When I sync ical on iphone with mac, every entry is multiplied.  What are the settings for syncing without repeats?

When I sync ical on iphone with mac, every entry is multiplied.  What are the settings for syncing without repeats?

If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections.

Similar Messages

  • My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac

    My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac and any suggestions?

    In the AirPort Utility, I selected the Advanced tab, and then selected Port Mapping.
    Q: What service do I choose from the drop-down menu? Also, where do I enter the two ports you mentioned? Public UDP Port(s)? Public TCP Port(s)? Private IP Address: Private UDPPort Private TCP Port?
    still confused, I guess. Thanks!

  • What are the settings for apn data and mms for iphone 4 on straight talk?

    what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

  • What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

    what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

    iCloud Mail Settings

  • What are the settings for iPhone, iPad and iMac to sync ical and contacts?

    How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

  • What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

    I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

    Opposite
    Then I saw your latest post
    Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
    If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
    not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
    kbps (also can be written Kbps) and is kilobits per second
    or
    Mbps which is megabits per second.
    Let us try this for one of your 1920 x 1080p24 videos.
    Go through the following workflow
    Manually set project preset...
    NTSC
    DSLR
    1080p
    DSLR 1080p24
    When you go to export your edited Timeline content, then use
    Share
    Computer
    QuickTime
    with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
    The essential settings under the Advanced Button/Video Tab
    Video Codec = H.264
    Frame Width = 1920
    Frame Height = 1080
    Frame Rate = 23.976
    Field Type = Progressive
    Aspect = Square Pixels (1.0)
    Now here is where we are going to experiment....
    Bitrate
    Check Mark next to Limit Data Rate to and type in 36000 before kbps
    note the file size of the export as well as the quality of the playback.
    Repeat the whole process but in export
    Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
    note the file size of the export as well as the quality of the playback.
    We will be watching for your results.
    Thanks.
    ATR

  • What are the settings for using an ATT mail account with iPad mail?

    Dear Folks,
    I just switched from earthlink to att, and I can't seem to get Mail configured quite right. I can send email just fine, via stmp.att.yahoo.com. But when I try to receive email it tells me it can't connect to pop.att.yahoo.com.
    Since I can send OK, I figure my email address and password have to be good, so most likely I'm using the wrong POP server address.
    Would someone like to give me a clue?
    Thanks!
    pax / Ctein

    Am having similar problems. Outgoing settings work on our iBook, using home wireless net, but the same settings do not work on our iPad. Why is this, and can anything be done to fix this?
    I am connected to our AT&T DSL modem via Ethernet cable. the modem is the wireless type, also.
    INCOMING: pop.att.yahoo.com
    USERNAME: [name]@sbcglobal.net
    PASSWORD:*************
    PORT: 995 w/Use SSL checked.
    OUTGOING: smtp.att.yahoo.com
    USERNAME: [name]@sbcglobal.net
    PASSWORD:*************
    PORT: 465 w/Use SSL checked
    I entered this info into the iPad before syncing it and have tried many permutations to no avail. Talking to AT&T did no good as they suggested coming out and changing settings in the DSL modem, which would have precluded using it normally, and would have made it impossible to connect elsewhere with the iPad. D'oh!
    Apple doesn't have an answer as we spent a couple of hours with one of their "GENIUSES" and after asking his supervisor about it we left with only the mobileme capability. We can access the internet tho, just not use our own email address.
    All I can say is HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP-!!
    P.S. A family member who just left Apple told me that the next OS is going to be called "LION, OS7!"

  • What are the settings for connecting to a Mac behind a wireless router?

    I have a client with an iMac. His Mac connects to the internet through a wireless router which gets its signal from a cable modem. My Mac is running 10.6. The remote iMac is running 10.5.
    How do I configure my Mac (Administrator) and the remote iMac so a connection can be made using Remote Desktop.
    Thanks!

    In the AirPort Utility, I selected the Advanced tab, and then selected Port Mapping.
    Q: What service do I choose from the drop-down menu? Also, where do I enter the two ports you mentioned? Public UDP Port(s)? Public TCP Port(s)? Private IP Address: Private UDPPort Private TCP Port?
    still confused, I guess. Thanks!

  • I have an iphone 4 with videos on it that I'd like to transfer to an IMac so that I can email them.  (the iphone isn't in use anymore.)  What's the procedure for transfering videos from an iphone to an iMac?

    I have an iphone 4 with videos on it that I'd like to transfer to an IMac so that I can email them.  (the iphone isn't in use anymore.)  What's the procedure for transfering videos from an iphone to an iMac?

    Connect the iPhone to your Mac with its USB cable and launch iPhoto.  In iPhoto you can select which files to upload into the library.  Once in the library export them out of iPhoto to a folder on the Desktop via File ➙ Export ➙ File Export  with Kind=Original. That will give you copies of the videos in the folder for use outside of iPhoto.
    If you want to bypass importing into iPhoto try launching Image Capture and manually upload the selected video files to the folder of your choice.
    OT

  • Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
    Appe does not ship outside of the countries where it sells the phones.

  • In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

    In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

    I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
    BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

  • What are the settings in Aperture to work with a Canon 9000?

    What are the settings in Aperture to work with a Canon 9000? Canon website says Aperture is not supported. Is it True?

    Do you mean the Canon PIXMA Pro9000 printer?
    If so, does this help?
    https://discussions.apple.com/thread/3681934?tstart=0

  • For the cm with multiple bps, what are the options for workaround?

    For the cm with multiple bps, what are the options for workaround?
    customer a purchases 1000
    and returns 800 at POS
    customer b was used at SAP related to  this transaction, purchase amounting to 2000,what can we do to apply the returns of customer a to customer b of 800 return transaction at pos?customer a and customer b code pertains to just one client---but were given different codes at POS and at SAP

    Hi,
    If one customer has two codes, you can only do manual journal entry to adjust their accounts.
    Thanks,
    Gordon

  • I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

    I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

    You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
    Updating to iOS 5 removed the hack and the unofficial unlock.
    All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
    Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source.

  • I can't sync/back up iPhone data to my computer b/c iPhone screen is shattered and i cant unlock it to enter in my passcode. How can I sync my broken iPhone with my computer and back up my data so I can sync and transfer the data to my replacement iPhone?

    I can't sync my iPhone and back up my data with my computer because iTunes says to enter the passcode into my iPhone to unlock it, but I am unable to unlock and enter in my passcode on my iPhone because the screen is shattered. I have my replacement iPhone with me and I'm not going to activate it until I can sync/get the data from my broken iPhone. I have the envelope to send my broken iPhone back to the Verizon store or whatever so that's not a problem. I just can't sync my old iPhone with my computer.
    Thanks.

    No I haven't synced my iPhone with the computer I'm currently using. The computer that I normally sync my iPhone with is being repaired.
    I read a nearly identical question to mine (in which you answered) and I found my the answer. Thanks!
    Now I have a few more questions: If I mail my broken iPhone to Asurion, will I be able to get my data off of my iPhone once Asurion has it? And what will happen to my old iPhone and the data on it if I activate my replacement iPhone? Will my broken iPhone just become de-activated and will the data be erased or lost or something? Could I still sync it (with the computer ir originally synced with) and back up the data?
    Thanks.

Maybe you are looking for

  • I can no longer hide apps on the App Store.

    HI, I've been having an issue with hiding apps on the App Store. Up until recently I used to be able to swipe and hide the app from my purchase list but now I can no longer do that. It does give me the option to swipe and hide but it doesn't hide it

  • How to bind register in Popup/Dialog to be filtered by ID

    Hello all, we use Oracle JDeveloper 11.1.2.3.0 and I'm relatively new to this development tool. We currently open a dialog from a table (bound to DataControl). The dialog is opened with a common ShowPopupBehavior on a commandImageLink and already sho

  • Query regarding meta chain in SAP BI

    Hi can any body solve the problem on this Meta chain in SAP BI.. There is a meta chain which holds three process chains say N1,N2,N3. in a sequential order. Now here as soon as the meta chain is triggered the process chain N1 is executed properly and

  • Restriction of charachteristic value in BEx

    Hi! I only know first 2 symbols of charachteristic value. How can I restrict charachteristic value in BEx by these symbols? For example, restrict by AB*.

  • E-mail Body Displays Only 1 Row From Select

    Because APEX doesn't currently (easily) support attachments to e-mail, I've created a process to call the apex_mail.send procedure that then displays specific criteria in the body of the e-mail. This is gathered via a cursor, etc. The problem is, my