When I create a new track and region, the new region copies the previous region contents; why?

In trying to experiment with new instruments included in 10.1. , I create a new instrument track and region, nominate the new instrument, and... I see that the empty region I just created isn't empty at all, it is filled with the notes created in a previous track, and no sound... is this a glitch or am I doing something wrong?

You can highlight the URL in the Location Bar of a Tab you want to duplicate and use '''{Alt + Enter}''' or you can '''Middle-click the Reload button''' at the right-side of the Location Bar (no need to highlight the URL there).
Both of those methods will work whether you have '''''Tabs on Top''''' selected or not.

Similar Messages

  • Is it possible to have track and region parameters boxes under the inspector hidden by default when creating a new track?

    I often need to access the effects section and/or select a different midi instrument and have to manual minimize these boxes. It would be nice if I could have these hidden by default as I'm accessing the portions covered by the track and region parameter boxes more frequently than I'm accessing the boxes themselves.
    Thanks!

    Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
    Tracks, you record your music on
    There are three types of those Tracks.
    MIDI Tracks (aka Software Instrument Tracks)
    Audio Tracks (aka Real Instrument Tracks)
    Drummer Track (only one per Project)
    Global Tracks
    These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
    Arrangement Track
    Movie Track
    Transposition Track
    Tempo Track
    Master Track
    This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
    Regarding the Tracks you record your music on,  you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that  is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
    I will explain all that in much more detail in my manual "GarageBand X - How it Works".
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select.  Anyone else noticing this?

    When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select.  Anyone else noticing this?

    Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
    Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
    http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
    http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
    ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

  • Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

    When a new album is created it will fill with whatever is in the right hand window,  If you're in the Events or Photos mode it will contain all photos in the library.  Yes, strange behavior.
    OT

  • I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

    I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

    Sorry, no further idea what can cause this.
    Is the shortcuts file truely saved to disk? You can find in the user path, where the preferences and presets are stored for PS. Or if you go to the dialog again where you change shortcuts, is it reverted there too?

  • CMSUnexpectedException when I create a new track or copy.

    Hi,
    When I create a new track or copy track CMS'll retrun an error
    Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
    I restart JDI but it still error.
    What should I do?
    Regards,
    Khempat

    I find a answer in topic ht[CMS SCA imports fail & CBS error while activating|CMS SCA imports fail & CBS error while activating]
    tx for ur care

  • When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

  • When I create a new email and start typing, I get an error after two characters

    This has been bothering me for months.
    When I create a new email and start typing, I get an error after two characters (see below). I thought maybe it was a particular person's contact, or it was because I typed too fast, but it is not. Doesn't matter what email address I use, or how long I wait, the first address errors and I have to erase it and start over. Sometimes I have to try several times.
    Very annoying. I am using the latest build of Safari on a Mac.
    Any help would be greatly appreciated.
    Bryan
    <Image Edited for Personal Information>

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • When I create a new instrument it defaults to the EVP88 Electric Piano

    Why is it everytime I start a new project and create a software instrument, or I add a new instrument to an existing song, it defauls to the EVP88 Electic Piano?  It started doing this after I plugged in a USB controller keyboard so I would have to try and play keyboard parts on my iMacs keyboard.   I called Applecare but my support for Logic has run out (I didn't use my Logic for a long time after installing it, logn story)  so they wanted me to purchase a really expensive support package but I'm not a professinal just a regualr guy.  The tech told me that it always defaults to EVP88 when yu create a new trick, bu I don't remember it doin that when I first statred. Please someone help me with this!!!

    Hi
    When you make a new track, un-check the "Open Library" checkbox.
    CCT

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    Settings -> Mail -> Signature and edit it to whatever you'd like.

  • When I create a new document the icon doesn't show up in the finder

    When I create a new document and close it the icon is not visible in the finder until I do a search. Then it shows up. I can't move it to other locations.

    So where have you saved it to?
    When you search for a file that is a search result not actually a folder.
    The real location of the file should be shown in a chain of nested folders along the bottom of that window and you can open the folder that the file is in by double clicking on the enclosing folder's icon.
    You need to pay attention to where you are saving files or you will have trouble opening the correct one later.
    If you are new to the Mac go to http://www.apple.com/support/mac101/
    If you have come from Windows the method of saving, finding and organising files is not too dissimilar.
    Peter

  • Pasteboard size is huge when I create a new document

    When I create a new document or open an old document in InDesign CS4, the pasteboard is huge. For example creating an 8.5x11 document results in a pasteboard that is 36 inches wide buy 12 inches high. I have read all the solutions posed in other threads and none of them help restore the pasteboard to a reasonable size.
    I typically create a document with 0,0,0,0 for margins. Minimum vertical offset for pasteboard in preferences in 1 in.
    I uninstalled and reinstalled InDesign but the problem is still there. The problem is global (any and all documents i open).
    Does anyone know why this is happening and how to fix it?

    Are you sure facing pages wasn't selected when you created the document? How many pages are there?
    The standard pasteboard dimension is 25.5" wide for non-facing 8.5" wide pages. As far as being a waste of space, you'd be surprised at how often you might need to move a page-wide object onto the pasteboard and still have the ability to see or edit the whole thing.
    Peter

  • I need to create a  Notification in CRM WebUI  When we create a new contract

    Hi Experts,
    I am working in Utility Industry and as per the business requirement I need to create a  Notification in CRM WebUI
    When we create a new contract & click on apply button.
    As per my knowledge we are not maintaining Notification information in CRM System. So could you please
    help me to call IW52 during the new contract creation when we click on apply button.
    Thanks
    Roli

    Hello Roli,
    If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
    Calling Transaction Launcher on user action
    BOR object or ITS based Transaction Launcher
    Regards,
    Ashik

  • When I create a new photo album in Iphoto it adds all my photos in the library

    I love my macbook pro but still not fully understanding Iphoto.  When I create a new photo album and drag photos over from a disk it seems to add all photos from my library. When I remove them it removes them from all the albums.  HELP!

    Add the photos from your disc to iPhoto, then drag them from the iPhoto Event or photos to the Album.
    You can delete photos from the Album without removing them from the computer.  If you delete them in the Photos or Events area, they are removed from iPhoto, therefore taking them out of the Album.
    The photos have to be in iPhoto to exist in an Album.  They cannot exist in an Album and not be in iPhoto..
    Hope that helps...

Maybe you are looking for