When I export from the timeline in Final Cut Pro HD, I get a general error message

When I export from the timeline in Final Cut Pro HD, I get a general error message and the export quits. Any ideas on a fix?

Also, if I remember correctly, Final Cut Pro HD was version 4.5. Is this what you are running?
If so, what version of OSX and Quicktime are you running?
x

Similar Messages

  • FCPX: In Event Library: how to know if a video was used in the timeline of Final Cut Pro X?

    In Event Library: how to know if a video was used in the timeline of Final Cut Pro X?
    An example: In Premiere Pro, the whole video is added to the timeline identified as used in their video library. Facilitating our work on a big project, not to repeat videos. You can do this in FCPX?

    The way it works in FCP:
    Working from the Timeline Index, you can see lists of all clips in the sequence and their location in the timeline.
    You can also do a search (kevn) to narrow the results.
    Russ
    hth.
    Russ

  • I have put several clips with transitions into the timeline in final cut pro. There are two clips which are followed by transitions which do not play at the right speed. It is extremely frustrating, can anyone help?

    I have put several clips with transitions into the timeline in final cut pro X. There are two separate clips which are followed by transitions which do not play at the right speed. I'm at a loss as to why this is happening - any thoughts/help?

    The two HD clips were purchased from itunes (MPEG - 4) and converted to .mov for use in Final Cut Pro. Project properties - 720p HD 1280x720 (60p)
    Is this enough information?

  • HT1338 why I can't do capture from the camera in final cut pro x?

    why I can't do capture from the camera in final cut pro x?

    why I can't do capture from the camera in final cut pro x?

  • Best way to export from Motion 2 into Final Cut Pro 5, working in DV?

    I am working in DV in Final Cut Pro 5, and I would like to get the best quality from anything I bring in from Motion 2 into Final Cut Pro 5, I keep hearing use the Animation codec. I would like to hear from the Panel of experts.
    Happy Thanksgiving,
    Sebastian

    The Best way is to round-trip from FCP. Or simply import the .motn file directly into FCP. If you require an alpha channel and for some reason don't want to bring the .motn file in, Animation with millions+ for the colors (+ is the alpha channel) will work, But if you just want straight DV, you should export a DV file.
    Patrick

  • Exporting from After Effects to Final Cut Pro

    Hi
    Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
    Thanks for any help!
    Matt

    You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
    Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
    Hope this helps.

  • How to do import files from my dslr SD card into the timeline in Final Cut Pro X without losing HD quality?

    The video clips appear to be rendering in high quality while in the import bar, but once i drag the clips into the timeline, the quality drops significantly. I have already exported the project, but the final product still shows that the quality is horrible even playing in quicktime.

    Need much more information. I don't know what your DSLR is. Start with that. Please give exact specs of the media and of the project properties.

  • HT4589 When I go to try and update final cut 10.0 it gives me an error message

    I get an error message that final cut is already installed and when I go to buy it same thing. Any hints on how to get through to Apple on this. I bought the **** program and just updated to Mavricks but can't get FCP to update to 10.1

    You don't have to buy it again. All updates up to now have been free.
    What happens when you open the App Store application and click on "Updates"?
    (You have to log in with the same Apple ID you used to buy the application, of course)

  • FINAL CUT PRO X 10.0.0.8 - ERROR MESSAGES

    24 hours after i was updated to final 10.0.0.8 the software got crazy - i cant publish\export nothing.
    i tried all the export types and i got all the time new messages errors.
    i tried to copy the projects to new events and still nothing get better
    I'm really desperate. what can i do?
    my opreation system is 10.7.5, if ill update my opreation system it will help!?!

    Sivanw1 wrote:
    But this is not a solution ...
    I agree it's not a solution – especially if one doesn't own Compressor. (However, MPEG Streamclip is free and it can do much of what Compressor can do in resizing, transcoding and so forth.) In suggesting PR I was trying to narrow the possible causes.
    One reason for the QT error is "invalid" media, which might be something that works under one set of circumstances and not under another. Another is corrupt clips. Turn off back ground rendering. Delete your render files in events and projects and see whether you have better results.
    Russ

  • Can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter

    can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???

    Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
    Russ

  • When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

    when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

    Because your clip properties do not match your sequence settings.
    It will help a lot if you provide details ...
    FCE Easy Setup
    Sequence settings (vid rate, frame size, compressor)
    Source of your clips (camcorder make/model, etc)
    Clip properties (vid rate, frame size, compressor)

  • When exporting as a quicktime movie, final cut pro crashes!

    When exporting as a quicktime movie, final cut pro crashes about 3/4ths the way through the 12 hour process. I'm saving it to a La Cie 500 GB disc by fire wire. It's worked before but after I converted one SD sequence (that was shot in HD)to a HD sequence, I haven't been able to export it and it won't play straight at anything bigger than 25% size. Please if you have any advice I won't forget it. I'm trying to export as ProHD 1060i.

    I converted one SD sequence (that was shot in HD)to a HD sequence
    How, exactly? And what were the settings of your new HD sequence? DVCPRO HD 1080 60i?

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

  • I keep getting this message when I try to open FCP X.  "The storage location 'brianmassman1' on this computer is already in use by "brianmassman1" on "Brian-Massmans-Computer-7". To access the location, quit Final Cut Pro on "Brian-Massmans-Computer-7" or

    I keep getting this message when I try to open FCP X.  "The storage location 'brianmassman1' on this computer is already in use by 'brianmassman1' on 'Brian-Massmans-Computer-7".  To access the location, quite Final Cut Pro on 'Brian-Massmans-Computer-7' or remove the location."
    I have no idea what this means.  Particularly the part about "Brian-Massmans-Computer-7."  I don't even know what computer that is. 
    I'm guessing it could have something to do with the fact that I've still got FCP 5 installed.  But it's not running.

    Try repairing permission in the Disk Utility and rebooting,

  • HT202159 I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to downlo

    I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Maybe you are looking for

  • In adf,how to delete a file generated on server,when the webpage is closed

    Hi, I have an application consisting of 2 pages. in the 1st page i will give some input details and when i click on submit, some java code is getting executed in the back. That java code generates a csv file in the server location. after succesful ex

  • Mouse scrolling in lion problems

    I'm using a traditional mouse with a scroll wheel.  The mouse scrolling behavior is really odd in Lion and it seems to have something to do with bounce scrolling. Scrolling in apps like Safari works fine and is very responsive where bounce scrolling

  • Query output in EXCEL format

    Hi, How do I redirect the output of the SQL query to EXCEL format. If i say select * from emp with the spooling file name as c:\emp.xls and once I open emp.xls the excel file should be available with each column of the table in separate column automa

  • PO output with Manufacturer Part number

    Hi, We created PO with Mfr Part number and Manufacturer. But in the PO output (print) we are not able to see this information. Why we are not able to see this? Can somebody help on this. Thanks, Venkat

  • Program to add node /  delete node in the tree control via abap object

    Hi all, i am new to abap objects. Can anyone help me out to give program about add node , delete node at a particular point in tree hierarchy. folder1                     -- level 1 subfolder1          -- level 2 *********subfolder1   -- level 3 ****