When i charged my phone,The plug in itune picture came out.But when i plug in my computer,the apple keep coming out and going off.So what should i do?
When i charged my phone,The plug in itune picture came out.But when i plug in my computer,the apple keep coming out and going off.So what should i do?
to me it sounds like it need repair
Similar Messages
-
Trouble with phone today. Can't power off. Can call but I can't hear caller unless I put on speaker. Apple icon keepd going on and off.
Trouble with phone today. Can't power off. Can call but I can't hear caller unless I put on speaker. Apple icon keepd going on and off.
-
I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?
Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.
-
My ipod touch 4th generation isnt charging with my cable.
When i use my dad´s cable, it charges.
But, however, after it´s fully charged (which takes strangely only a minute), i use it for five seconds and then it goes off.
What should i do?- See:
iPod touch: Hardware troubleshooting
- Try another cable if available
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game
I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine? -
my phone wont power up and its not the battery or the software as ive updated all the latest versions to my pc, it gets to the apple on power on and switches off? help!!!!
got no idea me like??
-
I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks
Im not sure what garage band is, but i can tell you the way apple recommends making ringtones. Highlight a song in iTunes, right click and select get info. Goto the options tab and youll see the time lengths (write down the ending time) for the start time type in where you want the ringtone to start, ringtones can only be 30 sec long so make the ending time 30 sec later. Exit it out of the info and while song highlighted goto the "advanced" tab at the top of iTunes where you will see an option that says "create aac version". after creating the aac version you will have a duplicate song in your iTunes, change the original back to the correct time length. Take the 30 sec aac version and drag it to your desktop, right click the icon and click "preferences" You will then be able to change the name of the file which will be somethign to the effect of "songnamehere.m4a" you just change the m4a to m4r. you now have a ringtone, drag the new file to iTunes where it will pop up in a new tab labled ringtones. If you cannot change the name of the file when it is on your desktop let me know and i will give you instuctions how to be able to change it. Once you get it figured out you can use any song you have on iTunes to make a ringtone.
-
Mac os x 10.6.8 why do the fans keep coming on and computer slows down
mac os x 10.6.8 - Why do the fans keep coming on and computer slows down with coloured circle.
Use your Activity Monitor, sort the %CPU column to identify what process is hogging your resources.
-
After I slide to power off my iphone 3GS it would not turn on again.Only the apple logo comes on and then it is off. If I connect to the power the apple logo comes
and then it comes on . I have just used itunes to restore my iphone. How can I make my iphone work again?Keep using it untill it powers off, then charge it to full to re-calibrate the battery.
If problem persist, maybe your battery needs to be replaced. -
my phone wont turn on anymore, at first it was just shutting down for no reason but still coming on but today the phone wont come back on,now the apple sign is on screen and going in and out. what should i do to fix this problem
If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars. -
Hello.
My iPad2 shows a message of iCloud"Ignore or Settings". When I press on either "Ignore or Settings" it does not do anything. The screen is totally frozen. I haved turned it OFF and ON , but message keeps coming back.
Any ideas?
Your help is highly appreciated.
Thanks,
CaroYou are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
pls help.... with my problem with my iphone
The phone randomly shutting down-that could be a hardware issue. Do you live near an apple store? they could see whats up with the phone. It could very well be something in the software though. A good way to test it would be to follow this article: http://support.apple.com/kb/HT4137 and test it for a few days. If it doesn't do the shutting down thing, you know it's a software issue. If it still does it, you know it's a hardware issue.
As far as deleting the apps, they'll always be there. Just make sure there's not a check mark next to them and they won't sync to your phone =] -
i just got my mac book pro and i am trying to log into my app store and iTunes and i try to log in and it keeps saying you need to review your account what does this mean and what should i do
Please provide the full text of the message and describe at which point in the login progress it is displayed.
In the meantime, make sure you're logging in with the same Apple ID and that the new computer is authorized with that iTunes account. -
just updated my phone and now it doesn't work at all. apple logo queeps coming on and off on my sceern.
Was your phone jailbroken or hacked to unlock it before you updated?
-
So, I dropped my iphone into a river and picked it up very quickly, turned it out and put it in rice, after some hours I saw it was on with a blueish screen so I turned it off again and put it back in the rice, then after 6 hours in total from when it fell in the water I charge it and see the start up apple logo but then small text appears in the upper corner and it goes out again, this happened now twice, what is this and what to do?
Try the method of putting it in a bowl of rice. If the issue remains then you would need a replacement.
If you have AppleCare+ then you could get it replaced with one of your 2 incidents.
If you do not have ApplCare+ you would get a replacement as an Out of Warranty Service due to accidental damage. Now based on your country/region you could either get a replacement through postage or at an Apple Retail Store. Follow the link below for a pricing:
http://www.apple.com/support/service/
- select iphone
- select your country
- select warranty and service pricing
Choose the last option and it will give you a price based on your country and iPhone. Remember the cost shown includes a postage fee so look below the prices and how much the postage fee is as this would not be included in the cost if the replacement was done at a store.
Hope this helps
Maybe you are looking for
-
Open and print pdf file through form 6i
I want to run and print a pdf file through the form. Any suggestion please...... thanks in advance.... ifti
-
How to insert values in table control & how to place listbox in table ctrl
Dear all, I have created table control in Module pool program. My requirement is first 1)How to place list box in table control 2)Based on listbox selection i have to enter values in table control row.. With
-
TS3694 every time i try to restore my ipod it says "error"
Every time I try to restore my Ipod it says "error"! heeeeelp!!
-
Using GroupMembershipListener to find primary server
Hi, We are building a HA application. We need to find out which one of the servers are the primary one. FOr that we want to use the GroupMembershipListener. Is this correct way to go? We added to a bean that implemet StreamSink also the GroupMembersh
-
Need help related to Graphs/Charts in Labview
Hi, I need some info related to Graphs/Charts in Labview. Where I am facing problem is: User has to select from a ring control , type of graph/chart he wants i.e.,XY Graph,Waveform Graph,Waveform Chart... Based on his selection I need to create that