
    My Sony camcorder HD video looks great in iMovie11 and in iDVD7.1.2., but when I burn a DVD "professional" it looks terrible. If I look at a freeze frame on the DVD I see image made-up of squares. The picture has poor contrast. It looks as bad as poor quality VHS. Do I need to get a new iMac to make this work? Is it possible to make a sharp, clear DVD from AVCHD footage with a 6-year-old iMac like mine?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • With PRE 8 when I try toExport & burn a DVD, I get error code 150:30

    With PRE 8 when I try to Export & burn a DVD, I get error code 150:30
    What is wrong?
    Thanks, Tom
    My Laptop is
    Dell Studio 17 Laptop PCS17HN
    Windows 7 Home Premium
    Processor Intel® Core™ i7-720QM Quad Core Processor 1.6GHz
    6GB, DDR3, 1333MHz, 2 DIMM
    (2) 500 GB Dual SATA Hard Drive (7200rpm) - lots space available
    1GB ATI Mobility Radeon™ HD 4650v + TV Tuner
    17.3” HD+ (900p) Bright LED Display with TrueLife™ and Camera/Facial Recognition SW
    Dell Wireless 365 Bluetooth Internal (2.1) [$20.00]
    8X DVD+/-RW Dual Layer Drive8X DVD+/-RW Dual Layer Drive
    + Roxio Easy CD & DVD Burning - Enhanced Burn/Authoring
    Soundblaster X-Fi Hi Def Audio - Software Enabled

    Please work through the troubleshooting steps in the FAQs to the right of this forum.
    http://forums.adobe.com/thread/415318?tstart=30
    If you'll tell us in as much detail as possible the results of each step, we'll likely be able to diagnose your problem and recommend solutions.

  • When trying to Burn a DVD I get the following error: 'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03'   Please advise

    when trying to Burn a DVD I get the following error:
    'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03' 
    Please advise

    this reccommendation is to OS 10.5.8 only
    Go to the hard drive find the following folders and look for the following file, com.apple.finder.Plist, delete it and restart the computer. Its found under the following folder Users-account name-library-prefrences. This helped resolve my issue for now.

  • Poor quality (vibration) on video clips when it burns onto DVD

    We created 15 mins video on Final Cut Express, saved on Quick Time, and burned onto DVD. Although the video on Quick Time was fine, some of the quality of the video clips on DVD we burned was so poor....It had so much vibration on some of the video clips. We tried on both Best Performance & Best Quality, but they both had poor quality. Do you have any suggestions? Do you think upgrading to I Life 08 will help? Please Help!!!! Thanks!

    It had so much vibration on some of the video clips.
    Video on a DVD is mpg-2 compressed (which looks at frame to frame differences in compression) and is interlaced.
    If you have content with lots of movement - like many hand-held shots - mpg-2 compression and interlacing will act to create lots of 'jumping' or 'vibration'. The only solution is to use a tripod and avoid shaky, hand-held shots.
    BTW, for a short clip, 'Best Performance' will give you the best quality you can get.
    F Shippey

  • Getting multiple copies of iPhoto slideshow when I burn a dvd - why?

    I just learned how to create a slideshow in iPhoto and struggled through the learning curve to be able to burn it as it appears in iPhoto. I got so excited today when I burned a dvd and it actually played on my TV's dvd player, though it was missing the iDVD theme intro. Then when my slideshow was over, the theme intro played and the entire slideshow played again. In other words, I have at least 2 copies of the slideshow on the disc.
    Anyone know what I'm doing wrong? thanks!

    Hi
    Most common origin to this are:
    Brand of DVD used - NoName, Memorex etc cheap brands might work as Data-DVDs - BUT NOT as Video-DVDs
    Type of DVD used - I only use SL-DVD-R as they also playback on older DVD-players. DVD+R for newer DVD-players. Never ever DVD+/-RW. Dual-Layers usually creates more problems than Single-Layers
    BURN SPEED - Very IMPORTANT factor - I never go faster than x4 - Normally I use x2
    Material used - Video Codec, Photo and Audio file formats
    Video-Codec: StreamingDV, AIC and HDV (I use)
    Photo: .jpg - NO .bmp or other - all converted to .jpg first
    Audio: .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3, wma etc ailient formats - all converted to ..aiff 16-bit 48kHz or 44.1kHz first
    Free Space: on Start-Up (Macintosh HD) Hard Disk - I never go less than 25Gb when doing Video-DVDs (for SD-Quality Video - if HD material is used 4-5 times more are a safe low level) (Other external Hard Disks - DO NOT COUNT as space here can not be addressed by Mac OS or iDVD for it’s massive use of .temp files)
    Dusty DVD-burner Laser: I use a Cleaning DVD (no liquid but the one with brushes) from time to time.
    Harmed DVD-burner Laser: Easy to do by burning more than three DVDs at a time - I let it rest for 30 minutes till next batch of three DVDs. If this happened - then only a costly repair will help. It will not heal by it self.
    OBS: There are more than one Laser in the DVD-Burner so other functions might work OK as Playback CD/DVDs and even burn CDs. Still being broken.
    Yours Bengt W

  • My MOV videos do not play when I burn a DVD using iPhoto.

    My MOV movies do not play when I burn a DVD using iPhoto.  I can use the other method with my Mac to burn DVDs but the videos are not good quality like they are in my iPhoto albums.  How can I get better quality in the DVD videos if I am unable to burn a DVD using iPhoto?  I upgraded to the free Mavericks.

    Hi
    Most common origin to this are:
    Brand of DVD used - NoName, Memorex etc cheap brands might work as Data-DVDs - BUT NOT as Video-DVDs
    Type of DVD used - I only use SL-DVD-R as they also playback on older DVD-players. DVD+R for newer DVD-players. Never ever DVD+/-RW. Dual-Layers usually creates more problems than Single-Layers
    BURN SPEED - Very IMPORTANT factor - I never go faster than x4 - Normally I use x2
    Material used - Video Codec, Photo and Audio file formats
    Video-Codec: StreamingDV, AIC and HDV (I use)
    Photo: .jpg - NO .bmp or other - all converted to .jpg first
    Audio: .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3, wma etc ailient formats - all converted to ..aiff 16-bit 48kHz or 44.1kHz first
    Free Space: on Start-Up (Macintosh HD) Hard Disk - I never go less than 25Gb when doing Video-DVDs (for SD-Quality Video - if HD material is used 4-5 times more are a safe low level) (Other external Hard Disks - DO NOT COUNT as space here can not be addressed by Mac OS or iDVD for it’s massive use of .temp files)
    Dusty DVD-burner Laser: I use a Cleaning DVD (no liquid but the one with brushes) from time to time.
    Harmed DVD-burner Laser: Easy to do by burning more than three DVDs at a time - I let it rest for 30 minutes till next batch of three DVDs. If this happened - then only a costly repair will help. It will not heal by it self.
    OBS: There are more than one Laser in the DVD-Burner so other functions might work OK as Playback CD/DVDs and even burn CDs. Still being broken.
    Yours Bengt W

  • When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

    When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

    You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
    If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive. 
    You can also boot into Safe mode
    To start up into Safe Mode (to "Safe Boot"), do this:
       1. Be sure the computer is shut down.
       2. Press the power button.
       3. Immediately after you hear the startup tone, press and hold the Shift key.
          Tip: The Shift key should be held as soon as possible after the startup tone but not before.
       4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    Please post back with results,
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

  • I have a DVD I recorded from my tv.  I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not.  My question are: Why does my computer think it's blank? And how can I copy a DVD?

    I have a DVD I recorded from my tv.  I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not.  My questions are: Why does my computer think it's blank?  And how can I copy the DVD providing my computer recognizes there is content on it?
    Thanks, Sheila

    TV video typically is copyrighted content.  We'd be breaking several rules trying to help you.  Good luck!

  • When I burn a DVD...

    When I burn a DVD from Aperture for friends that do not have a Mac they can not veiw it. How do I burn a DVD for non Mac users?

    OK fair enough try this:
    Drag the video out of Aperture and drop in on the Desktop. Then open  it in QuickTime Player.
    Select File->Export
    In the export window select
    then burn this exported file to the DVD and see if the PC can play it.

  • Why when we burn a DVD from iMovie, does it pause in different places?

    Why when we burn a DVD from iMovie, does it pause in different places?

    Hi
    does it pause in different places?
    During Burn ?
    During Playback of DVD ?
    On Mac ?
    On Stand alone DVD-Player ?
    During Burn.
    What brand of DVD ?
    What type of DVD ? DVD-R or DVD+R or +/-RW - SL or DL
    Did You set down burn speed in iDVD ?
    Free space on Start-Up (Mac OS) hard disk. HOW MUCH ?
    Video codec used (feed into) iDVD ?
    Yours Bengt W

  • I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1.  Thanks for any input.

Maybe you are looking for