When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup...  Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Similar Messages

  • HT1386 I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

    I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

    how new is the Notebook ?
    Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB

  • I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

    I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

    When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

    Hi Amir.09395340646,
    Welcome to the Support Communities!
    What app are you trying to download? Is it iPhoto for iOS?  What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again. 
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311?viewlocale=en_US
    If the above did not resolve your issue, follow the troubleshooting steps in the article below.
    The link includes the complete details and screenshots, but I've highlighted a few points for you:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    - Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
    - Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
    - Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
    - Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
    - Try resetting (turning off and then on again) your Wi-Fi router
    - If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
    I hope this information helps ....
    - Judy

  • How I can solve this problem or manipulate it ports 80,443 are closed by ISP and they don't want to open it

    hi,
     I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open  any of it 80,443 ect.
    suppose If I want to use Essential server 2012  how I can solve this problem , essential wants domain name whith A record.
    I asked DDNS service provider if I lease from them a domain name whith A record  would that help to open or manipulate the port 80,443  they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.  
     so what can be a solution the ISP provider won't open this ports , how I can solve this problem .   domain name with ip adres is not helping so what it's go to help?
    thanks
    johan
    h.david

    The domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
    If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Hello apple guys, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

    hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

    So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac".  I really, really miss Steve Jobs!

  • I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

    I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

    That pretty much eliminates all the user-serviceable parts the phone has.
    When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service.

  • Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

    hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
    and this is an pic for the problem

    There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

  • I want to change the payment mode to credit card the problem that am still having some cents in my account how i can fix it ?

    I want to change the payment mode to credit card the problem that am still having some cents in my account how i can fix it ?

    You need to contact Apple so they can zero out the balance for you >  Contacting Apple for support and service

  • I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

    I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

    All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?

  • HT201210 when i want to restre the iphone so i can see an error 3194 how i can solve this problem

    i am trying to restore the iphone through itunes and i can an error which is 3194 so how i can solve this problem

    Check Hosts file of comp. It must point to Apple.
    Would have already seen
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

    when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

    Step by step, how did you arrive at seeing this agreement?

  • HT1926 having problem up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

    I am having problems up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

    Hello hurleygirl63,
    Thank you for the details of the issue you are experiencing with iTunes.  I recommend following the steps in the article below:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

    I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?

    If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for

  • Qosmio F45 - DVD and CD ejecting issue

    I have a Toshiba Qosmio F45 and when I got the computer in september it had a problem of not warning to read or write to certain disks. Now it's getting worse to the point where when I insert a disk. It spits it out not reading from it at all. The dr

  • FCP to WMV

    i want to export a a movie from FCP to windows media player but when i do it does not export the whole thing only 28 sec of it. the whole thing is about a minute long. any ideas why it won't export the entire movie? i already checked for spaces in th

  • How can i get a brand new case for my iphone

    I NEED TO GET A BRAND NEW CASE FOR MY IPHONE BECAUSE MY IPHONE IS DENTED ON THE BACK AND SCRATCHES ALL OVER THE PHONE, IF SOMEONE CAN HELP ME I WILL APPRICIATED.

  • Create a Client Proxy for consume wsdl via https URL return a 110 HTTP code

    Dear all. I has new in this forum, and i have a problem when trie to create a client proxy from external WSDL, using https URL, system returns me a 110 http code. For others externs WSDL called via http don´t have any problem, and create client proxy

  • Testdrive for 64 Bit Linux Systems?

    Will there be a NW4 Testdrive for 64 Bit Linux Systems? Regards, Tobias