When I drag a synchonised clip to timeline, can I turn off the video's audio track only without breaking apart clips?

I have preparred many clips by synchonising them with audio recorded on H4N - and have these in keywords.
When I drag them to the timeline, do I have to break apart each clip item to turn off the video's audio track or is there a shortcut to doing this?

For each clip you can go to the audio portion of inspector and uncheck/disable the tracks you don't desire. That would take longer than Tom's method, but I think the audio won't show up as a blank later on.

Similar Messages

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I turn off the beep my incoming callers hear when my phone is busy?

    How can I turn off the beep my incoming callers hear when my phone is busy?

        I appreciate your concern! This feature is unable to be removed. The only way an incoming caller would not hear this particular beep is if a ringback tone is active on the line.
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please

    My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • How can I turn off the phone saying "Call from" #/name when getting incoming call.

    How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts?  I have a LG accolade

    I recommend checking your  prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature. 
    With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
    -Confirm Choices--- Automatic/Always Confirm/ Never Confirm
    -Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
    -Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
    Prompts ---Mode/ Audio Playback/Timeout
    * For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
    * For Audio Playback, set Speakerphone or Earpiece.
    * For Timeout, set 5 seconds or 10seconds.

  • How can I turn off the Download pop up Window from displaying when downloading a file?

    How can I turn off the Download pop up Window from displaying when downloading a file?

    To not display the built-in Firefox downloads window, Tools > Options > General tab, un-check "Show the <u>D</u>ownloads window when downloading a file". See: http://support.mozilla.com/en-US/kb/Options+window+-+General+panel
    If you have some other download manager installed, you will need to see the documentation for the download manager.
    <br />
    You have installed plugins with known security issues that should be updated. To see the plugins submitted as part of your question post, click "More system details..." to the right of you original question.
    *Shockwave Flash 10.1 r53
    *Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''<u>the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.</u>'''
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download links and other information</u>''':
    #** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #** '''<u>or</u>''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
    #* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
    #* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
    #* After the installation, start Firefox and check your version again.

  • Can you turn off the charging feature when using accessories?

    Can you turn off the charging feature when using accessories with the iPad?

    You cannot overcharge the battery when using the power adapter. Once the battery is fully charged, the iPad will no longer continue to charge if it is still connected. I leave my iPad on the power adapter for hours on end - on weekends when I am not at work.
    iPad - Charging the Battry
    http://support.apple.com/kb/HT4060
    About the iPad Battery
    http://www.apple.com/batteries/ipad.html
    These are both worthwhile reading for concerns about the battery and how to properly maintain it.
    I know nothing about external speakers with the iPad since I do not use them - but If the speaker is with a dock of some sort that charges the iPad - you should have no worries. If it is a dock that charges the iPad - I know of no way to turn off the charging feature, but it will not shorten the life of the battery anyway as long as the battery is properly maintained and cared for.
    Message was edited by: Demo

  • Can I turn off the setting that displays the height and width in a little black box when using the marquee tool?

    In Photoshop CC, on a mac...
    When using the marquee selection tool, a little black box pops up next to the curser and displays in real time, the height and width of the selection.  The same annoying box also appears when dragging an item with the move tool, displaying the numerical location of the cursor.  Is there anyway to turn off the display of that little black box?  It is driving me bonkers.

    Under the preferences cmd/ctrl-k click on "Interface". At the bottom of the UI is a drop down box for show transformation. Set that to "Never"

  • All of a sudden, I need to use my password to drag a file to 'Trash'; how do I turn off the password requirement?

    I've had this MacBook Air for 9 months and never had to type a pasword in so I could drag a file to the trash. Yesterday, the computer started requiring me to type my password in so that a file could be dragged to 'Trash'. Why did this start happening, and how do I turn off the requirment for my password?

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the Recovery screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • I put incorrect passcode to unlock my iphone and it disabled my phone, instructions say to restore but when I try to i get error msg saying to turn off the find my iphone app in order to restore, how can i do that w/o being able to get into my phone ???

    after trying to remember my new pass code and failing, my iphone disabled and is now telling me to connect to itunes, ive done that and tried instruction to restore from back up however when i do that i get an error msg saying that i need to turn off the app find my iphone to b able to restore, i cant do that tho because i cant use my phone and i dont see app on my computer on itunes either???what do i do >??

    This the Activation Lock. Read here: http://support.apple.com/kb/HT5818
    The only way is to login to iCloud with your computer browser and wipe the iPhone.
    If you can't then you have a brick, Apple won't help and AL cannot be bypass.
    https://www.icloud.com

  • How can I turn off the Gloss Optimizer on my Espon when printing PDFs?

    I am using a Mac Pro with Mountain Lion and the Adobe CS6 package that came with Adobe Acrobat X (version 10.1.3).
    As with the other programs in CS6, when I print I cannot turn off the Gloss Optimizer. I used one cartridge in on day. Expensive to say the least.
    I checked out the color profiles for the printer and Adobe does not have a "SPR1900 Plain Paper / Bright White Paper" to select. They seem to have everyting Epson offers but that. They do have something called "SPR1900 Standard". Don't know what that means and it does not solve the problem. I suspect the issue is that all the choices override my printer commands. Has anyone else had this issue and, if so, have you arrived at any solution.
    I called Adobe about this and they are aware of the issue. They cannot resolve it on the fly. I have to wait for them to address it and then for it be included in a major release (not an update). Very frustrating. Any help would be appreciated. Thank you.

    Hi,
    You may not have a wireless network adapter.
    If it is not in Network Adapters and you have no Device Manager errors or disabled devices under Network Adapters then that would be the case.
    Jaco
    Errare humanum est.

  • How can I turn off the preview (overview) automatically executed when I launch Image Capture?

    I love using Image Capture, but every time I launch it, it automatically does a previes of my scanner's flatbed.  Most of the time, I don't use the flatbed.  I use the feeder to scan multiple pages. 
    My question is this:  Is there any way to turn off the automatic preview (overview) that Image Capture executes when it's launched?
    Thanks in advance for any and all assistance!   

    Not a direct answer.
    From Image Capture Help:
    Scan pages with a document-feeding scanner
    When you scan a document with a document-feeding scanner, the same settings are used for all the pages in the feeder. If your pages need different settings (for example, some are grayscale and some are color), separate them into different groups.
    Before you begin these steps, you need to open your scanner. For instructions, see one of these help topics:
    Scan an image
    Scan an image with Image Capture
    Scan an image with Preview
    Place the pages in the scanner’s document feeder.
    Turn on the Use Document Feeder option, if it’s present.
    Set scanning options.You may need to click Show Details to see all the available options.Here are some of the options you can set. The options available to you depend on the scanner you’re using. Some options aren’t available on all scanners, and some scanners may have more options.
    To choose the type of image being scanned, use the Kind pop-up menu.Choose Text for black-and-white images with high contrast, such as text. Choose Black & White for grayscale images. Choose Color for color images.
    To scan both sides of a page, select Duplex.
    To choose a size for the scanned image, use the Size pop-up menu.
    To choose where to save the scanned images, use the Scan To pop-up menu.If you choose a folder, the images are stored in that folder. If you choose an app, the images are opened with that app.
    To adjust the colors or exposure of the scanned image, choose Manual from the Image Correction pop-up menu, and adjust the controls.If you don’t see the image correction controls, scroll down or make the Scanner window taller.
    Click Scan.The scanner scans the pages one by one.

  • Can i turn off the vibration when i plug my phone in

    Does anyone know how I can turn off the sound and/or vibration that occurs when I plug my charger into my phone?

    Hello,
    There is no possibilities to do that, even if you remove the vibration in silent mode on the iPhone's settings.
    I would eventually advise to put your EarPods in when the sound is ON so you won't hear or feel any sounds/vibrations.
    There is no other way to avoid the sound/vibration for stopping.

  • How can I turn off the information that prints when a photo is emailed to printer?

    I need to stop the printer from printing the first page when sending an email to the printer's email address.

    There currently isn't an option to turn off the printing of the email.
    I am an HP employee

Maybe you are looking for