When I open my Pictures File in Bridge I can't see all my folders, even though I can see them in my Finder ?

When I open my Pictures File in Bridge I can't see all my folders, even though I can see them in my Finder ?

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

  • HT1329 I am trying to move music from my ipod onto my mac. When I locate the ipod under devices on my mac there is no music ! even though I can see it and play it when I use the ipod. So how can I transfer it ?

    I am trying to move music from my ipod onto my mac. When I locate the ipod under devices on my mac there is no music ! even though I can see it and play it when I use the ipod. So how can I transfer it ?

    brianmartinwoolf wrote:
    I am trying to move music from my ipod onto my mac. ...
    Was this Music purchased in iTunes... If so... see here...
    Transfer Purchases
    File > Devices > Transfer Purchases
    More Info Here  >  http://support.apple.com/kb/HT1848

  • TS4036 hello there, my old phone was stolen and when trying to set up the new one using icloud it says: No backups available, even though i can see my last backup saved both on the new phone and my ipad, any bright ideas please?

    My old phone was stolen and when trying to set up a new one and restoring my last backup from icloud it says: No backups available, even though i can see my last backup is saved/still there both on the new phone and my ipad, can one only restore from an earlier saved backup during the intitial set up of the phone, or are you also able to restore/pick up an older version later after is i set it up as a new phone?  is any bright ideas please?

    Did you figure this out? I'm having a similar issue.
    Thanks!

  • When I open a picture file (jpeg) the picture goes away.

    When I open a jpeg and crop it, the picture goes away. I can not do any more editing. If I "undo" the crop the picture returns. My wife tried to edit a couple of pictures and ended up losing them totaly. There is not any forum post that I can find that address's this. Of course there is not a phone # to call or chat to start. There is not even an email I can send. Has anyone else found this out.
    Also I cant seem to sign in. When I went to sign in to the forums I was FORCED to change my password. I still can't sign in to my product with either password.
    I have windows 7 Ultimate
    Intel core i7-3770 CPU @ 3.40 GHz
    12 GB ram
    64 bit
    No Pen or Touch input
    HP model #h8-1360t

    Hi ,
    after making crop marks ,
    commit /cancel appears . you should choose one of them to proceed further.

  • I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

    i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

    You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
    Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

  • Good afternoon ladies and gentlemen!   My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

    Good afternoon ladies and gentlemen!
    My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
    Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
    The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • When i open a picture it opens at preview but "all my files" opens everything else with it , same happens with MS word when i open document every word document opens with it

    When i open a picture it opens at preview but "all my files" opens everything else with it , same happens with MS word when i open document every word document opens with it

    Hi MIXAYA,
    Thanks for using Apple Support Communities.  In OS X, by default apps will open with any previously opened documents opening as well.  To disable this feature, select "Close windows when quitting an application" from System Preferences > General.  To learn more, see this article:
    OS X Mavericks: General preferences
    http://support.apple.com/kb/ph13803
    Close windows when quitting an application
    If you quit apps with windows still open on your screen, selecting this checkbox prevents the windows from reopening automatically the next time you start their app.
    Cheers,
    - Ari

  • When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

    When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
    I store my PSD files adjacent to the original RAW file from which it was derived.
    If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
    How can I control which Photoshop will open a file I select when opening it through Bridge?.

    Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
    Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
    But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
    Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
    And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

  • When i open a raw image in bridge, photoshop doesn't recognise the file

    when i open a raw photo in bridge, photoshop doesn't recognise the file

    Details and screen shots, please.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Cs3 stops running when opening a picture file

    HI, Ihave CS3 extended running on Vista.Program ran find for months until yesterday, Whenever I try to open a picture file CS3 stops working and shut down. It doesnt matter what type file. I removed program amd reinstalled, still got same probelem. Any suggestions on how to solve? thanks Craig

    Well, when stuff stops working it means that something happened that made it go haywire so what did you install/configure/do before this happened? have you installed some photoshop plugins? updated some drivers? installed some new software?
    Another (far fetched) possibility would be that your anti-virus program is up to no good after an auto update so try temporarily deactivating it, maybe that will solve it.
    Or if it's as Chris says, a problem with the printer driver, try uninstalling the driver completely, not just disable it or maybe go to Control Panel->Printers, right click on Adobe PDF(or some other "printer" from the list) and select "Set As Default Printer"

  • When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

    When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Safari on my account does not display images when you open a picture.

    I have Snow Leopard 10.6.8 installed. Safari on my account does not display images most of the time when you open a picture like (www.example.com/example/example.jpg or any other format). If the image does not display, I can drag from the corner, it displays the image. However, pdf does not work at all. I have to choose open in Preview to view the pdf file. I can even show the example:
    Sometimes the images work like right now.
    2. This is the time when the images do not work.

    Hi all the real problem was this...
    The issue was that the wee rubber eye piece around the viewfinder had slipped out of its seat slightly and was covering the sensor for the LCD. I Just checked the rubber eye piece bit  pushed right down till it clipped into place and now not obstructing the LCD sensor as the picture displays both with the LCD auto off enabled or disabled !! simple thing but a massive trap !

  • Unable to open *any* picture files in Photoshop CC

    I cannot seem to open any picture files in Photoshop CC. It doesn't seem to matter what file type it is.
    .jpg .gif .png  no file will open.  They open just fine in Illustrator but Photoshop can't seem to find them.
    I've tried modifying what program "opens" the file but Photoshop isn't listed. Window Media Player is listed, as
    is Illustrator but I have to search for Photoshop and when I click on it, it doesn't do anything.
    Please help.

    Allyson,
    Another welcome here.
    Along with the answers to Trevor's questions, how are you attempting to Open those Image files, i.e. Dbl-clicking on them in Windows Explorer, or from the File>Open menu in the Toolbar? If you are using the former, please try the latter. If you want to work from Windows Explorer, Rt-click on the file, and choose Open With, then Photoshop.
    Your comment about WMP being the default viewing program, seems to indicate that your File Associations have been changed, with WMP now set as the target program. If this is the case, then you will likely want to go to Folder Options (check for your specific version of Windows), and reset the File Associations for, say PSD, PSB, JPEG, etc., to point to Ps.
    Good luck,
    Hunt

  • When i open a picture from photos, i get an error message

    Hi please can any one help me , this problem has only just started when i open a picture from photos it disappears and i get a black screen with a clear circle and a ! in the middle , it happens on all of my pictures , please can any one help , thanks

    Welcome to the Apple Discussions.
    The only thing i have done was empty my all image folder in finder under the search for triangle
    By empty do you mean move to trash? Messing with the contents of the iPhoto LIbrary package using the Finder is tantamount to committing the cardinal sin of iPhoto.
    Open the iPhoto Library package like this. and look inside the Originals folder and its subfolders to see if the full sized image files are still there. If so you'll be able to create a new library as follows:
    Creating a new library while preserving the Events from the original library.
    Move the existing library folder to the desktop.
    Open the library package like this.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
    If there are no full sized files inside the Originals folder and you don't know where they are on the hard drive, i.e. you deleted them via the Finder, you'll need to use a file recovery program like SubrosaSoft FileSalvage to recover those image files.
    Please expand on exactly what you did using the search.

  • When I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    when I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

Maybe you are looking for

  • Error while deploying web role - Invalid application runtime - a runtime component is missing:/base/x64/IISConfigurator.exe

    I have Azure SDK 2.5 installed and when I try and publish my web role from VS 2013, it fails. When I manually upload the package and config through the Azure Portal I get the error:  "Invalid application runtime - a runtime component is missing:/base

  • Problem with the order of colums in query

    Hi! We work with SAP 2007 and patch 44. When we want to do a query, in the result, the colums aren't in same order that I have defined in the query. Someone have already met the same problem? Thank you to take in consideration my problem Best regards

  • Usage of JMSSTORE & JMSSTATE columns

    Hi,           I'm searching to find the usage of the following columns in the JMSSTORE and JMSSTATE tables.           JMSSTORE-> column: RECORDSTATE           JMSSTATE -> columns: RECORDSTATE, RECORDGENERATION           Thanks.

  • BW Business Content Error

    Hi Gurus, Hi Saravanan and new to this forum May you ll able to help me out on the following error, I were trying to install a few infocubes from the business contents At the process of Install->Simulate , i'm getting the error the Version D of the o

  • Weblogic redirects to administration port, not ssl port, for confidential

    Using WLS 9.2 MP2. I added the following into web.xml to make sure all requests are using https. It works fine when the administration port is not enabled (weblogic redirects the request to the ssl port). But when the administration port is enabled,