When i hit snooze in the morning, my pandora either starts playing if it wasn't playing before, or stops if i do have it on. Why?

I have been using my alarm on my phone for years. Just the other day, I go to hit snooze and Pandora begins to play. The next couple times I hit snooze, it happens again. The next day, I actually started playing pandora and when I hit snooze or turned the alarm off, it also stopped the music from Pandora. I had to start it up again. Why is it doing this? Is this a setting issue?

I am still hoping someone can give me the UNIX code that might have been used to cause the problem.
I'm no UNIX guru, but I do know that you can do a LOT of damage from the command line. You can do anything from the Terminal (or booting directly to a command line interface) you want as long as you have an administrator's password. Including deleting every single file and folder from the drive, while your booted to it!
Also, would anti-virus software be of any help in finding any remaining malware that might still be on my Mac?
There's Norton Anti Virus for Mac, along with a few other commercial products. A good one that's free is ClamX. For the most part, all anti virus for Mac is used to find Windows malware attached to emails and other ways of transporting them. There's no known viruses that work in OS X at this point. But there are a few Trojan horse programs and a couple of spyware apps. All of which need you to run them and blithely enter your password in order for them to work. So unless you're being unusually careless, it's hard to get infected with anything that actually works in OS X yet.

Similar Messages

  • HT201436 I change my greeting every day. Each morning when I hit "Record" on the greeting window, I'm routed to Siri. The only way I can record a new greeting is through my Bluetooth ear piece. What's up?

    I change my greeting every day. Each morning when I hit "Record" on the greeting window, I'm routed to Siri. The only way I can record a new greeting is through my Bluetooth ear piece. This all started when I upgraded to OS 7. What's up?

    Start with http://www.pinkmutant.com/articles/Leopard/leospot.html and http://www.thexlab.com/faqs/stopspotlightindex.html, then my mod to Finder's Find at http://www.macosxhints.com/article.php?story=20080229204517495 for what you can change so you can find stuff excluded by the default structure.

  • I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

    I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

    Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

  • After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • TS2756 I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do no

    I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do now?

    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to tether your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_tethering.html
    How to Connect an iPad to an iPhone Via Bluetooth Tethering
    http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
     Cheers, Tom

  • I have just bought a MacBook Air in Madrid, but the keyboard types ç when I hit -, for example, when I hit shift for the bracket sign I get *. How can I re-set it to type what I see on the keys.

    I have just bought a MacBook Air in Madrid, but the keyboard types, for example, ¿ when I hit shift and the semi-colon key, and = when I hit the ! key. What do I have to do to reset it to function normally?

    Go>Preferences>Language & Text>Input Sources
    Click off the flags of the countries you want--like if you need a British keyboard that has a British pound symbol, pick that one.
    When you're done picking, them leave preferences. Now, in the upper right-hand corner of your computer, next to the date, you'll see a little flag. Click on that. You'll see all the flags you picked. Choose the one you want. Your keyboard will now give you the symbols, letters, etc. that you would get if you'd bought the computer in that country.

  • I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....thank you

    I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
    just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
    thank you

    Hi Moe,
    Sounds mostly likje a bad KB, do you have another to test with?
    Or...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • When im on my apple tv my mac will either start playing music or the volume will go up and down.  Its not on airplay or anything.  Everything work except for this.  thank you please answer ASAP. thanks

    When im on my apple tv my computer will either start playing music, or the voume will go up and down.  Its not on airplay, so i dont know whats wrong... please answer ASAP. Thank you so much!

    The computer is picking up the signal from the remote. Go into system preferences - security - general. Click the padlock and go into advanced. Check disable remote control infrared receiver.

  • I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, how can I get my photos back?

    I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, I am unable to click on the photos. How do I get them back?

    Photoshop Album Starter Edition support withdrawal FAQ
    This will tell you where your photos are.

  • I have a new impulse 61 key board and i have garage band. when i hit a key the sound has a delay before i hear it, i also have it hooked up to a bose radio. is there a way to correct this delay?

    I have a keyboard Impulse 61. I have it hooked up to the imac and then to a bose speaker thru bluetooth and i have a long sound delay from when i hit a key until i hear sound. Is ther a fix for this delay?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • When I hit reply on the .Mac Mail site, an incorrect address is generatedW

    When I'm using the mail program on the Internet .mac site, and hit reply to respond to a letter I received, inevitably the automatic address generated by the program won't function. The reply button puts the person's name and then e-mail address in brackets on the address line. When I hit the command to send, I receive a message that the address is not a valid e-mail address. Then I have to go back and erase the name and remove the brackets-then I am able to send the e-mail. Is everyone having this problem with mail on the .Mac site? I mean I am not typing in the e-mail address incorrectly. The program generates the return e-mail address when I hit reply and it is always incorrect because it puts the person's name as part of the e-mail. Am I doing something wrong?
    Thanks
    Jim Lindsey

    Hi,
    This happens to me when the person's name you are
    replying to contains a comma and webmail tries to
    send it to two people.
    eg if a mail comes from SURNAME, FORENAME
    <[email protected]> then I will get an
    error as the program thinks that SURNAME is an
    invalid address
    but I get an error message every time. It brings up the person's name followed by the email address in brackets. Then when I try to send, I get the message that this is not a valid address. Is this happening with everyone on .Mac site? Surely not or they would fix it.

  • Bookmarks keep getting rearranged every morning when I open Firefox in the morning

    For the last week everyday when I open my browser either on my PC or laptop all my bookmarks are jumbled (no longer in alphabetical or) as when I closed it in the evening. This has just started to happen this week and I have been using Firefox for over eight years with no problem. In some case like today a whole folder of bookmarks was gone. I have not changed any settings or added new apps to either the PC or Laptop.
    Drewski

    You can check for problems with the places.sqlite database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    If you have software like Advanced SystemCare that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

  • My iphone 4 displays connect to itunes on start however when you connect it to the PC it will not start. the apple icon comes on the goes off again. please advice

    the iphone 4 runs iOS 4.3, it did not incur any physical damage. The phone went off and when i connected it to the charger it brought up the cable icon and arrow saying connect to itunes. i tried connecting to the PC however it will not boot. it only only starts to the point of displaying the apple sign and then restarts. this sequence repeats.
    please advice on what to do?

    you can try downloading tiny umbrella and kicking it out of dfu mode... that may or may not work other wise you will have to make a trip to the apple store for replacement

  • I'm trying to download a FREE app on my iphone4s and the billing information thing keeps popping up. It wasn't doing that yesterday. What should I do? Idk why I need that info when the app is free

    I'm trying to download a FREE app and the billing info thing keeps popping up. It wasn't doing that yesterday. Now I can't even download anything. What should I do ? Idk why I need thus info when the app is free

    You must have a payment method in your iTunes account, even for free content. It is used to verify your identity. See: http://support.apple.com/kb/HT2534 for information on how to create a billing method if you don't have a credit card.

  • When I hit Shift + S, the computer talks to me

    I must have accidently hit some wrong key, but now when I try to type a capital S (shift + s) the computer speaks whatever is highlighted. How can I change it back to simply printing a capital S?
    (now, I can only print a capital 's' by pressing 'capital lock', then the 's' key. I need a clue here!

    Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
    (46274)

Maybe you are looking for

  • SOAP Receiver with HTTPS(without certificate)

    Hi experts Receiver system not using any certificate.  Without certificate How PI can send message through HTTPS using SOAP. How to choose HTTPS transport protocol. (Here Target Url have Https://.....) Here I am using PI7.1 EHP1. I configured Receive

  • How do I purchase photos from multiple events?

    I want to purchase about 10 photos from multiple events. I can't seem to figure out how to make that happen so I am not spending 2.99 shipping for 2-3 photos from each event. How do you cluster them all for one shipping fee? Thanks Rojos

  • Invalid table name error ....

    Hi, I have written a function which takes table name dynamically and if column emp_id is null for more than 0 records then 1 is returned else 0 . My problem is when i compile iam getting invalid table name error . Below is my function : create or rep

  • Installation completed though some option components failed to install correctly

    When I went to Install Premiere Pro from the Creative cloud I got a message saying "Installation failed Installation completed though some optional components failed to install correctly. (6)" There's a "More information" button that linked me to thi

  • I lost my serial number

    I lost my serial number for my adobe photoshop elements 11. Don't have the box, reciept etc. All I go twith me is the cd. My desktop broke and I want to install the cd to my new laptop. Pls help