When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark
When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark , it's brand new I just receive it from Apple Store .
Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Similar Messages
-
2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.
Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
White screen with flashing file icon with question mark mean
What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.
It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X. -
MacBook Pro flashes file folder with question mark and startup manager will not run
My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Flashing File Icon with Question Mark Upon Start-Up
Today when I went to use my computer (which was already on) it went blank and then came up with a gray screen with a flashing file icon with a question mark in the middle of it. I have already troubleshot things with several forums online and nothing has worked. I have tried to restart in Safe mode, single user mode, verbose mode, and tried to get on using my option key which got me to an internet login screen finally. I tried to log in and eventually got to an apply.com/support screen with -1007f underneath. I am not 100% which operating system I am on. I know that it is Mac OS X and pretty recent. Please respond if you can help!
Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
To boot from DVD:
Press C during startup
Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media). -
White screen, showing a flashing file icon with question mark??
Having issues with the above, please help
Flashing ? mark means it can't find the Disk it thinks it's supposed to boot from, or the Disk is muxed badly.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
Powered up Mac book and screen showing file folder with question mark flashing?
A flashing question mark appears when you start your Mac
Hope that solves your issue. -
27 inch iMac Intel won't boot up. Screen lights up, then shows a flashing file folder w question mark. What can I do to find the problem?
Please readd Apple's trouble shooting steps in Flashing question mark appears when you start your Mac
-
When booting up get flashing apple folder with question mark and no sign, why?
When booting up get flashing apple folder with question mark and no sign, why? Computer will not open up. I have tried resetting the Pram. I can access the hard drive from another computer holding down the t key when starting up the Macbook Pro. What to do next?
The cable connecting the HDD to the logic board may be faulty. If the internal HDD can boot the MBP when in an external enclosure, that will confirm this issue. If not, the HDD may need to be replaced.
Ciao. -
i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?
Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD. -
MacBook won't start - shows flashing folder icon with question mark
When I attempted a Spotlight search, my MacBook froze. I shut it down, and when I start again I get the sound, the blue screen, and then a flashing folder icon with a question mark. I tried starting with Option pressed down; didn't work, and now I don't even get the flashing folder icon, just the blue screen. Any suggestions?
The flashing folder with question mark means the computer can't find a working OS on the computer. This may mean your hard drive has failed.
Try holding the Shift key while starting up the machine. This puts the machine into Safe Mode.
If you have your install discs, insert Install Disc 1 and start up the computer while holding down the C key. When the Installer has loaded, choose a language. From the Utilities menu, choose *Disk Utility*. Does your hard drive show up here? If so, click on its icon (the one with manufacturer name & capacity, NOT "Macintosh HD"), and then click on the *Repair Disk* button.
If booting in Safe mode doesn't help or you don't have your install discs, you need to bring the computer to an Apple store and have the folks there look. If Disk Utility doesn't list your hard drive, it has very likely failed and will need to be replaced. If your machine is out of warranty, you're better off replacing it yourself, as it's very easy to do.
~Lyssa -
My late 2006 Black MacBook has a gray screen and won't boot.
My late 2006 Black MacBook has a gray screen, folder icon, and flashing question mark. I replaced the HD with a Western Digital 500 GB and had no change. What's wrong with my MacBook?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive Operating System data is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
Once it has finished booting and you Choose Your Language and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
When I start up Iget the white screen and then it goes black and does not respond.
My iMac appearso have crashed. When I start up i get white screen,but there is no strt up box. It the goes dark with blac screen. It does not respond afterwards. I have some important information on the hard drive and I don't have backup.
Hey Sarves!
I have an article for you that may help you resolve this issue:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
While the article is written for a gray screen appearing, the troubleshooting steps may still help you resolve this issue. Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
Flashing file icon w/ question mark at start up
My MacBook had been working fine on Tiger since I bought it last august, and a few months ago I installed Leopard, which also worked great except for safari freezing up every once in a while. But today when I tried to start it up and the blue screen appeared, it stayed like that for about ten seconds, and then a flashing file icon with a question mark appeared. I have no idea what it means, I can't make it startup. I've turned it on and off a few times, hoping for the best, but nothing. This computer is not even a year old, any help?
Thanks in advance.Welcome to the Apple boards:
Your first hint that something was wrong was when Safari started freezing.
You may have a bad HD or at least one that is going bad.
Boot into the Leopard DVD and in the menu select Utilities and disk utility and repair HD and permissions.
See if that helps.
You may need more powerful tools such as DiskWarrior to repair the drive if it's flaky.
If the computer is less than a year old, you may be able to get it fixed at a local Apple store. -
HT1338 White Mac book will not start up just shows gray screen with apple logo
White Mac book will not boot up gray screen only
There are some recovery steps for this condition outlined in the below article.
Mac OS X: Gray screen appears during startup
Maybe you are looking for
-
I wanted to get a bookmark I had saved in firefox so when I clicked on it mozilla crash reporter pops up telling me firefox has crashed and then it sends the report. Even when it gives me the option to start firefox in safe mode it gives me the same
-
How to add an image in a JPanel
Hi All, How to add an image in a JPanel and make it display. Thanks,
-
I would like to give a hidden tag a value. The value i need to give the hidden tag is from the previous jsp's hidden tag. how do i do this thank you.
-
Scrolling page whilst using mark up tool ??
In acrobat 6 whilst I was using the polygon fill or rectangle tools, I could use my mouse wheel to scroll and zoom. In acrobat 9 pro, when i am using any tools, i can't scroll or zoom. I have to move the mouse to the edge of the page to scroll which
-
Is it necessary to give local admin rights in Users PC to edit any document? Is there alternative available? Regards, Devesh..