When I imported my mp4 video to imovies, it only shows the 1st frame of the video and not the rest...
When I imported an mp4 video to imovies, it only imported the 1st frame of the video - all thumbnails only showed the 1st frame.
It sounds like you have hidden the menu bar, for details of how to restore it see the [[menu bar is missing]] article. This article may also help - [[Back and forward or other toolbar items are missing]]
Similar Messages
-
when I drag a picture into my imovie it creates a thumbnail but when it plays over it, it shows the picture in front of it and not the picture...and when I go to crop adjustments it shows a black screen. How do I fix this?
I had a similar problem, and i found that the photo was of very low resoluton. As a test I resized the image to a lrager resolution using photoshop CS4 and re saved it as JPG. I imported the new saved image and it seem to have fixed the problem.
-
Project in Imovie 9 Only plays back still frames, wont play video
Project in Imovie 9 Only plays back still frames
I can see all the video clips but screen just goes black while going over the video. The video is still in the computer and has not been moved around.
Also if i play the imported video on the "Event" board it plays over it with no information coming back to the computer. Like if the files were offline.
any help?
Message was edited by: Manny Figueroa
Message was edited by: Manny FigueroaHi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
Macintosh HD)/Users/"Your account"/Library/Preferences
and is named.
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
and find com.apple.iApps.plist - trash this too
While iMovie is NOT RUNNING - move this file/s out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Turn off Mac and disconnect Mains/Power for 20-30 minutes - will at least re-set FW-port
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
• Problems in iPhoto Library can affect iMovie to crash on start-up. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• iMovie updated ?
• QuickTime updated ?
• Mac OS version ?
• Program miss-match. iMovie 4 - will not work under Leopard
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’08 v. 7.1.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’09 v. 8.0.6, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (will work under Leopard and Snow-Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W -
Why is it that when I go to the search screen and type in a particular message I want to view, my iPhone finds it but when I click on it it only takes me to the conversation at the most recently thing texted and not the particular message I clicked on?
Never occurred to me you can search messages that way, thanks.
Another way to do it is to scroll from the most recent message to the top of the screen and tap load more messages, repeatedly till you reach the one you want.
I like your method better, but with both methods it refreshes to the most recent message. -
How can I delter photos in a folder from my Iphone 4s? When I synced the new phone from the Itunes, the photos went to two folders and not the camera roll.
thanks, should I delete all the phones on Itunes and re sync the old phone, then resync the new phone to get the pictures? Will they go to camera roll instead of a folder?
-
When i imported photos from my iphone to iphoto they show as a box with a dotted outline
I uploaded photos from my iphone to iphoto. The event boxes say no photos. But in last import, they are all there as white line outlined boxes. I can see them when I scroll but not when I stop. If I click on one I get a triangle with an exclamation point.
That's an indication that iPhoto has broken the link/file path to the original file. make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh
for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer. -
My mac book pro, deleted mi imovie, when a buy my macbook pro my imovie was in my apps, why i have tu buy and pay for that app now? i'm want my imovie back!
please!!! I HELP ME!I DONT UNDERSTAND why pay for imovie, because i;m pay for that when i buy the macbook pro..
-
I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.
-
Imported DNGs generated in ACR for Windows only show thumbnails
Hi,
Today I imported DNGs from pictures I've created with my 350D through the last year or so. Some of these work completely fine, but others won't show the full-resolution image; they only show a small 256 x 171 thumbnail version.
There is a pattern to whether it's working correctly or not: the DNGs that display correctly were converted on my old iBook - in other words using Adobe Camera Raw for Mac - and the ones that don't work were the pictures I processed on my Windows PC, thus using the Windows version of ACR.
Another thing I've noticed is that apparently the changes made to the pictures in ACR are not recognized by Aperture - is this to be expected?
Does anyone have any idea what I could do to make my pictures work as they should? Thanks in advance.UPDATE
My solution works but I would suggest a few things to avoid a problem I encountered (see THE PROBLEM below):
- Copy your Aperture Library File to the desktop (after backing it up to your vault), then reload Aperture. Your Library should now be empty.
- Then import your DNGs in batches to this new library
- As each import batch is successful, export the project to a file on the Desktop.
- When they have all been successful, copy your original Aperture Library file back to its original location (after deleting the new one you created)
- Then import the projects you saved to the Desktop one by one
The above steps mean that you don't have to go through the process of restoring your library (and all the thumbnails) should Aperture spit the dummy and crash during a DNG import. If it does, you won't be able to fix it without restoring the library... A pain in the A
THE PROBLEM
I was having a problem with a handful of DNGs which seemed to cause Aperture to crash and exit. I couldn't work out what was going on but now I think I have an answer.
The problem seemed to be with DNGs created with the newer versions of the Windows DNG Converter. Converting them with the latest Mac DNG Converter (v3.4) did not resolve the issue.
So, I downloaded the Mac DNG converter v3.1 and converted the existing troublesome DNGs v3.1.... and it works. I can now import even the troublesome DNGs into Aperture now without a hitch.
There seems to be no way of telling which DNG converter version was used to create an individual DNG although I found that it was related to all DNGs after a certain date (ie. the date I started using the newer DNG converter!)
I hope this of help to everyone and that it has answered the question.
Cheers,
Paul Martin
www.paulnika.com -
I have edit set in iphoto to use in photoshop element 9.
When i save the edited photo in photoshop it returns to iphoto as the original and not the edited version.Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu.
OT -
How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5
To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
Thank you!Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks. -
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames. -
When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?
Hi Angela1313,
I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
iTunes Gift balances
http://support.apple.com/kb/ht5035
Learn more
Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
Thanks for using the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
Unable to select an image with right click of the mouse
When in Library mode using grid view, right clicking on a thumbnail does not select the thumbnail, and previously selected items remain selected. If you then try to delete the item, you can inadvertently delete multiple items that you did not intend
-
Looking data from more than one table and inserting into another.
Hello, I am giving you the Table structures as per my requirement.. CREATE TABLE TEMP_A (NAME VARCHAR2(100) primary key); CREATE TABLE TEMP_B (STRUCTURE VARCHAR2(10)); CREATE TABLE TEMP_C ( NAME VARCHAR2(100), STRUCTURE VARCHAR2(10), VALUE VARCHAR2(1
-
ITunes restore error message after iphone upgrade to OS5
Since installing iphone OS5 I've been getting a message when connecting to itunes that my restore was interrupted and would I like to continue to restore from my last backup. I've tried restoring several times and I keep getting the same error messag
-
I accidentally burned music under a data CD instead of Audio CD. How can I erase the data and use the disc for music?
-
Hi. I need to add rows of data in flash and have them total up on the last row as the items are checked. Looking at the following example, if someone checks a tickbox next to items 01 and 02, the total sum would appear on the last row for each column