When i'm in email, after about 10 seconds, i get a black screen.....10 seconds later, it returns me to the general screen....anyone have this before???  thx

when i'm in email, after about 10 seconds, i get a black screen.....10 seconds later, it returns me to the general screen....anyone have this before???  thx

I don't know if you've got this solved or not but I started getting this too about a month ago. I just had it happen again about 10 minutes ago. I was on a website & BAM black screen, I don't hear the usual "winding down" of the hard drive though, so the HD sounds as though it's still working properly AND there's a weird hue around the edges of the screen so it's not pitch black as though the monitor turned off. Once I force shut down then I get the true pitch black screen before it turns back on again.
Also, every time this happens & I re-start the hard drive tends to be working very hard doing something in the background for at least 2-5 minutes not sure why?

Similar Messages

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    /var/audit/current
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    exit
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • When I am listenign to songs off iphone, I hear the music but not the vocals does anyone have this problem and do you know how I can fix this

    When i am listening to music from iphone, teh sound is greater than the vocals.  Does anyone else have this problem and if you do, how do I fix it, it's somewhere in the setting i believe

    Plug the headphones all the way in.

  • When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

    When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
    == This happened ==
    Every time Firefox opened

    try
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • TS3276 My iPad autmatically deletes all incoming emails after about four hours. They are not in the trash. Help, please!

    My iPad automatically deletes emails after about four hours. They aren't in the trash. Help please!

    See picture:
    http://i1224.photobucket.com/albums/ee374/Diavonex/7a47f8614ce19eb760a2fcbae7f6f 749_zps1900a350.jpg

  • I want to write a script or Automator workflow/app that emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have experience?

    I want to write a script or Automator workflow/app that automatically emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have similar experience and know that this would work?

    I have had a first stab at the script, below.  It uses a file to store the shortcuts and command [descriptions].  You should be able to see from the script annotations how to add a new one.  (I populated 1-4 with real data, but got lazy after that, so you have a few placeholders to work with first.
    As I have noted, once you are happy that you have all the data in the file, you can comment out part of the script for ongoing use.  (BTW, my reluctance to use Excel is that I don't currently have it installed and I don't want to offer wrong advice.  If you have Numbers, I do have that and could probably modify to work with a spreadsheet from there.  This might be especially useful if you have the data already sitting in Excel.)
    A few things came-up whilist I was writing the script:
    1.     Currently, all recipients will not only get the same tip at the same time, but they will see the names and email addresses of the others who receive them.  It is possible to modify this.
    2.     I have added a property gRandomCheck which keeps track of which shortcut has already been used (since the last time the script was compiled.  This will prevent the same tip being sent more than once.    When all tips have been sent once, the script will alert you and not send anything until reset.  It does not check on a per-addressee basis (which would be a refinement).  (If you add a new addressee at this stage, the whole process will start again, and you may not really want this to be the behaviour.)
    3.     The way that I have built the list, commandList, is deliberately cumbersome - it's for the sake of clarity.  If you prefer, you can construct the whole list as {{shortcut:"X", command:"X"}, {shortcut:"Y", command:"Y"}}
    Have a look - I am sure you will have questions!
    SCRIPT STARTS HERE  Paste the following lines (thru the end) into a new AppleScript Editor document and press RUN
    --The property gRandomCheck persists between runs and is used to stop sending the same hint twice.
    property gRandomCheck : {}
    --I am defining a file on the desktop.  It doesn't have to be in this location
    set theFolder to path to desktop
    set commandFile to (theFolder as text) & "CommandFile.csv"
    --(* Unless you need to change the file contents you do not need to write to it each time.  Remove the "--" on this line and before the asterisk about 18 lines below
    --Follow this format and enter as many records as you like on a new line - each with a unique name
    set record1 to {shortcut:"Z", command:"Undo"}
    set record2 to {shortcut:"R", command:"Record"}
    set record3 to {shortcut:"⇧R", command:"Record Toggle"}
    set record4 to {shortcut:"⌘.", command:"Discard Recording & Return to Last Play Position"}
    set record5 to {shortcut:"X", command:"x"}
    set record6 to {shortcut:"X", command:"x"}
    set record7 to {shortcut:"X", command:"x"}
    set record8 to {shortcut:"X", command:"x"}
    set record9 to {shortcut:"X", command:"x"}
    set record10 to {shortcut:"X", command:"x"}
    set record11 to {shortcut:"X", command:"x"}
    set record12 to {shortcut:"X", command:"x"}
    set record13 to {shortcut:"X", command:"x"}
    --Make sure you add the record name before randomCheck:
    set commandList to {record1, record2, record3, record4, record5, record6, record7, record8, record9, record10, record11, record12, record13}
    --This part writes the above records to the file each time.
    set fileRef to open for access commandFile with write permission
    set eof of fileRef to 0
    write commandList to fileRef starting at eof as list
    close access fileRef
    --remove "--" here to stop writing (see above)*)
    --This reads from the file
    set fileRef to open for access commandFile with write permission
    set commandList to read fileRef as list
    close access fileRef
    --Here's where the random record is chosen
    set selected to 0
    if (count of gRandomCheck) is not (count of commandList) then
              repeat
                        set selected to (random number from 1 to (count of commandList))
                        if selected is not in gRandomCheck then
                                  set gRandomCheck to gRandomCheck & selected
                                  exit repeat
                        end if
              end repeat
    else
              display dialog "You have sent all shortcuts to all recipients once.  Recompile to reset"
              return
    end if
    --This is setting-up the format of the mail contents
    set messageText to ("Shortcut: " & shortcut of record selected of commandList & return & "Command: " & command of record selected of commandList)
    tell application "Mail"
      --When you're ready to use, you probably will not want Mail popping to the front, so add "--" before activate
      activate
      --You can change the subject of the message here.  You can also set visible:true to visible:false when you are happy all is working OK
              set theMessage to (make new outgoing message with properties {visible:true, subject:"Today's Logic Pro Shortcut", content:messageText})
              tell theMessage
      --You can add new recipients here.  Just add a new line.  Modify the names and addresses here to real ones
                        make new to recipient with properties {name:"Fred Smith", address:"[email protected]"}
                        make new to recipient with properties {name:"John Smith", address:"[email protected]"}
      --When you are ready to start sending, remove the dashes before "send" below
      --send
              end tell
    end tell

  • My MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before

    MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before?  I've only had this for about 3mos.  I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.

    Hi S,
    Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964?

  • When trying to move email messages to trash I get a pull down box that says 'The operation couldn't be completed. File exists'

    when trying to move email messages to trash I get a pull down box that says 'The operation couldn’t be completed. File exists'.
    so I'm not able to move read messages to trash folder

    Back up all data. Rebuild the named mailbox. Try to delete the message again.

  • When I try to email photos from iPhoto I get this message: The email server didn't recognize your username/password combination. It won't let me change it, what do I do?

    When I try to email photos from iPhoto I get this message: The email server didn’t recognize your username/password combination. It won't let me change it, what do I do?

    Can you send email ok via the Apple Mail application?
    The username and password are set in the Accounts section of the Mail application. Start Mail, select preferences and select Accounts. Then make absolutely sure that the username, password and outgoing mail server are entered correctly.

  • Call taking forever to load when I answer, anyone have this problem?

    When I receive a phone call, I push the green button to accept the call and normally it would go into the active call screen which shows the buttons: mute, keypad, speaker etc. but lately it takes forever to switch to that screen. It'll stay on the caller id screen for like 10 sec. and finally switch to the active call screen, anyone have this issue? How do I fix?
    Thanks

    to be honest these are the solutions that may or may not work..
    first thing I would try is rebooting the phone by holding the sleep/wake button and home button for 15 seconds until you see the white apple logo
    if that doesn't work I would restore from backup and if that doesn't work I would restore as new if all else fails take it to your closest apple store they may replace the phone for a working one..

  • When i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

    when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

    My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
    Thanks

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • My Iphone 5 got stuck when I did rest all Settings in my iphone 5 and my iphone do not restart or shut down. The phone do not have the ability to shut down.

    my Iphone 5 got stuck when I did rest all Settings in my iphone 5 and my iphone do not restart or shut down. The phone do not have the ability to shut down.

    Did you try to press and hold the home and sleep button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting the device.
    If this does not work, try connecting in recovery mode, explained in this article:
    If you can't update or restore your iOS device

  • I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page

    i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

    Contact Apple support for warranty service.

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

Maybe you are looking for