When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?

Maybe find a local who can translate for you. I don't know what to tell you for dealing in another country for service on your computer.
I can offer you something you can do if you want to give it a try. You'll need a backup of your data in your Home folder because you need to erase the drive. You'll also need a solid, preferably fast, internet connection.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Similar Messages

HT4623 I updated my ipad from IOS 7 following prompting and ended up with connect to itunes icon. When trying to restore, the process keeps aborting after 30 mins with an unknown error message. Any ideas to overcome this problem?

Earlier today I was asked to update mu IOS which I did through my wifi (power connected). On return I just had the "connect to Itunes" icon. I've tried to restore the settings as suggested on the summary page but after downloading and verifying the connections and device the restoration locks up after about 30-40minutes due to an unknown error.
Is there anything I can do to overcome this?

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

When i try to open piano roll it is stuck on the same track regardless of whether another track is selected. I cannot elect a new synt track and pull up in piano roll

When i try to use piano roll it always goes back to a single track. Even if I select another track or adda new blank track it will not open.
Also if I add notes to the track that opens I cannot hear them when i place them on piano roll

There's a little icon in the top left corner of the piano roll window that looks like a pair of chain links. If that is selected (goes yellow) then the piano roll editor is linked to the arrange page region selection(s). Sounds like what you want.
It's really useful sometimes to be able to unlink, so that you can keep one piano roll open (to watch the timing of the notes, for example) and not haver it change each time you do something in the arrange page.
Also, next to it is a little man running icon. If that is selected, the piano roll will chase the cursor. If not selected, it won't. Also useful sometimes.
Hope that helps

Quantize Strength - Piano Roll Window

How do you change the quantize strength in the piano roll window for Logic 8? In Logic 7, I would use my short cut to open the Extended Region Parameters window. In Logic 8, this seems only possible in the arrange window. Couldn't find this info anywhere in the manual or online.
Thanks in advance.

Hi Armen,
I haven't used 7, but I found what you described in 8. On the upeer left are all sorts of quantise parameters.
regards, Erik

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this?

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this? This is the way I scrolled for MIDI editing on Logic 9

Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
it's here where one can configure a mouse device.
Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
Have a nice day!

How to edit multiple regions in one Piano Roll window

I edit multiple regions in one Piano Roll window at the same time. (It is very handy way of editing especially in huge orchestra projects.)
I can see midi contents of all selected regions in Piano Roll at the same time.
1) But how to choose certain one region of many selected to edit it?
2) And how to edit all at once?
Hope the questions are clear enough.
Thanks.
Dmitriy.
iMac (27-inch, Mid 2011) 2,7 GHz Intel Core i5. 16 GB 1333 MHz DDR3.
OS X 10.10.2

First of all, the Piano Roll has two mechansim, of what it is displaying.
Selected Track: This displays all the Regions that you select in the Tracks Window
One Track: Selecting one Region in the Track Area displays all the Regions of tha tTrack in the Piano Roll. If you select multiple Regions in the Tracks Window, then the last selected Regions counts.
Whatever Regions are now displayed in the Piano Roll Editor can be edited. Select the MIDI Events and apply the command.
You can also apply edits directly to the selected Regions in the Tracks Window.
I explain all those little details in my graphically enhanced manuals ("Logic Pro X - How it Works")
One thing to be clear about:
Tracks Window: Any edit is applied to the selected Regions
Piano Roll Editor: Ay edit is applied to the selected Events
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Is there a way to show/reveal the piano roll (or score) from a midi input when recording an audio track in Logic 9?

I'm trying to record audio tracks in Logic 9 over midi tracks I've created using a software instrument. I've done this before, and there used to be a no problem in seeing the midi information in the piano roll or the score while recording audio tracks, but it now impossible to reveal. Has ayone else exerienced this? Was there a change (update) that eliminated that as an option? Or did I do something in preferences somewhere (unbeknownst to me when doing it) that has caused this? Thanks for any suggestions.

Just open the piano roll fro the regions you want and deselect the chain icon at the upper left.

Why when I move a midi event in the piano roll the film does not move with this event?

LOGIC X 10.0.3. Why when I move a midi event in the piano roll the film does not move with this event?

Film? Have you dropped a movie file into your Logic project as well? You need to be a little clearer.

Logic Pro X. Right-click not working in the piano-roll editor. And colour issues.

I usually use the right mouse-button to open the toolbox under the cursor but this doesn't appear to work within the piano-roll edit window in Pro X. Is this the same for everyone? The right-click works in all other windows. Seems pretty odd.
Also is it just me who finds the near-black background very oppressive? I worked in front of Pro X for several hours yesterday and was left wishing I could change the background colour of the main and edit windows. Is there any way to do this?
I also really need to be able to access custom colours for the colour palette as the new palette doen't sit at all well with me. Any ideas anyone? The manual states that if you double-click on a colour it should open the colour editor but it doesn't.....

It turns out that if you assign the right button to 'Open Tools and Shortcut Menu', it works in the piano roll. It's obviously a bug which should get ironed out.
The other thing that's driving me nuts though is that when I change tools in the main window, the pointer still appears like an arrow, even though its function has changed. When I pass it over a region, it usually changes to to the correct icon - but not always! Aarghhh I'm going back to Pro 9 for now......

Why do the piano roll and event editor act differently?

In Logic Studio 9, this wasn't the case, but there are numerous examples now where editing MIDI in the event view acts right, and editing the same MIDI content in the piano roll acts wrong. It's extremely frustrating! Personally, I think who ever modified the behavior of the Piano Roll in Logic 10 should be fired on the spot. I'd downgrade to 9 in a heartbeat if it was still available in the App Store.
Two examples off the top of my head:
- Selecting a MIDI note in the event viewer selects ONLY the note and not all the MIDI objects that fall within the time span of that note. This is not the case in the piano roll as it assumes that when you select a note, you want *more* than just the note you're clicking on. This is a stupid assumption and is new in 10.
- Dragging midi notes in the piano roll randomly deletes all non-note events and changes the action from "move" to "copy" where the only workaround when the piano roll gets stuck in this state is to do the same action in the event viewer.
Please rollback changes made to the piano roll in 10 back to what 9 was as I've wasted countless hours of my life trying to work around these flubs!

Try making a blank project with no settings at all and just add a bass from whatever plugin. Make sure there are no plugins at all on the track (not just muted but removed). Then try again.
I believe palying on the pianoroll with the mouse plays at 127 velocity but I ain´t sure. How about the output? Does it clip/go red? Then it will disort.

Why was the link button removed from the piano roll?

Why was the LINK (chain) button removed from the piano roll? This makes Logic X useless to me as I can no longer compose or perform new lines based on previous midi performances. PLEASE BRING IT BACK!

I miss that button too and just filled out the LX Feedback form (Menubar -> Logix Pro X-> Feedback) with the following text. Maybe if you guys did the same, we had a chance revive this essetial feature!!!
thanks!
Sebi
Hi there,
it seems as if the Link Button (Yellow chain symbol) has been removed from the piano roll for no reason. In Score View it is still there.
I (and probably more users) absolutely NEED that Button to decouple the content of the piano roll from the selected track/region AND to use multiple piano roll windows with independent content.
- For transscripting (Mute/Solo Audio regions while editing a Midi-Region)
- For arranging. Edit 2 different midi regions both in separate Piano Roll windows
- For recording. "Reading" Drum-Patterns while recording the Bass e.g.
Please bring that button back or explain why it was removed
Best regards,

Enlarging Sequencer Piano Roll Window

I know I've seen this somewhere but for the life of me I can't find it or work it out!
I open the sequencer window for a midi track and the piano roll displays on the left and C6.
I need to be editing anywhere not just C6.
If I use the create tool and click on the last note at the bottom the window will scroll up slightly but of course this is pretty ordinary.
There is an answer but it is not obvious.
This is driving me crazy and let me tell you it's not a long trip :-)

I knew I had seen the answer to this somewhere - its just that I don't use midi often/at all really
http://www.adobeforums.com/webx/.3c0639bd/1
There really should be something to indicate this - maybe a change in mouse cursor or maybe a big flashing neon sign with a giant arrow pointing to the answer.
PS Anything past the word 'cursor' you could probably ignore :-)

Why can't i see my midi in the piano roll of logic

I can create a track in a midi region, yet when I select the midi region the data does not appear in the piano roll! It did uintil I deleted a few tracks and now only 1 midi region appears and I cannot select another. Is this a bug or am I doing something wrong?

This guy posted your solution on another message:
Re: Deleted Fax Modem from Tiger and Now I can't create a new one.
Posted: Jul 28, 2006 9:43 PM in response to: Mitch G.
The Fax modem printer is formed when you choose Fax PDF... from the PDF button of the Print... dialog box. In other words, do it once, even if you do not complete the fax, and it will be there.

View two midi events on the piano roll

Hi, my issue is a follows:
Take two midi events on two separate channels (eg kick on inst 1 channel 1 and snare on inst 2 channel 2) - when highlighting both strips in the arrange, then opening the piano roll (cmd+6), I used to be able to view both. But in logic 9 only one of them can be viewed.
I can view both on the piano roll on the arrange, but that's less desirable (takes away space on my arrange screen).
Any ideas? Thanks a lot.

Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
Quit Logic Pro
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Note: If you cannot find any of the files mentioned in this tip,you didn't follow the instructions exactly as written

How do you get the piano roll on logic pro x to show 1/64th notes?

On the piano roll in Logic Pro X the grid only shows like 1/16 notes. I want to be able to zoom in and have the grid at 1/64 notes.

Transport is at the top center of the Logic window. If you click on the "/16" which I circled in red, you will get a drop down menu to change the the note length you want.
Your transport may look different and might not have the "/16" right now. I have a custom transport displayed. "Custom" can be selected by clicking the "gear" icon on the left of the transport. Various options for what to display in the transport can be accessed by right-clicking in the transport bar and selecting "customize transport and display." The option you are looking for will be in the "LCD" section - choose "custom" and check the box for "signature division."

When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?

Similar Messages

Maybe you are looking for