When I resume my laptop from sleep/hiberante, firefox is hung. It will prompt me with a dialog when I quit, so it is still running, but the page display is blank and will not refresh. I noticed this since about beta 7

Firefox is running when my laptop comes out of system standby, but the page that was displaying when the laptop went into sleep mode is now a white canvas that does not refresh.
The application is not hung, because I get prompted to save tabs when I quit, but for some reason, I can't prompt Firefox into refreshing the screen.
I'm running Firefox on a Thinkpad T400 which has Intel 4 series Express integrated Graphics.

This also happened if the network adapter is disabled then enabled. My computer is Windows 7 x64. Firefox needs to be killed from taskman before it will load a new instance of the application. I can also reproduce with all add-ons disabled.

Similar Messages

  • Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Hello QuinnDev,
    Thank you for posting in the Apple Support Communities.  It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on.  I found an article that talks about closed clamshell mode.  You would have to fulfill the following requirements to use your display this way:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    You can find all the steps and the full article here:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/HT3131
    I hope this helps!
    All the best,
    Sheila M.

  • Hi, I am trying to download IOS7 to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it.  How can I clear this screen and finish the download. Thanks

    Hi, I am trying to download IOS7 (not sure if it's 1 or 2) to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it.  How can I clear this screen and finish the download. Thanks

    Hello Den53,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430?viewlocale=en_US
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
    Best of luck,
    Mario

  • My Firefox browser will open just fine, but the page is completely blank when it pulls up. Please help!

    My laptop got infected with some kind of a trojan. I ran a full scan using my virus protection software, and after quite a bit of work (including a system restore), the infection seems to have been cleaned up and removed.
    The problem I'm having now, is when I open my Firefox web browser page, it pulls up, but the page is completely blank. There is literally nothing in the page, no tabs, no home page, nothing. So, I cannot access the internet right now using Mozilla Firefox. I'm having to send this out via IE, which I do not like to use anymore. I was not having any issues with my Firefox web browser, until my pc got infected. Please help!

    It is best to do a clean reinstall after doing a system restore in case some files got mixed up.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    Also remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls

  • I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • I´m trying to open a presentation created  oct 2013 and asks me to update my KN version, but the latest is already instaled, and is not opening, what can I do?

    I´m trying to open a presentation created  oct 2013 and asks me to update my KN version, but the latest is already instaled, and is not opening, what can I do?

    Put Keynote application in the trash, then install again from the Mac App Store fixes this.

  • I'm trying to register for iTunes, but the page says my phone number is not valid.

    I'm trying to register for iTunes, but the page keeps telling me that my phone number is not valid.  Is there some trick I don't know about?

    Hey,
    The iTunes store has web based support available here: http://www.apple.com/support/itunes/store/
    You can also email the iTunes Store from the links on that page.
    MBP 2.0, 2GB ram Mac OS X (10.4.7)

  • HT204406 iTunes Match is not working on my iPhone 4S after installing iOS 6.  I finally see a list of artists, but the songs are all empty and will not play, and no play lists are present.

    iTunes Match is not working after the iOS 6 install.  All music that was previously downloaded is gone.  When the "Music App" is opened, I see a picture of a cloud, and a progress bar that goes nowhere.  Then it goes away.  No playlists are present.  It shows artists, and albums, but all songs are empty. Nothing plays.
    Is there a fix for this, or are the Apple Servers simply totally overwhelmed, and this is a matter of being annoyed and patient until it finally connects.
    Thanks!

    Same issue for me.
    Some further peculiar things I noticed:
    Directly after updating to iOS 6 I had to switch on iTunes Match again (iPhone settings). Then I realized that my music was gone (as described above).
    Under settings -> usage one could see that the memory space was still occupied by the huge music library (i.e. there where only 9 of 64 GB free). This changed after several hours. Now there are only 9 GB used, the rest is free. So the library is really gone.
    Since then my iPhone continuously downloads some unknown data from the internet (even if all apps are closed and I deselect the use of mobile networks at the several menus in the settings). All apps are closed. The iPhone gets hot and downloads something. It downloaded nearly 400 MB in the last 48 hours via mobile networks. (I got a flatrate, so I don't really care about the data.)
    Does anyone know what this means? Thanks for any help!

  • ICloud update 3.0.1 40 has removed my sync buttons in Outlook 2007. I run it as admin but the add in is "unloaded" and will not install :-(

    I am about to get a nervous break down from this. FINALLY I got my 2 iP5 and my 2 Win7/Outlook 2007 PC's to work and sync together. This latest update did remove that add in and it's impossible to install / load it. Tried as an admin but of course no result. I hate this so much that I am glad I don't meet any of you Microsoft or Apple guys who produce this updates. WHY NOT DO A BETTER JOB?

    I have now got my "buttons" back ("Refresh iCloud" & "Notifications"), but in spite of that my shared calendar does not sync the events I insert in my PC Outlook 2007 to my other 3 devices.
    Events between my 2 iPhones (iP5/OS 7.0.4) work fine, even with my other Win7 PC.
    All was fine until I updated my iCloud a week ago... :-(
    I have now - as an admin in Outlook - under Tools/Trust Center/Add ins activated the iCloud Add-in, so it is not any longer Deactivated (?)
    Under Help / Outlook 2007 - under Disabled Items the add-in is now removed. It was there even after it had been removed from the Trust Centers Disabled Items..
    This is honestly the most stupid way of using nice time (thank god it's raining today and my golf was cancelled.. )

  • I have connected my iPad 2 to an Infocus X1 projector using a 30 pin / VGA connection cord. The iPad displays the slide display mode only and does not permit slide show to be launched?

    I have connected my iPad 2 to an Infocus X1 projector using a 30 pin / VGA connector.  The iPad will not change from slide sorter mode to presentation mode. How do I change the iPad to 'slide show' and get the projector remote to respond to changing slides?

    The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.

  • My Imac 27' screen is shutting off for no reason. The Imac is still running but the screen is black and stay like that. Is there anyone else with the same problem, and does somebody know what is this?

    I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now  I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?

    I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
    1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
    2.- Replace an expensive part of the screen (about $900)
    3.- Try with an external monitor to see if the problem was the screen or something else
    What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
    And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
    So that´s that, I hope someone finds this helpful
    P.S. Sorry if my english it´s not that good

  • HP LaserJet 2605dn display is blank and will no longer print

    I have had this printer for several years and has always worked flawlessly, until just recently. I encountered a severe jam and still had 40+ pages in the buffer that could not easily be recreated, so i decided to leave the computer on while removing the jammed pages (2), and the printer continued and finished printing the job. In order to get to the jammed pages, i had to remove the top portion of the printer. I don't remember if the display went off immediately, or not, but there is NO DISPLAY on the printer now.   Also, soon after this jam, the printer has stopped printing. 
    I am running Vista. I turned the printer off, unplugged it, unplugged the USB, restarted the computer, reconnected everything, and still no display or printing. I deleted the printer and re-added it, but still no.
    Did i mess something up when i removed the top of the printer? 
    Any suggestions? Thanks!
    This question was solved.
    View Solution.

    oh, my! That was so long ago. But, if i recall correctly, when i pulled off the top of the printer, there was a very small wire with a plastic connector on the end that had pulled appart when i removed the top. I probably had to use tweezers in order to reconnect it.  sorry for the foggy details, but that is what resides upstairs these days! good luck.

  • Everytime I try to browse, I will type in an address and it'll go but the page is just blank, like it didn't install all the way. I've tried uninstalling and reinstalling nothing helps what do I do?

    I installed Firefox 6 and everytime I type in a different address it will act like it is loading the picture and then everything is blank. I know the internet is working because I can browse with other browsers.

    When you uninstalled and reinstalled AI did you run the Cleaner tool in between?
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • I'm trying to import contacts to outlook 2011 from a cvs file.  I've followed all the steps, mapped the fields, clicked import -- it shows that it imported my 900 contacts --- but the contact field remains blank and I can't see any information.  Help?

    I'm trying to import contacts to outlook 2011 from a cvs file.  I've followed all the steps, mapped the fields, etc.  It appears to import all 900 contacts, but after finishing nothing appears in my contact list.  Any ideas on why this is not working?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • HT1688 I installed an app for Whatsapp and ever since, when I try to use Safari the page comes up blank and frozen, what do I do? ( on my iPhone 5s)

    The message is the same as above

    Uninstall and reinstall the app.  Restart the phone (press and hold the HOME button and power button until the Apple logo appears).

Maybe you are looking for