When i open my ipod i see big red x and my ipod does not appear in itunes what can i do???
When i open my ipod i see big red x and my ipod does not appear in itunes what can i do???
iOS: Device not Recognized in iTunes for Windows
Similar Messages
-
my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work
iOS: Device not Recognized in iTunes for Windows
-
When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?
gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items -
Hello ! The screen of my ipod is white and my coputer does not reconize it ! What can I do ?
Hello ! The screen of my ipod is white and my coputer does not reconize it ! What can I do ?
Try the white-screen topic here.
iPod touch: Hardware troubleshooting
If not successful, let the battery fully drain and then after charging for an hour try the applicible part of the article. -
I've plugged my Shuffle into my MacBook Pro and Itunes did not pop up. I opened Itunesmyself, yet the device was not showing and I had no 'device' tab in the top right corner next to 'Itunes store' tab. Therefore how can I update the musci on this shuffle or see what the problem is? Thanks
Hi Swill79,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful for troubleshooting your iPod connection:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy -
Ipod 160g does not appear on itunes but it appears on windows when in disk mode
my ipod 160 g does not appear in itune (disk mode or not) but it appears in windows as IPOD (F:) only when it's in disk mode. I tried reseting it by holding the menu and center button it stop but then it goes back to the apple logo screen and stay on untill the battery dies and nothing else happens how can I reset it to is factory settings?
When you connect it in Disk Mode, leave it charging the iPod Battery till Full Charge.
In the meantime, 30 minutes or so into the charging, ( I just want the Ipod to have sufficient power for any harddisk Operation)
go to Window Explorer (or My Computer),
Select the Ipod, right click properties, ->tools->error checking->Check Now->fix error
After the error fixing (may take a while but then you still have to wait till the battery charging is complete.)
Disconnect the iPod from the PC.
Antivirus has a tendency to freeze Itunes sync Operation with Ipod Classic, causing a timeout, which corrupt your Ipod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete. - Done above
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your Ipod to the PC
When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! and have a Nice Day! -
My ipod keeps showing a big red X and tells me to go to this site what do i do ????
See here:
iPod Displays a Red "X" Icon
B-rock -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?
Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer. -
When I import my photos from my iPhone 4S into iPhoto the location does not appear. I have to open the info button on the photo click "photo place" then "find on map" and then the location appears. How to I get the location to appear automatically when I import my photos from my iPhone?
in your iPhoto preferences is look up location set to "automaticaly"?
LN -
My ipod touch 4g does not appear in itunes when connected
My ipod touch 4g does not appear in itunes when connected
See the suggestions in this article.
http://support.apple.com/kb/TS1538
B-rock -
Added or ediited texts by Bluebeam Revu,and has been saved,when I open it by the Adobe reader version 8.1,why it does not show my texts added by Revu?8.1 is my favorite version,I also tried it in a later version fo Reader,it doesn't work too!
Bernd Alheit wrote:
Looks like a problem of Bluebeam Revu, not Adobe Reader.
The response above is only a speculative answer to the original question. DSI-Hal, did you try to flatten the text in Bluebeam Revu prior to opening it in Adobe. This has worked for me on several different documents but not sure if we are using the same version of Adobe Reader.
Give it a shot. Good luck. -
i have iPhoto 9.1.1 and i cannot upload becaouse when i open the software is is write : you must download iPhoto 9.1.1 or updated..what can i do?
well,
i tried differnt times to upload my iPhoto 9.1.1 but it's impossible. i did one week ago "upgrade software" but i didn't find update for my iphoto 11. so i surfed to apple.it (i'm italian) and i downloaded 9.2 but when i upgraded iphoto there was a warning : you can do this, before you have to install iphoto 9.1.1! But i just have! so it is weird! so i though to install the 9.1 but it was impossible because asked me the version before...
i don't know what i can do!
thanks in advance! -
My Ipod 160GB when disconnected is showing without any files, but no room available. It appears in my 'Computer' screen as 'Removable Disk (though the icon is a little iPod). It does not show up in iTunes at all (I have the latest version).
When I right-click the icon on the 'Computer' screen it does run incredibly slowly. I was doing this to consider if I should try formatting it (only NTSF and exFAT formats were showing) but I wasn't certain if that would be a good idea.
I have thus far:
Hard Reset iPod
Verified the Apple Mobile Device USB Driver was installed correctly via Device Manager
Checked the device in 'Computer Management' > 'Disk Management - showing as a RAW file with only format option as exFAT or NTSF
Ran iPod in Diagnostic Boot Mode - IO > HardDrive > HDSMARTData* - stats revealed 'Error' (did this twice to confirm error). Reset iPod from here.
After this it actually came up in iTunes but said it needed to be restored - ran Restore iPod. Error message said 'iPod cannot be restored. Uknown error occoured (1415).
Tried Solution 1 (http://support.apple.com/kb/TS1539) - Reregistering the .dll files. Was unable to complete step 11 as the iPod did not appear in iTunes.
Verified that Apple Mobile Device Manager was installed.
Restarted the Apple Mobile Device Service.
Checked for third party conflicts - couldn't find any.
Changed the drive letter and restarted the computer.
Put into disk mode - unsure what that achieves.
Downloaded the HP USB with no luck running the program. I believe that Windows Vista doesn't allow formatting drives to FAT32 at all, and even previous editions of Windows wouldn't allow formatting above 32GB so certainly no suitable for me. If I got hold of a mac computer - could I format on that? Or is there a FAT32 Formatter that works for 160GB?
So I am at a bit of a frustrated loss. If you have any suggestions or know what I should do - I am all ears or eyes as it were. I will be on standby to give you more information if required.
Thanks,
AshleyTry Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Also see these (if you haven't found them already):
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes -
Ipod does not appear in itunes after windows scan and fix
Two days ago, I restored my Ipod classic using Itunes 9.2.0.61. After restoration my Ipod started freezing Itunes and Vista. At a point, I saw a blue screen and my computer forced a shutdown. When it rebooted, Vista kept asking to automatically "scan and fix" problems on my Ipod. Thinking that would solve the "freeze" problem, I stupidly went ahead to have Vista scan and fix my Ipod. Now the freeze problem is gone, but my Ipod does not appear in Itunes. I have tried the five Rs from Apple, but that has not helped. Anyone with a solution?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.
Maybe you are looking for
-
Matlab code for an image in labview
Hello I am having a matlab code which works perfectly in matlab. I would like to put this code in Labview mathscript and run. How is it possiblle? D = imread('Image name'); imagesc(D) imshow(D) [R,xp] = radon(D,[0 45]); figure; plot(xp,R(:,1)); title
-
JSF 2.0 beta2 - JavaScript not execute in ajaxreponse + Parameters: Invali
Hi, I'm testing JSF2.0 beta2. I found the following problems: 1) The JavaScript is not executed in the ajaxresponse. I solved it by adding the following JavaScript code to my xhtml file: function executeScripts(data) { if (dat
-
How to call a procedure inside a trigger?
hi people, I have a trigger which cals a stored proc named PY.but i couldn get dis trigger worked out.can u pls sugges me?.the trigger is as follows. create or replace trigger ts after insert on s for each row begin call py if this trigger gets succe
-
Hellllllllllp i need help installing java runtime environment
hi i'm new to java and have done up an application which i want to install on my friends computer i don't want him to have access to the code the application involves data being stored on an a access data-base i dont want to install the java compiler
-
Location Products Without Change Authorization
Hi, I ran the report /SAPAPO/DELETE_PP_ORDER in a background job and in the spool, I see ; ======= Location Products Without Change Authorization Product - Location XXXXX---- ABC a list of products and locations and at the end "No PP/DS orders