When i click on a photo file in windows , elements opens, then i have to go back into windows and click again to open file , earlier version opens program an file how can i get elements 12 to do the same?

Elements

The way I got around the situation was to write a custom folder action and attach it to my Downloads folder. The good thing about this is that it works irrespective of the browser du jour I'm using.
This way you can define any filetype you're interested in to auto-open when a file is created in the Downloads folder (or any other folder of your choosing).
It's not that tricky to add. I think I posted the code here many moons ago so I'll try and track it down...
Edit: It was a post to macosxhints.com that I last linked to: http://www.macosxhints.com/article.php?story=20050122214044554#comments
Hope some of that helps.

Similar Messages

  • I have the original iPad and when I sync it with my macbook pro in iPhoto the faces are different on both, how can I get them to be the same as on the computer

    I have the original iPad and when I sync it with my macbook pro in iPhoto the faces key photo aren't the same on both devices, how can I get them to be the same as on the computer

    Interesting observation.  Thanks for sharing.
    Did you have a technical support question?

  • How can I get page 2 in the same format?

    I have just completed the first sheet in Numbers, and I would like to know how to bring up successive sheets in the same format.
    To get the first sheet, I went to:
    Numbers
    File
    New from template chooser
    Blank
    Now I have filled that sheet and would like to continue with sheet 2.
    I tried clicking on Sheet in the toolbar, but got a very small sheet, not full size.
    Thanks for the help.

    Depending on how your margins are set and the height of your table rows, you will get some number of rows per page. Your only control of where the pages break is with those controls. Margin setting is a Sheet Property and can't be changed page by page, but if there's a particular row that you want to end a page with, just increase the height of that last row until the rows below pop to the next page.
    If you have a Header Row, you can ask it to repeat at the top of each page, so you don't have to manually repeat the column headings.
    Knowing how to easily change the dimensions of a table, in rows and columns, is amongst the basic stuff covered in the Numbers User Guide. You can get it from the Help Menu. A good read on a Winter's evening.
    Jerry

  • How can I get string that is the same as the name show on the Jtable UI

    I need to implement the jtable keystore searching feature.
    but I face one problem. because in my application, there are many different objects for the data vector in the model of different tables.
    in order to using the same class to do the search for all of the tables. I need to get the same string for the items showing in the table instead using
    table.getValueAt(r, c) to get a object. threrefore I can compare two strings.
    any advice is appreciated.
    Jack Tie

    but the problem is Can we make sure the string we get
    from table.getValueAt(r,c).toString
    is the same as the string show on the JTable UI.That probably depends on the TableCellRenderer that is asked to render that particular column. I would assume that the default behavior is what you want, i.e. that the renderer uses toString() on the Object.

  • New Mac Air and HP monitor.  The monitor only displays the background.  How Can I get both to display the same thing?

    I have a new Mac Air and want to use my HP Monitor HPLP2475w to save $$.  I attached it to the Mac Air but all I get is the background of my laptop.  How do I get this to match or use in the dual mode.
    Thanks,

    Hi Jackie,
    Welcome to the Support Communities!  How did you attach the Macbook Air to your HP Monitor?  What cable did you use?  The article below will explain how to setup the display.  Video Mirroring is the option that will allow you to see your computer's display on your HP.
    OS X Yosemite: Connect a display
    http://support.apple.com/kb/PH19035?viewlocale=en_US
    You can easily view the contents of your Mac on a display, like an Apple Thunderbolt Display, or on your TV.
    Connect an Apple Thunderbolt Display: 
    Plug the display’s cable directly into the Thunderbolt port  on your Mac. 
    Connect an Apple LED Cinema Display: 
    Plug the display’s cable directly into the Thunderbolt port  on your Mac. 
    Connect a TV or display with an HDMI connector: 
    Plug the cable directly into the HDMI port on your Mac. For more information about using a TV, see Use your TV as a display. 
    Connect a display with a VGA connector: 
    Use a Mini DisplayPort to VGA Adapter to connect the display to the Thunderbolt port  on your Mac. 
    Connect a display with a Mini DisplayPort: 
    Plug the display’s cable directly into the Mini Display port  on your Mac. 
    After you connect your Mac, the contents of your screen automatically appear on the display or TV. 
    If your display uses a video port that’s not available on your Mac, you may be able to use an adapter to connect your display. For example, If your Mac doesn’t include an HDMI port, you can use a Mini DisplayPort to HDMI video adapter with the Thunderbolt port on your Mac.
    OS X Yosemite: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH19039
    Set up the displays for video mirroring
    Video mirroring shows the entire desktop on each connected display.
    Choose Apple menu > System Preferences, click Displays, then click Display.
    Set both displays to the same resolution.
    Click Arrangement, then select Mirror Displays.
    Enjoy your new Mac!
    - Judy

  • How can I get a count at the same time I am inserting into another table

    I have a requirement where I have to find out the count(number of records inserted into another table) at the same time I insert into the table:
    Like
    I am copying records from table B to A, while doing this I have to find out how many records I've inserted since I need this count in subsequent steps
    INSERT INTO A
    SELECT * FROM B
    how can I store the count into any variable while doing above statement
    Please advice

    No, Warren that doesn't work!
    SQL> set serveroutput on
    SQL> declare
      2     vCtr  number := 0;
      3  begin
      4     insert into emp2
      5     select * from emp;
      6
      7     select count(*)
      8       into vCtr
      9       from emp2;
    10
    11     dbms_output.put_line('rows created '||to_char(vCtr));
    12  end;
    13  /
    rows created 15
    PL/SQL procedure successfully completed.
    SQL> declare
      2     vCtr  number := 0;
      3  begin
      4     insert into emp2
      5     select * from emp;
      6
      7     select count(*)
      8       into vCtr
      9       from emp2;
    10
    11     dbms_output.put_line('rows created '||to_char(vCtr));
    12  end;
    13  /
    rows created 30
    PL/SQL procedure successfully completed.
    SQL>

  • How can I get iCloud to use the same Apple ID on my Mac and iOS devices

    I have an Apple ID that syncs between my iPhone and iPad. The Apple ID on my Mac is different and I cannot change it so it uses the same Apple ID and iCloud account.

    Sign out of the Apple ID on your Mac and sign in to the one you want to use. Go to System Preferences>iCloud>Sign Out
    Then sign in to the Apple ID you use with your iPhone and iPad.

  • Logicboard replacement came with new serial that stops me from connecting w iMessage and FaceTime. Applecare ran out and now I am sure it is this issue... How can I get apple to honor the serial mess up?

    The story is that I have an imac i7 that was still under Applecare when the logicboard coraked.
    I brought it in for repair and got it back. Somehow imessage and facetime would never connect anymore and come up with connection errors yet everything else worked. I tried all tens or hundreds of suggestions over hte last few months and nothing worked.
    So I resorted to a clean hard drive repartitioning and install of Mountain Lion.
    To my surprise: it sill did not work.
    That;s when I found an obscure post that I am quite certain is the problem: the poster had the exact some symptoms I had and NOTHING worked. Hrs of phone support etc. Until it dawned on him that he had a logic board replacement after which the issue occurred. He found that his serial was no longer the same as the original item and came up as invalid on the apple website and was not listed in the "About" of his iMac.
    I immediately recognized the recent support symptom and motherboard replacement and checked the rest. And behold it is all exactly as he said. He had to bring it back to the service center and they put the original serial back in and everything worked again.
    Here is my problem: months of troubleshooting have passed and my iMac went out of Applecare warranty. Support does not warrant an exception for the serial online and the service center wants to get paid    I am not wealthy. This computer is my life and I need them to change the serial back to what it was when I purchased the machine. Can someone suggest how I get help. Apple is acting like M-soft in this respect.

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • I lost my sync key and dont have access to my other computer and dont want to lose data on server by resetting it. How can I get my sync key?

    I have tried words I usually use for passwords and they don't work. If I knew the acceptable format for the sync key, I could try others. But maybe the sync key is the same long number they originally sent me. I am in Chile and my laptop hard drive crashed and I needed to replace it. I can't access my sync key on my desktop in the United states but I want to download my syndc data to my laptop with the new hard drive but I dont have the sync key and I dont want to erase the sync data on the server by resetting the sync key.

    I'm sorry but "you should have written it down" simply isn't a good solution. Having the keys at all is a bad idea in my opinion. The keys should be stored in your account and if you authenticate with a password, it should use that key. If you can't keep your password private or secure, that's your problem. The problem with the keys is, you can't delete your account and "start over" if you so wish. What happens if your machine locks up after you sign up and you have no time to write down your key?
    You can request a new password, but can't be reminded of your key? This is nonsense. I have had no such headaches with XMarks and I'm trying to find a reason to keep using firefox sync with such an obviously user-unfriendly approach. We're humans, not machines.

  • How can i get icloud to use the same id as my iphone

    how do I change the the icloud id to the id on my iphone

    Hi sheaney,
    You can change the Apple ID in use on your iPhone using the steps in this article -
    Sign in with a different Apple ID on your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have just uploaded my iWeb site to a FTP host and most of the site is ok however a lot of the text has gone very strange!  How can i get it to publish the same as I designed it?  Thanks in advance....

    Please help!  I have just uploaded my iweb site to a FTP Host and most of the site is ok however a lot of the text has gone wrong!  Many thanks...

    Maybe you could let me know which hosting service you are using so that I can add them to my list of those NOT recommended for iWeb users!
    I just dealt with one today who claimed the iWeb sites were incompatible and that the first line of code should be deleted from every HTML file before upload to their server.
    They didn't even offer the information that it would be a lot easier to modify the .htaccess file never mind offer to do it for a customer.
    Nobody should expect to pay for service like this and the answer is to dump them and go to a company that gives you some value and support for your money. If the ones on this page don't meet your requirements for cost and service...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    ... search this forum for those recommended by other users. There's a long list of them.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I use 2 to 3 computers for my photo retouching, can I get them activated with the same serial number? for Photoshop Elements 13, and premier elements 13

    I use 2 to 3 computers for my photo retouching, can I get them activated with the same serial number? for Photoshop Elements 13, and premier elements 13

    You can activate any two of them at a time, but if you want to use it on a third computer you will need to deactivate one of them before you can do so. To do that, go to Help>Sign Out.

  • I'm new to Photoshop Elements and just getting started.  While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon.  How can I remove this so that the photos will be restored to normal?

    I'm new to Photoshop Elements and just getting started.  While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon.  How can I remove this so that the photos will be restored to normal?

    Go back to the editor and close the photo there.

  • How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    no - you simply have to select the option to print mucliples of a photo on a page
    select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
    LN

  • How can I get elements 11 to work with 16 bits photos?

    In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

    No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
    Either way is expensive compared to photoshop elements.
    http://www.adobe.com/products/cs6.html?promoid=JOLIS

Maybe you are looking for

  • Another dual-SATA Firewire 400/800 case that is Leopard compatible?

    Looks like OWC is out of stock for 9 days, and I need to get one sooner than that. I'm look for a non-RAID configuration allowing me to have two 500 GB SATA hard drives which I already have and place them inside a single case that has both Firewire 8

  • HR Form Editor - how to display text on payslip

    Hi Experts, I have an issue in HR Form Editor ( TCode PE51). In the earnings window of a payslip I have a wage type 2041(Ticket Fare Payment). At the time of evaluation if there is a value for this wage type then some text message has to be displayed

  • BLOB Storage

    How can i restrict BLOB storage to store only Video files ?

  • Re-allocating Actual Costs and Actual Work from one project to multiple projects

    My company would like to track costs in one project and then re-allocate those costs to multiple projects.  Example: An end user would submit a timesheet against a task named 'Analysis' for Project A.  Once accepted and published, the costs for those

  • Looping error message re Network Settings

    When trying to review Network in System Preferences a pop up error appears:  "Your Network Settings have been changed by another application" This message is in a constant loop - the only way I can get rid of it is to force quit System Preferences. T