When i recieve an email it will not stay on the phone., when i recieve an email it will not stay on the phone.

When I receive an email on my phone it disappears after awhile. How do I make it stay on my phone until I edit my list?

goto settings>mail,contact,calenders under your individual mail accounts, increase the "mail days to sync" or set to no Limit

Similar Messages

  • Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

    Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

    No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

  • For the last 4 months I can not send any mail from my mac mail account. It will receive but not send. I have to use my Yahoo or Gmail account to send anything. When I forward or try to send a new email, a box wants my password. IT won't take my password.

    A box comes up after I try and send an email wanting my password. I put the password in, the box disappers, then shows up again empty wanting my password. The same password is used to access Apple but Mac Mail will not accept it. It just stop sending about four months ago.

    It is possible that you are in a transition period of time when Apple is shutting down the mobileME website.  In fact, Mobileme.com is closed at this moment.  I can see where you might be receiving email traffic and yet being unable to send email out using the mobileme/ mac dot com emaill address.  Check this article out from Gigaom.
    http://gigaom.com/2012/06/22/final-notice-make-the-move-from-mobileme-to-icloud/
    Hope this helps

  • Why will Adobe not accept my Verification Code when trying to email pictures?

    Why will Adobe not accept my Verification Code when trying to email pictures as it is the code they sent me?
    Message was edited by: MrsChar

    Hi,
    It might help if you could tell us your version of PSE and your operating system.
    In between requesting the verification code and trying to apply it, you didn't change any of the settings in Edit -> Preferences -> Sharing did you?
    Did you use Copy & Paste to copy the verification code from the email to PSE?
    On the page that is asking for the code, you can always click on the resend button and it will send you the code again - worth a try.
    Brian

  • After updating to Firefox 3.6.9, when I click on a link in Outlook email, I get a message which says "General failure. The URL was: .... An error occurred in sending the command to the applicatio." and the link will not open. How can I fix this?

    I updated Firefox yesterday to 3.6.9. When I receive a URL link in an email within Outlook, I cannot open the link in Firefox. As I said in the question, when I click on the link, a Microsoft Office Outlook error message appears which states that a General failure has occurred in sending the command to the application (which is Firefox). I am using Office 2007 This did not occur prior to the upgrade of Firefox.

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • Hi, I have deleted my old apple ID as it was my old email address and replaced it with a new one but cant seem to make my Iphone and Ipad forget the old one and Icloud will not let me in. also when I try my old password or try and reset it it will not let

    I deleted/changed my old apple ID (from the apple webb site) and I have changed all my Apple products onto the new ID, but they all randomly ask for a password for the old ID (which now will not work and I can't change) the biggest problem is that my icloud account will not let me in to do anything.
    my knowledge of Apple is limited.

    We need to be clear here. Did you create a second ID, or just modify the single ID?

  • All of a sudden this morning my iphone will not send imessages from my phone number but only from my email address. When I go to the settings for my imessages to choose where they are coming from my phone number is greyed out....Is there a way to fix this

    All of a sudden this morning my iphone will not send imessages from my phone....

    Hi Chas869,
    Hmm, that is strange that your phone number is greyed out. There are a few things that we can try. First would be to turn iMessages off, then back on. See if you are able to select your phone number. Then if that doesn't work, turn iMessages back off, then reset the network settings....settings>general>reset>reset network settings, this will reboot the phone. Don't worry, it won't delete anything from the phone, it simulates a battery pull. Once the device comes back on, then turn iMessages back on. Keep us posted if that works!
    ErinW_VZW
    Follow us on Twitter @VZWSupport

  • Contact names not appearing in texts or when calls recieved

    I got off a plane from the UK to the US (this was a return trip, i'm from the US on Verizon) and when I turned my iPhone 4S back on, all of the contact names (who are in my Contacts) disppeared from emails, texts and my phone log.  A friend told me to "Import SIM Contacts" but that didn't do anything.  I deleted all of my texts hoping that when I sent new texts and recieved calls names would appear, however they still are not.  Is there anything I can do other than take it to the Genius Bar?

    I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week. 
    After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
    Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part.  I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow.. 
    I have other issues with my phone, but at least this one seems cleared up for now.

  • When I send a webpage via email, some of my recipients are unable to see it properly. The website was made with iWeb, and a Mac person advised me this was the best way to do an email campaign with iWeb, but it's not working for a lot of my customers - why

    I have recently created a website for my family's business. When we bought the Macbook the guy in Apple said the best way to send an email campaign to our mailing list was to publish a hidden page, find it in the browser on Safari, then share it via email, so that is what I do. For most of my customers this works fine, however I have a number of people each month who cannot see any of the content of the email. I have added an 'If you can't see this email properly...' link at the top of the page, with no shapes or images etc near it, but even that does not appear for them.
    I am a self-taught novice unfortunately, so haven't a clue what the problem is. I'm not sure of the operating system, but we bought the Macbook in May and it has all the recent updates installed. I have just had a new baby so can't get into the store fdor a one-to-one, so if anyone could explain why this happens / what I can do about it, I would be very grateful! Thanks!

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Zzxc: When I click on a link in my email it doesn't go to the page. It is a blank page. It will work in internet explorer. When I sign in at certain sites, it doesn't redirect. Why is that?

    <blockquote>Locked by Moderator.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?locale=en-US&comments_parentId=688606&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    zzxc: When I click on a link in my email it doesn't go to the page. It is a blank page. It will work in internet explorer. When I sign in at certain sites, it doesn't redirect. Why is that?
    I am still having the same problem. I did what you said to do, but it didn't help. I cleared all of firefox's cache and still doesn't work.
    == Firefox version
    ==
    most recent
    == Operating system
    ==
    Windows 7
    == Plugins installed
    ==
    just windows,itunes, flash

    I have not found a way for the email hypertext to go to the FaceBook App, but I no longer click on the hypertext as I know whatever information or posting it is directing me to in FaceBook will show up when I open my FaceBook App.  I also have noticed that many pop-ups on the Browser don't actually know if you already have the software they are promoting. 

  • My safari will not open after downloading librooksbas.dylib plug in. message that is displayed when i try and open is "safari quit unexpectedly while using the  librooksbas.dylib plug in" i can either re-open or ok the error to which neither work :(

    i have tried the terminal code thing where you enter certain words then press enter and it worked but as soon as i restarted it and opened safri the error message apperarewd again my software is OS X 10.9.1

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/\(.*: \)\(.*\)/ \(\2\)/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • HT5621 My ipad recognizes and old email address for icloud.  When I go to change the address it sends me an email verification email that says click the link THAT DOES NOT EXIST IN THE EMAIL!!   How do I get this changed?

    I cannot get my icloud email address changed, but I no longer have that email address.  So it is sending an email to an address that no longer exists, yet I cannot get it to change to my current email address.  WHen I walk through the process, it sends me an "verificaiton email" that DOES NOT have the link in it to verify.  UGH

    Welcome to the Apple community TMOZINGO.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • HT5312 How can I add a rescue email? I forget my security questions and need to add another email to reset them. I did not add a rescue email  when I originally signed up.

    I do not recall ever answering the security questions therefore I do not know them and iTunes will not let me purchase music through my iPhone. How do I reset the security questions? I do not have a rescue email set up to do so. How can I add that?

    You can't now and need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    The time to create a rescue email address is when you set up the security questions, not after forgetting their answers.
    (90478)

  • HT204053 I have an old apple id that is no longer valid coming up on my iphone and is now now allowing me access to emails because i do not have a valid password. when i click to reset the password and ask for an email - the email never arrives to any of

    i have an old apple id coming up on my iphone. i do not have a valid password and every attempt to reset it either by email or by questions does not work. When i select email to reset i do not receive an email in any of my mail boxes. when i select ask questions - my answers do not match
    please help

    If you're talking about an old iCloud ID, you have to delete the old account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT5622 I have just received a new iphone 5s and need to set the Apple ID with my work email.  I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use my work email as the Apple ID on my new iphone. What do I do

    I have just received a new iphone 5s and need to set the Apple ID with my work email.  I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone.  As it is a work phone I need to use this email address as my Apple ID.  How do I do this?

    when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

  • I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file the email message will crash.

    I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file it fails and about 50% of the time when I want to send a standard text massage it will also fail and the email massage crashes. The only way I can get my Outlook to work is if I switch to Firefox web browser. I would rather not switch to a new web browser if I don't have to.
    It seems like what ever the problem is that its related the Safari web browser, because it works fine on the Firefox web browser.
    I think its some kind of plug-in failure because it giving me a LOC ERROR:
    LOC ERROR: Unable to locate localized string for resource ID 5007.
    How can I fix this Plug-in?
    And, yes my softwer is conpletly updated…

    That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.

Maybe you are looking for