When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

When I change the configuration of my iPad apps (I organise them on the laptop, then sync) the arrangement does not transfer to the iPad.

Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg

Similar Messages

  • Whenever I close my laptop then open it it does not turn back on, the screen stays off but I will hear the fan running.  I then have to physically press the power button for it to turn on.  Help!

    Whenever I close my laptop then open it it does not turn back on, the screen stays off but I will hear the fan running.  I then have to physically press the power button for it to turn on.  Help!

    Try here.  iPhone and iPod touch: Frozen and unresponsive

  • HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

    I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
    I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
    But I proceed to type the words do not transfer to the screen.
    Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
    How long before they are?

    The BestBuy guys are clueless.  I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
    A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them.  You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

  • HT201269 How can I backup all my email messages from my ipad2 to my mac. iTunes does not transfer all the sent / received mail.

    Hi,
    I damaged my ipad and saved a backup using iTunes while it was away for repair.
    I used another ipad while it was away, but none of my email messages sent or received had been saved.
    How do I backup my email ?

    hi, not totally, as when the N8 died, the shop here in France couldn't really do much to help and more like didn't want to do much to help, and transferred what data was available from the sim to the mini sim on the apple. Now looking in depth, Windows Contact is an 'orrible application that is not very easy to handle (Windows Address Book is no longer available for anything above Vista and is all tied into Windows Live and things to do with Hotmail and Messenger..... Gatesy is trying to dominate things again..... WOZ HELP!!)
    Sony have worked alongside Apple for a long time, so with a new 12/2012 Experia smartphone, the transfer details are a doddle, but now that Nokia has succombed to being part of the Dark Side (MS) and offering windows phones only, I can understand the retiscence of our late leader and his "heavenly crew" of having to deal with the Dark Side

  • HT5706 I have not used my apple tv in a few years, and just got it out of the bag. I connected it up, and it cannot set date, time.  it also does not interact with the remote.  Could it be as simple as a new batter is needed for remote?

    I have not used my Apple TV in a few years, and just got it out of the bag to use on a new TV.  I connected it up to power and with an HDMI cable toTV.  It attempts to set date and time and cannot.  I cannot get the remote to interact with the box also.  Could it be something as simple as needing a new battery?

    Hi kybriar,
    Thanks for using Apple Support Communities.  This article has steps you can take to troubleshoot the remote itself:
    Troubleshooting the Apple Remote
    http://support.apple.com/kb/ht1722
    For the issue of setting the date and time, these articles may help:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    Reset Apple TV by unplugging it from the power outlet, waiting about five seconds, then plugging it in again.
    Power off your TV, wait five seconds, then power it back on.
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connectionshttp://support.apple.com/kb/TS4546
    Ensure that Apple TV is within range of your Wi-Fi router or base station.
    Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
    Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
    Check your Wi-Fi network settings on Apple TV:
    Select Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
    Choose your Wi-Fi network from the list.
    If your Wi-Fi network uses a password, make sure you are entering it correctly.
    Restart your Apple TV by selecting Settings > General > Restart.
    Try restarting your Wi-Fi router or modem by turning it off and then on again.
    If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by selecting Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
    Cheers,
    - Ari

  • Camera roll does not transfer to new iPad

    Camera roll photos in iCloud do not load on new iPad. Only photo stream does. I've reset
    New iPad twice

    Transferring from old to new
    http://support.apple.com/kb/HT2109

  • I have both my iPhone and iPad backing up via iCloud, but they are not sharing the information between devices ie if I purchase an app on one it does not transfer to the other although the backup is successful via iCloud.

    I have both my iPhone and iPad backing up via iCloud but the data is not being shared between the devices. When I backup it appears to be working as there are no error messages but the data is not shared between each. Any help would be great as this is very frustrating.

    Backing up to icloud is not the same as syncing data between devices.  Go to
    Settings>Store.  Turn on the automatic downloads that you want on that screen.
    Settings>iCloud.  Turn on the features you want to sync between devices.

  • HT1351 I'm OK until "click music tab, select the option "Sync Music" which does NOT appear under the music tab!?

    I recently upgraded my iPad from 4 to 6 iOS. I have a bunch of music on my PC, which I want on my iPad. My music on my PC is all in iTunes format, it recognizes my iPad, I click on the Music tab, and it gives me a list of genres--absolutely nothing about syncing. There is also no evidence of a "Summary" button anywhere. What am I doing wrong?

    Cancel all of the above. I didn't realize I had to unhide the sidebar to get to the correct music tab. Why do they hide what you need, and let you guess how to make it appear. *slinks off in embarrassment.

  • When I place photos on the cloud to share with friends, the photo IDinformation I have entered with the photo does not transfer.  Is there a way to have the text follow the photo in the cloud?

    When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo.  Is there a setting I am missing that would allow the text to go along with the photograph?

    The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.

  • Field ZZBUDAT is delta-relevant, but does not exist in the field list

    Hi All,
    I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
    So i have enhanced the datasource now that date is coming in my datasource.
    But when i tried to make delta on that date field its showing error-
    Field ZZBUDAT is delta-relevant, but does not exist in the field list
    Message no. R8279
    Diagnosis
    The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
    Now how i can make this field dalta relevant?
    Thanks,
    Piyush

    Piyush,
    I think the message in SAP is quite clear....
    If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
    The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
    Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
    The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

  • TS3274 I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine.

    I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine. Help!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • HT4913 My IPhone 5 will not recognize that I have an Itunes Match account.  When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match.  This does not happen with my Ipad.  Any Ideas what to do?

    My IPhone 5 will not recognize that I have an Itunes Match account.  When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match.  This does not happen with my Ipad.  Any Ideas what to do?

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

Maybe you are looking for

  • What are the different values available for type attribute

    Hi,     I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute.

  • Can't sync to Outlook 2003 Calendar

    As of today, I cannot get information from my BlackBerrycalendar into Microsoft Outlook.  This is new:  for the last year it was not a problem. I have a Curve 8300 series phone (Verizon) PIN 302AC62.  My operating system is Windows XPProfessional, an

  • Downloading Report output to a Local File

    Hi, I want to download the my ALV Report output to a local file. I am following the menu options from ALV output:   LIST --> Export --> Local File --> Unconverted Format  --> I entered a text file name on the desktop. The data is being downloaded to

  • Internal & External No. Range....................

    1.I have created GL master with selection of open item management and i have posted business transactions to that GL. Now client wants to change that GL  deselect open item management. is it possible...how? 2.What is exactly diff between External and

  • Oracle RAC crs无法启动的问题

    这两个节点的RAC是做为DataGuard备库. 版本:Red Linux 5.6,Oracle 10.2.0.3.0 node1->$ crsctl check crs CSS appears healthy Cannot communicate with CRS EVM appears healthy node1->$ crsctl query css votedisk 0. 0 /dev/raw/raw1 located 1 votedisk(s). node1->$ ocrcheck S