When I enter my user name and password for my e-mail account, the page won't open
My e-mail account page won't open after I enter my user name and password on the log-in page. I have vcrified with Suddenlink that my user name and password are correct.
Thanks Peter.
Partial success in that I have been able to get mails onto the iPad - however....
Progress from a previous 'rumage' on problem discussions. I have succeded in setting up the iPad so that it receives emails from the sky address under 'MAIL' on the iPad. However trying to open in the 'usual' way - safari - then sky - then email - enter user name and password - I get the same result - it just returns to the log in menu for sky email with user name and password blank.
I had a previous problem with the sky mail ceasing to show recent mails, frozen in time on the iPad. Somehow by trying some reset instructions I was able to 'unlock' the iPad and all was OK until it 'froze' again. This time I clearly screwed up attempts to unlock, resulting in not being able to access email accounts via the Sky site !!
Similar Messages
-
while my macbook pro will log on successfully to itunes, the appletv times out every single time and i cannot log on.
while my macbook pro will log on successfully to itunes, the appletv times out every single time and i cannot log on.
-
Time Capsule won't accept my user name and password for access - Help!
Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers! -
I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.
Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks. -
I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?
Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya -
Trying to update my apps on the iPhone 3. When I type in user name and password, I get the message "Cannot connect to iTunes Store" How can I connect?
I have the same problem. Any suggestions?
-
On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks
HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix -
After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page
After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help hereHello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen -
TG797n v3 log on to 10.0.0.138 User name and Password for wireless set-up
I have a TG797n v3 on Windows 7 to a Dell XPS via ethernet cable. Has been working fine, but. . . just aquired an iPad Mini for family use.When trying to configure the iPad Mini, I can't get past the log in requirements of the "found" wireless network. My laptops read it OK but the iPad keeps asking for a Password for the Telstra***** wireless network. I have tried every conceivable password I have ever used without success.I tried resetting the TG797, (by switching off the power for 1 minute, and pressing the rest button for 20 seconds, and leaving the power on and pressing the re-set button),and now it is asking for a User name AND a Password to enable log in to 10.0.0.138. I can't even get to the set-up page anymore!! I have re-installed the software from the CD that came with the T-gateway, but at no stage does it ask for a password. It asks for the SSID and the Wireless Key, but nothing else! and connection to the internet is established.(Otherwise I couldn't type this, could I?) So, where, and how, do I either retrieve the Password hidden in the TG or reset the password the iPad is looking for???I have configured the TG797 by disconnecting and re-connecting (no passwords asked for) I have searched all the Help topics and they ALL say " Just enter your User name and Password" . . . yeah, great if you can remember it or even resetit!! Please, someone, there must be a simple (or complex) answer as a solution. Thanks in advance, Ian King. (Telstra help, . . . anyone?)
Hi dumbojojo,
Im sorry to hear that you are having difficulties,
The password you need is located on the underside of you modem unless you have already changed it yourself. It will often be listed as a WAP PIN.
If this doesnt help please see here Change wifi password or here WiFi Troubleshooting
Finally, you are still having issues, please contact support on 133933 or Live chat here http://tel.st/hsc3
Regards - -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
Wht is default User name and password for the J2ee server
Hi , All
I had downloaded JSC for evaluation to get to creator hero ....
After Complete Instalation I had started PointBase then start default Server Domain1
when I try to start the deploy tool for that wht is username and password 'coz while installing server it doesn't ask me for user name and password for domain1......
even same in apllication server .... username ==?? and pwd =??
help me out...
Thanks in adv..
--Sudhiruser admin
password adminadmin -
Forgot User Name and Password for Parental Controls
I apparently have forgotten the user name and password for the parental control feature in itunes. How do I recover the information or unlock the controls?
I tried entering the same information as my computer user name and password and it does not work for locking Parental controls. What is weird is I can Log on to Itunes and my computer but it will not lock parental controls. What I am trying to do is keep anyone from changing the settings. Again I enter the same information as my computer but it DOES NOT WORK!!!!
-
How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox
How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.
The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ -
How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?
Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect. Consequently, I was and am constantly changing it. Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes.
Barring the above, how about a way to merge all of the Apple IDs and passwords into one.
Maybe you are looking for
-
Mail I have received from MSI?
In attached quote is a mailing I have had with someone from MSI, Quote Dear Peter, Please check the attachment again. Sorry for any inconvenience caused. Thanks for your supporting MSI product. Please feel free to let us know if you still have any f
-
Renaming a Project causes error when running locally
The app uses an HTTPservice on a remote webserver. I have been running the same app locally for weeks. I occasionally publish up to the web server and all has been fine. I renamed the project (in the IDE) but now anytime I try to run the app locally
-
I GOT A NEW COMPUTER AND IT WILL NOT LET ME TRANFER MY SONGS OVER
i dont have my old computer nomore. but i want all of my other songs off the other computer that was on there. but i cant seem to get them
-
How do i view calender attachments using ios5
I thought that a new feature of ios5 was the ability to view event attachments inside the calendar. I can not do this and am wondering if there is a problem and if someone knows the solution.
-
Lightroom Image Looks Different than in Windows Viewer/CS5/etc.
I've seen this discussed elsewhere, but I believe the nature of my issue may be a bit different, so please excuse the repeat inquiry. I'm currently using Lightroom 3 on a 17' Samsung Syncmaster 920NW on two different desktops. The hardware configurat