When I plug my iPhone 5 into my Macbook air it just repeatedly flashes the trust question whilst vibrating and will not connect. My iPad connect to the macbook fine tho. Any ideas on how to fix this?
I want to connect my iPhone to my macbook to backup all my photos but it just vibrates constantly and flashes the trust computer question over and over.
Any help would be great.
Talked to AppleCare and it's most likely the fact that my MacBook has 3.0 USB ports and my non official charging cable can't support that. So yeah, I'll try a new cable, hopefully that's the fix.
Similar Messages
-
My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this problem?
On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer -
I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.
By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ -
When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?
-
Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?
Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
Item 24 lists 3 installable major search engines for Australia.
You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney. -
I am running cs4 suite in Mountain Lion and when I make PDF's, Helvetica Neue regular and bold both appear as squares. Any ideas on how to fix this??
Firstly you have to be very careful as these fonts are system fonts and are critical to the operating system.
I'm no expert I just followed the advice in this link.
http://indesignsecrets.com/removing-nonessential-system-fonts-in-leopard.php
It worked for me and now the font works in illustrator without converting to paths before creating pdfs.
Hope this helps... -
When I hold command R to restore at start up, my laptop just start normally instead of showing me options. Any ideas on how to fix this ?
Prepare Your Mac for Sale
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box. -
My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards languages the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?
The keyboard doesn't normally play any role in Apple apps regarding spellcheck. That is determined by system prefs/keyboard/text/spelling. Go the setup item at the bottom of the list and make sure that British English and Spanish are the only two boxes checked, and then set it to Automatic. How well it works varies a lot. You may also need to check Edit > Spelling and Grammar > Show Spelling and Grammar.
If you are still using Pages 4, spellcheck is determined by Inspector > Text > More > Language. Make sure that is set to the right thing for what you want to do. -
when trying to enter my wifi password the ipod won't let me enter upper case letters. do you have any ideas on how to fix this ?
Try holding the Capslock key with the letter you want to be capitalized. It should work.
-
I have an i phone 4s I have tried everything i know to do, but cant get the phone to ring out loud when i recieve a call or message. Any ideas on how to fix this?
Flip the ring/silent switch on the left side of the phone from silent (red showing) to ring position.
-
My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?
My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?
http://support.apple.com/kb/ts1538
-
I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables. There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?
Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad. -
I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?
Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom -
AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?
If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.
Maybe you are looking for
-
Opening pdf attachments in Entourage
How can I set the opening of pdf file attachments in Entourage to Acrobat instead of Preview?
-
I want ti implement the following
Hi everybody, I have to implement the following idea and I dont know how. Any help will be apprciated. The idea is to scan an array for zeros, one a sequence of zeros is found then find its center and save in another array ? The folloaing image illus
-
Is it possible to edit/change audio files in a published html5 file?
Is it possible to edit/change audio files in a published html5 file?
-
Price Control Indicator in Material Master Record (Accounting View1)
Hi, Is there any way to make the Standard Price (S) or Moving Average Price (V) automatically SET in Material Master Record? So that everytime we create a material, there will be no need to enter which price we prefer.
-
Does anyone know what the Trigger function do?
Hi all, I recently have to build a device driver for positioning controller. Can someone tell me under what circumstances the function Trigger under GPIB 488.2 becomes useful? What to expect after this function is executed? Help doesn't explain much